We experimentally study a fiber-based optical ring cavity integrated with a mechanical resonator mirror and an optical amplifier. The device exhibits a variety of intriguing nonlinear effects including synchronization and self-excited oscillation. Passively generated optical pulses are observed when the frequency of the optical ring cavity is tuned very close to the mechanical frequency of the suspended mirror. The optical power at the threshold of this process of mechanical mode locking is found to be related to quantum noise of the optical amplifier.
The techniques of cavity optomechanics have enabled significant achievements in precision sensing, including the detection of gravitational waves and the cooling of mechanical systems to their quantum ground state. Recently, the inherent non-linearity in the optomechanical interaction has been harnessed to explore synchronization effects, including the spontaneous locking of an oscillator to a reference injection signal delivered via the optical field. Here, we present the first demonstration of a radiation-pressure driven optomechanical system locking to an inertial drive, with actuation prov…
We propose a novel scheme for realizing single-photon blockade in a weakly driven hybrid cavity optomechanical system consisting of a nonlinear photonic crystal. Sub-Poissonian statistics is realized even when the single-photon optomechanical coupling strength is smaller than the decay rate of the optical mode. The scheme relaxes the requirement of strong coupling for photon blockade in optomechanical systems. It is shown that photon blockade could be generated at the telecommunication wavelength.
A theoretical consideration of the so-called "membrane-in-the-middle" optomechanical cavity revealed that it undergoes a spontaneous symmetry breaking as a function of the transparency of the membrane. Such typical features of this phenomenon as a square-root development of the order parameter and divergency of the critical susceptibility were identified. In the contract to classical spontaneous-symmetry-breaking systems of ferromagnets and ferroelectrics, in the considered system, this divergency remains, due to interference effects, an "internal" property of the system, which does not reveal…
We present the design of an optomechanical crystal nanobeam cavity that combines finite-element simulation with numerical optimization, and considers the optomechanical coupling arising from both moving dielectric boundaries and the photo-elastic effect. Applying this methodology results in a nanobeam with an experimentally realized intrinsic optical Q-factor of 1.2x10^6, a mechanical frequency of 5.1GHz, a mechanical Q-factor of 6.8x10^5 (at T=10K), and a zero-point-motion optomechanical coupling rate of g=1.1MHz.
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also intrinsically fiber-coupled and uses glass ferrules for passive alignment. These improvements will greatly simplify the use of optomechanical systems, particularly in cryogenic settings. At room temperat…
We review and study the roles of quantum and classical fluctuations in recent cavity-optomechanical experiments which have now reached the quantum regime (mechanical phonon occupancy < 1) using resolved sideband laser cooling. In particular, both the laser noise heating of the mechanical resonator and the form of the optically transduced mechanical spectra, modified by quantum and classical laser noise squashing, are derived under various measurement conditions. Using this theory, we analyze our recent ground-state laser cooling and motional sideband asymmetry experiments with nanoscale optome…
We study the role of stimulated Brillouin scattering in a fiber cavity by numerical simulations and a simple theoretical model and find good agreement between experiment, simulation and theory. We also investigate an optomechanical system based on a fiber cavity in the presence on the nonlinear Brillouin scattering. Using simulation and theory, we show that this hybrid optomechanical system increases optomechanical damping for low mechanical resonance frequencies in the unresolved sideband regime. Furthermore, optimal damping occurs for blue detuning in stark contrast to standard optomechanics…
We study entanglement of the cavity modes in a double-cavity optomechanical system in strong-coupling regime. The system consists of two optomechanical systems coupled by a single photon hopping between them. With the radiation pressure of the photon, entanglement of the cavity modes can be generated. The concurrence between the cavity modes is at least twice larger than that between the mechanical modes. Moreover, when we change the ratio between coupling strength and resonant frequency of mechanical modes, the entanglement in cavity and mechanical modes are influenced differently.
