This paper develops closed-loop tactile controllers for dexterous robotic manipulation with a dual-palm robotic system. Tactile dexterity is an approach to dexterous manipulation that plans for robot/object interactions that render interpretable tactile information for control. We divide the role of tactile control into two goals: 1) control the contact state between the end-effector and the object (contact/no-contact, stick/slip) by regulating the stability of planned contact configurations and monitoring undesired slip events; and 2) control the object state by tactile-based tracking and iterative replanning of the object and robot trajectories.
Key to this formulation is the decomposition of manipulation plans into sequences of manipulation primitives with simple mechanics and efficient planners. We consider the scenario of manipulating an object from an initial pose to a target pose on a flat surface while correcting for external perturbations and uncertainty in the initial pose of the object. We experimentally validate the approach with an ABB YuMi dual-arm robot and demonstrate the ability of the tactile controller to react to external perturbations.
Tactile information plays a critical role in human dexterity. It reveals useful contact information that may not be inferred directly from vision. In fact, humans can even perform in-hand dexterous manipulation without using vision. Can we enable the same ability for the multi-finger robot hand? In this paper, we present Touch Dexterity, a new system that can perform in-hand object rotation using only touching without seeing the object. Instead of relying on precise tactile sensing in a small region, we introduce a new system design using dense binary force sensors (touch or no touch) overlayi…
Blind Dexterity: Whole-Body Humanoid Manipulation via Pure Proprioception
TU Darmstadt（达姆施塔特工业大学）；German Research Center for AI (DFKI)（德国人工智能研究中心）；Tongji University（同济大学）；Shanghai Research Institute for Autonomous Intelligent Systems（上海自主智能系统研究院）；Robotics Institute Germany（德国机器人研究所）
Text2Touch: Tactile In-Hand Manipulation with LLM-Designed Reward Functions
School of Computer Science, University of Bristol, 2 Bristol Robotics Laboratory 3 School of Engineering Mathematics and Technology, University of Bristol（1 计算机科学学院，布里斯托尔大学 2 布里斯托尔机器人实验室 3 工程数学与技术学院，布里斯托尔大学）
Teaching dexterity to multi-fingered robots has been a longstanding challenge in robotics. Most prominent work in this area focuses on learning controllers or policies that either operate on visual observations or state estimates derived from vision. However, such methods perform poorly on fine-grained manipulation tasks that require reasoning about contact forces or about objects occluded by the hand itself. In this work, we present T-Dex, a new approach for tactile-based dexterity, that operates in two phases. In the first phase, we collect 2.5 hours of play data, which is used to train self…
FingerEye: Learning Dexterous Manipulation with Continuous Vision-Tactile Sensing
National University of Singapore（新加坡国立大学）；RoboScience（机器人科学）；Huazhong University of Science and Technology（华中科技大学）；South China University of Technology（华南理工大学）
Integrating and Evaluating Visuo-tactile Sensing with Haptic Feedback for Teleoperated Robot Manipulation
Technische Universität Darmstadt（达姆施塔特工业大学）；German Research Center for AI (DFKI)（德国人工智能研究中心）；Hessian Centre for Artificial Intelligence (Hessian.AI)（黑森州人工智能中心）；Centre for Cognitive Science (CogSci)（认知科学中心）；Nagoya University（名古屋大学）
Dipartimento di Ingegneria, Università degli Studi della Campania Luigi Vanvitelli（坎帕尼亚路易吉·凡维泰利大学工程系）；Institute for Artificial Intelligence, Universität Bremen（不来梅大学人工智能研究所）
Manipulation planning and control are relevant building blocks of a robotic system and their tight integration is a key factor to improve robot autonomy and allows robots to perform manipulation tasks of increasing complexity, such as those needed in the in-store logistics domain. Supermarkets contain a large variety of objects to be placed on the shelf layers with specific constraints, doing this with a robot is a challenge and requires a high dexterity. However, an integration of reactive grasping control and motion planning can allow robots to perform such tasks even with grippers with limi…
Grasp, Slide, Roll: Comparative Analysis of Contact Modes for Tactile-Based Shape Reconstruction
Amazon Fulfillment Technologies & Robotics（亚马逊履行技术与机器人）；Robotics Institute at Carnegie Mellon University（卡内基梅隆大学机器人研究所）；Siebel School of Computing and Data Science, University of Illinois at Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校Siebel计算与数据科学学院）
University of Liverpool（利物浦大学）；Northwest Institute of Mechanical and Electrical Engineering（西北机电工程研究所）
Tactile sensors can provide detailed contact in-formation that can facilitate robots to perform dexterous, in-hand manipulation tasks. One of the primitive but important tasks is surface following that is a key feature for robots while exploring unknown environments or workspace of inaccurate modeling. In this paper, we propose a novel end-to-end learning strategy, by directly mapping the raw tactile data acquired from a GelSight tactile sensor to the motion of the robot end-effector.Experiments on a KUKA youBot platform equipped with theGelSight sensor show that 80% of the actions generated b…
University of Bristol（布里斯托大学）；Bristol Robotics Laboratory（布里斯托机器人实验室）
Reproducing the capabilities of the human sense of touch in machines is an important step in enabling robot manipulation to have the ease of human dexterity. A combination of robotic technologies will be needed, including soft robotics, biomimetics and the high-resolution sensing offered by optical tactile sensors. This combination is considered here as a SoftBOT (Soft Biomimetic Optical Tactile) sensor. This article reviews the BRL TacTip as a prototypical example of such a sensor. Topics include the relation between artificial skin morphology and the transduction principles of human touch, t…
Istituto Italiano di Tecnologia（意大利技术研究院）；University of Naples Federico II（那不勒斯费德里科二世大学）
