arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2003.00263cs.CE
收藏

在拓扑优化中施加最小和最大构件尺寸、最小空腔尺寸以及实体构件之间的最小分隔距离

Imposing minimum and maximum member size, minimum cavity size, and minimum separation distance between solid members in topology optimization

Eduardo Fernández, Kai-ke Yang, Stijn Koppen, Pablo Alarcón, Simon Bauduin, Pierre Duysinx

摘要:

针对基于密度的拓扑优化问题,提出了一种组合方法,该方法可以同时实现固相最小长度尺度(MinSolid)、空相最小长度尺度(MinVoid)和固相最大长度尺度(MaxSolid)。MinSolid和MinVoid表示实体零件和型腔的尺寸必须大于指定的圆或球体的尺寸。这是通过基于侵蚀、中间和扩张设计的稳健设计方法来确保的。MaxSolid试图限制大于规定尺寸的实体零件的形成,这是通过局部体积限制来实施的。在本文的第一部分中,我们表明,通过按比例限制侵蚀,中间和扩张设计的最大尺寸,有可能获得优化设计,同时满足MinSolid,MinVoid和MaxSolid。然而,尽管获得了具有清晰边界的设计,但由于存在多个圆形空腔,一些结果可能难以制造,这些圆形空腔是由最大尺寸限制引入的,其唯一目的是避免结构中的厚实心构件。为了解决这个问题,在本文的第二部分中,我们提出了一个新的几何约束,旨在控制两个实体成员之间的最小间距,也称为最小间隙(MinGap)。从MinVoid开始,MinGap引入了不一定是圆形的大空隙区域。2D和3D测试用例表明,同时控制MinSolid、MinVoid、MaxSolid和MinGap可用于提高最大尺寸约束设计的可制造性。

英文摘要:

This paper focuses on density-based topology optimization and proposes a combined method to simultaneously impose Minimum length scale in the Solid phase (MinSolid), Minimum length scale in the Void phase (MinVoid) and Maximum length scale in the Solid phase (MaxSolid). MinSolid and MinVoid mean that the size of solid parts and cavities must be greater than the size of a prescribed circle or sphere. This is ensured through the robust design approach based on eroded, intermediate and dilated designs. MaxSolid seeks to restrict the formation of solid parts larger than a prescribed size, which is imposed through local volume restrictions. In the first part of this article, we show that by proportionally restricting the maximum size of the eroded, intermediate and dilated designs, it is possible to obtain optimized designs satisfying, simultaneously, MinSolid, MinVoid and MaxSolid. However, in spite of obtaining designs with crisp boundaries, some results can be difficult to manufacture due to the presence of multiple rounded cavities, which are introduced by the maximum size restriction with the sole purpose of avoiding thick solid members in the structure. To address this issue, in the second part of this article we propose a new geometric constraint that seeks to control the minimum separation distance between two solid members, also called the Minimum Gap (MinGap). Differently from MinVoid, MinGap introduces large void areas that do not necessarily have to be round. 2D and 3D test cases show that simultaneous control of MinSolid, MinVoid, MaxSolid and MinGap can be useful to improve the manufacturability of maximum size constrained designs.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