We study self-excited oscillation (SEO) in an on-fiber optomechanical cavity. While the phase of SEO randomly diffuses in time when the laser power that is injected into the cavity is kept constant, phase locking may occur when the laser power is periodically modulated in time. We investigate the dependence of phase locking on the amplitude and frequency of the laser power modulation. We find that phase locking can be induced with a relatively low modulation amplitude provided that the ratio between the modulation frequency and the frequency of SEO is tuned close to a rational number of relati…
We theoretically study a strongly-driven optomechanical system which consists of a passive optical cavity and an active mechanical resonator. When the optomechanical coupling strength is varied, phase transitions, which are similar those observed in $\mathcal{PT}$-symmetric systems, are observed. We show that the optical transmission can be controlled by changing the gain of the mechanical resonator and loss of the optical cavity mode. Especially, we find that: (i) for balanced gain and loss, optical amplification and absorption can be tuned by changing the optomechanical coupling strength thr…
Optomechanical systems offer new opportunities in quantum information processing and quantum sensing. Many solid-state quantum devices operate at millikelvin temperatures -- however, it has proven challenging to operate nanoscale optomechanical devices at these ultralow temperatures due to their limited thermal conductance and parasitic optical absorption. Here, we demonstrate a two-dimensional optomechanical crystal resonator capable of achieving large cooperativity $C$ and small effective bath occupancy $n_b$, resulting in a quantum cooperativity $C_{\text{eff}}\equiv C/n_b \approx 1.3 > 1$ …
We describe and demonstrate a method to control a detuned movable-mirror Fabry-Perot cavity using radiation pressure in the presence of a strong optical spring. At frequencies below the optical spring resonance, self-locking of the cavity is achieved intrinsically by the optomechanical (OM) interaction between the cavity field and the movable end mirror. The OM interaction results in a high rigidity and reduced susceptibility of the mirror to external forces. However, due to a finite delay time in the cavity, this enhanced rigidity is accompanied by an anti-damping force, which destabilizes th…
Mechanical motion of photonic devices driven by optical forces provides a profound means of coupling between optical fields. The current focus of these optomechanical effects has been on cavity optomechanics systems in which co-localized optical and mechanical modes interact strongly to enable wave-mixing between photons and phonons and backaction cooling of mechanical modes. Alternatively, extended mechanical modes can also induce strong nonlocal effects on propagating optical fields or multiple localized optical modes at distances. Here, we demonstrate a novel multi-cavity optomechanical dev…
Photon statistics in a weakly driven optomechanical photonic crystal cavity, with Kerr-type nonlinearity, is analyzed both analytically and numerically. Single-photon blockade effect is demonstrated via calculations of the zero-time-delay second-order correlation function $g^{(2)}(0)$. The analytical results obtained by solving the Schrödinger equation are in complete conformity with the results obtained through numerical solution of the quantum master equation. The experimental feasibility with state-of-the-art device parameters is discussed. It is observed that photon blockade could be gener…
We study a fully on-fiber optomechanical cavity and characterize its performance as a sensor. The cavity is formed by patterning a suspended metallic mirror near the tip of an optical fiber and by introducing a static reflector inside the fiber. Optically induced self-excited oscillation (SEO) is observed above a threshold value of the injected laser power. The SEO phase can be synchronized by periodically modulating the optical power that is injected into the cavity. Noise properties of the system in the region of synchronization are investigated. Moreover, the spectrum is measured near diffe…
We demonstrate coherent control of optomechanically induced transparency and Fano resonances in a four mirror macroscopic optomechanical cavity, with two movable mirrors, each driven by an external mechanical pump. The variable control of the amplitude and phase of the coherent mechanical pumps provides a means of tuning the shape and nature of the Fano profiles. Further, our scheme shows the occurrence of tunable optomechanical features, even at very low mechanical driving field amplitudes, in macroscopic optomechanical cavities.
Cavity optomechanics offers powerful methods for controlling optical fields and mechanical motion. A number of proposals have predicted that this control can be extended considerably in devices where multiple cavity modes couple to each other via the motion of a single mechanical oscillator. Here we study the dynamical properties of such a multimode optomechanical device, in which the coupling between cavity modes results from mechanically-induced avoided crossings in the cavity's spectrum. Near the avoided crossings we find that the optical spring shows distinct features that arise from the i…
The mechanical properties of light have found widespread use in the manipulation of gas-phase atoms and ions, helping create new states of matter and realize complex quantum interactions. The field of cavity-optomechanics strives to scale this interaction to much larger, even human-sized mechanical objects. Going beyond the canonical Fabry-Perot cavity with a movable mirror, here we explore a new paradigm in which multiple cavity-optomechanical elements are wired together to form optomechanical circuits. Using a pair of optomechanical cavities coupled together via a phonon waveguide we demonst…
The optical bistability (OB) in a two-mode optomechanical system with a Bose-Einstein condensate (BEC) is studied. By investigating the behavior of steady state solutions, we show that how OB develops in the system for a certain range of cavity-pump detunings and pump amplitudes. We then investigate the effects of the decay rate of the cavity photons and coupling strength between the cavity and the BEC as well as the pump-atom detuning on the optical behaviour of the system. We find that one can control the OB threshold and width of the bistability curve via adjusting properly the decay rate, …
We study the photon statistics of a cavity linearly coupled to an optomechanical system via second order correlation functions. Our calculations show that the cavity can exhibit strong photon antibunching even when optomechanical interaction in the optomechanical system is weak. The cooperation between the weak optomechanical interaction and the destructive interference between different paths for two-photon excitation leads to the efficient antibunching effect. Compared with the standard optomechanical system, the coupling between a cavity and an optomechanical system provides a method to rel…
Using electromagnetically induced transparency we show how the opto-mechanical systems can be used both as memory elements as well as for the transduction of optical fields. We use a double cavity optomechanical system which facilitates such applications. By tuning the frequency of the second cavity one can produce output fields at a variety of frequencies. We present analytical results for the steady state behavior which is controlled by the power and the detuning of the field driving the second cavity.