Manipulation in contrast to grasping is a trajectorial task that needs to use dexterous hands. Improving the dexterity of robot hands, increases the controller complexity and thus requires to use the concept of postural synergies. Inspired from postural synergies, this research proposes a new framework called kernelized synergies that focuses on the re-usability of the same subspace for precision grasping and dexterous manipulation. In this work, the computed subspace of postural synergies; parameterized by probabilistic movement primitives, is treated with kernel to preserve its grasping and …
Istituto Italiano di Tecnologia（意大利理工学院）；University of Naples Federico II（那不勒斯费德里科二世大学）；The Chinese University of Hong Kong（香港中文大学）
Handling non-rigid objects using robot hands necessities a framework that does not only incorporate human-level dexterity and cognition but also the multi-sensory information and system dynamics for robust and fine interactions. In this research, our previously developed kernelized synergies framework, inspired from human behaviour on reusing same subspace for grasping and manipulation, is augmented with visuo-tactile perception for autonomous and flexible adaptation to unknown objects. To detect objects and estimate their poses, a simplified visual pipeline using RANSAC algorithm with Euclide…
Manipulating cables is challenging for robots because of the infinite degrees of freedom of the cables and frequent occlusion by the gripper and the environment. These challenges are further complicated by the dexterous nature of the operations required for cable routing and assembly, such as weaving and inserting, hampering common solutions with vision-only sensing. In this paper, we propose to integrate tactile-guided low-level motion control with high-level vision-based task parsing for a challenging task: cable routing and assembly on a reconfigurable task board. Specifically, we build a l…
University of Bristol（布里斯托大学）；Bristol Robotics Laboratory（布里斯托机器人实验室）
This article describes a new way of controlling robots using soft tactile sensors: pose-based tactile servo (PBTS) control. The basic idea is to embed a tactile perception model for estimating the sensor pose within a servo control loop that is applied to local object features such as edges and surfaces. PBTS control is implemented with a soft curved optical tactile sensor (the BRL TacTip) using a convolutional neural network trained to be insensitive to shear. In consequence, robust and accurate controlled motion over various complex 3D objects is attained. First, we review tactile servoing a…
Learning representations in the joint domain of vision and touch can improve manipulation dexterity, robustness, and sample-complexity by exploiting mutual information and complementary cues. Here, we present Visuo-Tactile Transformers (VTTs), a novel multimodal representation learning approach suited for model-based reinforcement learning and planning. Our approach extends the Visual Transformer \cite{dosovitskiy2021image} to handle visuo-tactile feedback. Specifically, VTT uses tactile feedback together with self and cross-modal attention to build latent heatmap representations that focus at…
End-to-end reinforcement learning techniques are among the most successful methods for robotic manipulation tasks. However, the training time required to find a good policy capable of solving complex tasks is prohibitively large. Therefore, depending on the computing resources available, it might not be feasible to use such techniques. The use of domain knowledge to decompose manipulation tasks into primitive skills, to be performed in sequence, could reduce the overall complexity of the learning problem, and hence reduce the amount of training required to achieve dexterity. In this paper, we …
Robot touch can benefit from how humans perceive tactile textural information, from the stimulation mode to which tactile channels respond, then the tactile cues and encoding. Using a soft biomimetic tactile sensor (the TacTip) based on the physiology of the dermal-epidermal boundary, we construct two biomimetic tactile channels based on slowly-adapting SA-I and rapidly-adapting RA-I afferents, and introduce an additional sub-modality for vibrotactile information with an embedded microphone interpreted as an artificial RA-II channel. These artificial tactile channels are stimulated dynamically…
Worcester Polytechnic Institute（伍斯特理工学院）；Imperial College London（伦敦帝国理工学院）
Attempts to achieve robotic Within-Hand-Manipulation (WIHM) generally utilize either high-DOF robotic hands with elaborate sensing apparatus or multi-arm robotic systems. In prior work we presented a simple robot hand with variable friction robot fingers, which allow a low-complexity approach to within-hand object translation and rotation, though this manipulation was limited to planar actions. In this work we extend the capabilities of this system to 3D manipulation with a novel region-based WIHM planning algorithm and utilizing extrinsic contacts. The ability to modulate finger friction enha…
École de technologie supérieure（高等技术学院）；Bordeaux Institute of Technology（波尔多理工学院）；ENSEIRB-MATMECA（波尔多国立高等电子、信息与无线电通信学院-波尔多国立高等机械与航空技术学院）
Combining 3D vision with tactile sensing could unlock a greater level of dexterity for robots and improve several manipulation tasks. However, obtaining a close-up 3D view of the location where manipulation contacts occur can be challenging, particularly in confined spaces, cluttered environments, or without installing more sensors on the end effector. In this context, this paper presents StereoTac, a novel vision-based sensor that combines tactile sensing with 3D vision. The proposed sensor relies on stereoscopic vision to capture a 3D representation of the environment before contact and uses…
The sense of touch is fundamental to human dexterity. When mimicked in robotic touch, particularly by use of soft optical tactile sensors, it suffers from distortion due to motion-dependent shear. This complicates tactile tasks like shape reconstruction and exploration that require information about contact geometry. In this work, we pursue a semi-supervised approach to remove shear while preserving contact-only information. We validate our approach by showing a match between the model-generated unsheared images with their counterparts from vertically tapping onto the object. The model-generat…
Robust Model-Based In-Hand Manipulation with Integrated Real-Time Motion-Contact Planning and Tracking
Department of Automation, Tsinghua University, Beijing, China（自动化系，清华大学，北京，中国）；Department of Mechanical Engineering, University of California, Berkeley, CA, USA（机械工程系，加州大学伯克利分校，CA，美国）