We investigate a theoretical demonstration of perfect frequency conversion in an optomechanical system in the weak coupling regime without a Stokes side-band. An optomechanical cavity illuminated by a weak probe field generates two side-modes, differentiating from the original signal by a phonon frequency. We report the presence of a special combination of parameters in the weak-coupling regime, where Stokes side-mode vanishes exactly. Only the anti-Stokes mode is observed with a few hundreds Hz spectral bandwidth of the probe field. Emergence of this special point is totally unrelated with th…
Mechanical rotation and oscillation have far lower frequencies than light does; thus they are not coupled to each other conventionally. In this Letter, we show the torsional mechanical oscillation of an optical cavity can be coupled to the optical modes by introducing birefringence, which produces nondegenerate modes in the cavity: ordinary and extraordinary rays. Twisting the cavity mixes them and modulates the electromagnetic energy. We find torsional optomechanical Hamiltonian by quantising the total energy and reveal the torsional oscillation can be resonantly driven by light.
We present an experimental study of an optomechanical system formed by a vibrating thin semi-transparent membrane within a high-finesse optical cavity. We show that the coupling between the optical cavity modes and the vibrational modes of the membrane can be tuned by varying the membrane position and orientation. In particular we demonstrate a large quadratic dispersive optomechanical coupling in correspondence with avoided crossings between optical cavity modes weakly coupled by scattering at the membrane surface. The experimental results are well explained by a first order perturbation trea…
We propose a scheme that can generate tunable optomechanically induced transparency in a hybrid piezooptomechanical cavity system. The system is composed of a high-quality planar distributed Bragg reflector cavity modified with an embedded Gaussian-shaped defect. Moreover, interdigitated transducers are fabricated on the surface of the cavity to generate surface acoustic waves. Under the actuation of the surface acoustic wave, the upper Bragg mirrors can be vibrated as a bulk acoustic resonator, and the distributed Bragg reflector cavity becomes a standard three-level optomechanical system. In…
We investigate theoretically the effect of optical feedback from a cavity containing an ultracold two level atomic ensemble, on the bistable behavior shown by mean intracavity optical field and the ground state cooling effect of the mechanical oscillator in an optomechanical cavity resonator. The optical bistability can be controlled by tuning the frequency and power of the single driving laser as well as by varying the atom-cavity coupling strength in the atomic cavity. Study of the cooling of the mechanical oscillator, in both good and bad cavity limits, reveals that the hybrid system is mor…
We experimentally study an optomechanical cavity consisting of an oscillating mechanical resonator embedded in a superconducting microwave transmission line cavity. Tunable optomechanical coupling between the mechanical resonator and the microwave cavity is introduced by positioning a niobium-coated single mode optical fiber above the mechanical resonator. The capacitance between the mechanical resonator and the coated fiber gives rise to optomechanical coupling, which can be controlled by varying the fiber-resonator distance. We study radiation pressure induced self-excited oscillations as a …
Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optomechanical spring effect and the latter governing the optomechanical damping. At high enough optical input powers, we show that the photothermal force drives the mechanical resonator into self-oscillati…
We theoretically propose a scheme to realize an all-optically controlled quantum optomechanical transistor based on a cavity-optomechanical system, where the cavity photons interfere with the input signal photons while the pump field controls the transmission spectrum of the signal laser. Theoretical analysis shows such a quantum optomechanical transistor can be switched on or off by turning on or off the pump laser, which corresponds to amplification or attenuation of the signal laser, respectively. The results further demonstrate that the output signal gain is enhanced abruptly with increasi…
We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in principle, any photonic chip with refractive index greater than that of the optical fiber. Here we demonstrate single-sided cavity coupling with a total fiber-to-cavity optical power coupling efficiency of…
We study the optical cooling of the resonator mirror in a cavity-optomechanical system that contains an optical gain medium. We find that the optical damping rate is vanishingly small for an incoherently pumped laser above threshold. In the presence of an external coherent drive however, the optical damping rate can be enhanced substantially with respect to that of a passive cavity. We show that the strength of the incoherent pump provides a conduit to tune the damping rate and the minimum attainable phonon number with the same radiation pressure force, and the latter can be lowered from that …
We propose a scheme that can generate a tunable double optomechanically induced transparency (OMIT) in a hybrid optomechanical cavity system, in which the mechanical resonator of an optomechanical cavity is coupled to an additional mechanical resonator, and the additional mechanical resonator can be driven by a weak external coherently mechanical driving field. We show that both the intensity and the phase of the the external mechanical driving field can control the propagation of the probe field, including changing the transmission spectrum curve from a double-window to a single-window. Our s…
We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon in a N-cavity optomechanical system doped with a pair of Rydberg atoms with the presence of a strong pump field and a weak probe field applied to the Nth cavity. 2N-1(N<10) number OMIT windows can be observed in the output field when N cavities coupled with N mechanical oscillators, respectively. But, the mechanical oscillators coupled with different even-odd label cavities lead to different effect on OMIT. On the other hand, two additional transparent windows (extra resonances) are presented, if two Rydbe…
The rigorous resource framework of quantum coherence has been set up recently and excited a wide variety of interests. Here we show that a quantum cavity optomechanical system, as an emerging platform, can behave with a certain value of quantum coherence at a macroscopic scale. We also find that the difference between the total optomechanical coherence and the sum of the optical and the mechanical coherence just equals their mutual information. Motivated by the detection of the optomechanical entanglement, an experimentally feasible scheme to probe the optomechanical coherence is proposed.
We study the cavity mode frequencies of a Fabry-Pérot cavity containing two vibrating dielectric membranes. We derive the equations for the mode resonances and provide approximate analytical solutions for them as a function of the membrane positions, which act as an excellent approximation when the relative and center-of-mass position of the two membranes are much smaller than the cavity length. With these analytical solutions, one finds that extremely large optomechanical coupling of the membrane relative motion can be achieved in the limit of highly reflective membranes when the two membrane…
We study the physical properties of double-cavity optomechanical system in which the mechanical resonator interacts with one of the coupled cavities and another cavity is used as an auxiliary cavity. The model can be expected to achieve the strong optomechanical coupling strength and overcome the optomechanical cavity decay, simultaneously. Through the coherent auxiliary cavity interferences, the steady-state squeezing of mechanical resonator can be generated in highly unresolved sideband regime. The validity of the scheme is assessed by numerical simulation and theoretical analysis of the ste…
We study self-excited oscillations (SEO) in an on-fiber optomechanical cavity. Synchronization is observed when the optical power that is injected into the cavity is periodically modulated. A theoretical analysis based on the Fokker-Planck equation evaluates the expected phase space distribution (PSD) of the self-oscillating mechanical resonator. A tomography technique is employed for extracting PSD from the measured reflected optical power. Time-resolved state tomography measurements are performed to study phase diffusion and phase locking of the SEO. The detuning region inside which synchron…
Here, we study the controllable optical responses in a two-cavity optomechanical system, especially on the $\mathit{perfect}$ optomechanically induced transparency (OMIT) in the model which has never been studied before. The results show that the perfect OMIT can still occur even with a large mechanical damping rate, and at the perfect transparency window the long-lived slow light can be achieved. In addition, we find that the conversion between the perfect OMIT and optomechanically induced absorption can be easily achieved just by adjusting the driving field strength of the second cavity. We …
A cavity optomechanical system is initiated by a radiation pressure of a cavity field onto a mirror element acting as a quantum resonator. This radiation pressure can control the thermodynamic character of the mirror to some extent, such as cooling its effective temperature. Here we show that by properly engineering the spectral density of a thermal heat bath that interacts with a quantum system, the evolution of the quantum system can be effectively turned on and off. Inside a cavity optomechanical system, when the heat bath is realized by a multi-mode oscillator modeling of the mirror, this …
We analytically study the optomechanically induced transparency (OMIT) in the $N$-cavity system with the \textit{N}th cavity driven by pump, probing laser fields and the \textit{1}st cavity coupled to mechanical oscillator. We also consider that one atom could be trapped in the \textit{i}th cavity. Instead of only illustrating the OMIT in such a system, we are interested in how the number of OMIT windows is influenced by the cavities and the atom and what roles the atom could play in different cavities. In the resolved sideband regime, we find that, the number of cavities precisely determines …
Cavity Optomechanical system is speedily approaching the regime where the radiation pressure of a single photon displaces the moving mirror. In this paper, we consider a cavity optomechanical system where the cavity field is driven by an external field. In the limit of weak mirror-cavity couplings, we calculate analytically the reflection and transmission rates for cavity field and discuss the effects of mirror-cavity coupling on the reflection and transmission.
We analyze a cavity optomechanical setup, in which position of an oscillator modulates optical loss. We show that in such setup quantum limited position measurements can be performed if the external cavity coupling rate matches the optical loss rate, a condition known as "critical coupling". Additionally, under this condition the setup exhibits a number of potential benefits for practical operation including the complete absence of dynamical backaction, and hence optomechanical instability, and rejection of classical laser noise and thermal fluctuations of cavity frequency from the measurement…
The synchronization of the motion of microresonators has attracted considerable attention. Here we present theoretical methods to synchronize the chaotic motion of two optical cavity modes in an optomechanical system, in which one of the optical modes is strongly driven into chaotic motion and is coupled to another weakly-driven optical mode mediated by a mechanical resonator. In these optomechanical systems, we can obtain both complete and phase synchronization of the optical cavity modes in chaotic motion, starting from different initial states. We find that complete synchronization of chaos…
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical crystal, which has been placed in the microwave electric field maximum. This allows the microwave cavity to actuate the gigahertz-frequency mechanical breathing mode in the optomechanical crystal through…
Quantum manipulation of macroscopic mechanical systems is of great interest in both fundamental physics and applications ranging from high-precision metrology to quantum information processing. A crucial goal is to cool the mechanical system to its quantum ground state. In this review, we focus on the cavity optomechanical cooling, which exploits the cavity enhanced interaction between optical field and mechanical motion to reduce the thermal noise. Recent remarkable theoretical and experimental efforts in this field have taken a major step forward in preparing the motional quantum ground stat…
Using light to measure an object's motion is central to operating mechanical sensors that probe forces and fields. Cavity optomechanical systems embed mechanical resonators inside optical resonators. This enhances the sensitivity of optomechanical measurements, but only if the mechanical resonator does not spoil the properties of the optical cavity. For example, cavity optomechanical detection of resonators made from optically absorbing materials, or whose geometry does not possess suitable spatial symmetry, is challenging. Here we demonstrate a system that overcomes challenges in measuring hi…
We present an experimental study of dynamical back-action cooling of the fundamental vibrational mode of a thin semitransparent membrane placed within a high-finesse optical cavity. We study how the radiation pressure interaction modifies the mechanical response of the vibrational mode, and the experimental results are in agreement with a Langevin equation description of the coupled dynamics. The experiments are carried out in the resolved sideband regime, and we have observed cooling by a factor 350 We have also observed the mechanical frequency shift associated with the quadratic term in the…
We demonstrate optimal state estimation for a cavity optomechanical system through Kalman filtering. By taking into account nontrivial experimental noise sources, such as colored laser noise and spurious mechanical modes, we implement a realistic state-space model. This allows us to obtain the conditional system state, i.e., conditioned on previous measurements, with minimal least-square estimation error. We apply this method for estimating the mechanical state, as well as optomechanical correlations both in the weak and strong coupling regime. The application of the Kalman filter is an import…
We investigate the optical behavior of a single Laguerre-Gaussian cavity optomechanical system consisting of two mechanically rotating mirrors. We explore the effects of various physical parameters on the double optomechanically induced transparency (OMIT) of the system and provide a detailed explanation of the underlying physical mechanism. We show that the momentum is not the cause of the current double-OMIT phenomena; rather, it results from the orbital angular momentum between the optical field and the rotating mirrors. Additionally, the double-OMIT is simply produced using a single Laguer…
We show how stationary entanglement between an optical cavity field mode and a macroscopic vibrating mirror can be generated by means of radiation pressure. We also show how the generated optomechanical entanglement can be quantified and we suggest an experimental readout-scheme to fully characterize the entangled state. Surprisingly, such optomechanical entanglement is shown to persist for environment temperatures above 20K using state-of-the-art experimental parameters.
We theoretically investigate the optical and mechanical properties of a double cavity optomechanical system with one stationary and two harmonically bound mirrors. We show that it is possible for the mechanical mirrors in this system to posses negative effective mass. Working within the strong coupling and the resolved sideband regime, we show that the displacement of the middle resonator is multistable under certain constrains. We also point to the existence of optomechanically induced absorption (OMIA) and Fano resonance. Owing to the negative effective mass, our scheme can be exploited in t…
We theoretically investigate the real-time emission spectrum of a two-level atom coupled to an optomechanical cavity (OMC). Using quantum trajectory approach we obtain the single-photon time-dependent spectrum in this hybrid system where the influence of a strong atom-cavity coupling and a strong optomechanical interaction are studied. We find a dressed state picture can explain the spectra by predicting the exact peak locations as well as the relative peak heights. In our analysis we also include the effect of mechanical losses (under weak mechanical damping limit) and single-photon loss thro…
Optomechanical arrays made of structured flexible dielectrics are a promising system for exploring quantum and many-body optomechanical phenomena. We generalize investigations of the optomechanical properties of periodic arrays of one-dimensional scatterers in optical resonators to the case of vibrating membranes whose thickness is not necessarily small with respect to the optical wavelength of interest. The array optical transmission spectrum and its optomechanical coupling with a linear Fabry-Perot cavity field are investigated both analytically and numerically.
We give a theoretical study of a double-cavity system in which a mechanical resonator beam is coupled to two cavity modes on both sides through radiation pressures. The indirect coupling between the cavities via the resonator sets up a correlation in the optomechanical entanglements between the two cavities with the common resonator. This correlation initiates an entanglement transfer from the intracavity photon-phonon entanglements to an intercavity photon-photon entanglement. Using numerical solutions, we show two distinct regimes of the optomechanical system, in which the indirect entanglem…
Electromagnetically induced transparency has great theoretical and experimental importance in many physics subjects, such as atomic physics, quantum optics, and more recent cavity optomechanics. Optical delay is the most prominent feature of electromagnetically induced transparency, and in cavity optomechanics optical delay is limited by mechanical dissipation rate of sideband-resolved mechanical modes. Here we demonstrate a cascaded optical transparency scheme by leveraging the parametric phonon-phonon coupling in a multimode optomechanical system, where a low damping mechanical mode in the u…
Nonreciprocal devices are indispensable for building quantum networks and ubiquitous in modern communication technology. Here, we use optomechanical interaction and linearly-coupled interaction to realize optical nonreciprocal transmission in a double-cavity optomechanical system. The scheme relies on the interference between the two interactions. We derive the essential conditions to realize perfect optical nonreciprocity in the system, and analyse the properties of optical nonreciprocal transmission and the output fields from mechanical mode. These results can be used to control optical tran…
A scheme of single-photon multi-port router is put forward by coupling two optomechanical cavities with waveguides. It is shown that the coupled two optomechanical cavities can exhibit photon blockade effect, which is generated from interference of three mode interaction. A single-photon travel along the system is calculated. The results show that the single photon can be controlled in the multi-port system because of the radiation pressure, which should be useful for constructing quantum network.
$\mathcal{PT}$-symmetry-breaking enhanced cavity optomechanical magnetometer is proposed, which is achieved by monitoring the change of intensity of a nonlinear four-wave mixing (FWM) process in a gain-cavity-assisted cavity optomechanical system (COMS). Compared with the traditional single loss COMS, the FWM intensity can be enhanced by two orders of magnitude when the gain-cavity-assisted COMS operates at the $\mathcal{PT}$-symmetry-breaking phase. Meanwhile, the sensitivity of magnetic field sensing can be increased from $10^{-9}$T to $10^{-11}$T. This originally comes from the fact that th…
We propose a novel scheme to simulate Z_2 topological insulators via one-dimensional (1D) cavity optomechanical cells array. The direct mapping between 1D cavity optomechanical cells array and 2D quantum spin Hall (QSH) system can be achieved by using diagonalization and dimensional reduction methods. We show that the topological features of the present model can be captured using a 1D generalized Harper equation with an additional SU(2) guage structure. Interestingly, spin pumping of effective photon-phonon bosons can be naturally derived after scanning the additional periodic parameter, whic…
