In this paper, we explore the topological behavior of a two-dimensional honeycomb photonic crystal (PC) based on the presence of double Dirac-cone connected the orbitals p and d, due to the C6 point group symmetry of the hexagonal PCs. Removing the four-fold degeneracies between the bands at the Dirac point can be achieved by introducing three small dielectric rods near the bigger ones to realize the perturbed PCs with the C3 point group symmetry with different topological features. By proposing the unique structure involving two PCs with different topological effects, one may study the one-way light distribution along the local boundary in spite of the defects, cavities, and disorders. Moreover, we investigate the variation of the transmitted intensity values under different defect conditions and realize that the size, location and material type affect the transmitted light. In the other words, tunable intensity of the edge states can be achieved through adjusting the defects such that by increasing the radius of rods, the intensity of the edge states can be enhanced or by increasing their distance from the unit cell center, the intensity will be decreased. For example, by increasing the radius of one of the rods, the intensity of the edge states is increased up to the 130%. Additionally, by moving the position of the mentioned rod along the direction, x, the intensity of the edge states will be decreased to 82.08%. Finally, topological rhombic resonator enables unidirectional filtering of guided mode. The fact that different light manipulation scenarios can be realized provides a unique aspect for topological photonic insulators.
We present a graphene photodetector for telecom applications based on a silicon photonic crystal defect waveguide. The photonic structure is used to confine the propagating light in a narrow region in the graphene layer to enhance light-matter interaction. Additionally, it is utilized as split-gate electrode to create a pn-junction in the vicinity of the optical absorption region. The photonic crystal defect waveguide allows for optimal photo-thermoelectric conversion of the occurring temperature profile in graphene into a photovoltage due to additional silicon slabs on both sides of the waveg…
We experimentally demonstrate topological slow light waveguides in valley photonic crystals (VPhCs). We employed a bearded interface formed between two topologically-distinct VPhCs patterned in an air-bridged silicon slab. The interface supports both topological and non-topological slow light modes below the light line. By means of optical microscopy, we observed light propagation in the topological mode in the slow light regime with a group index $n_{\rm g}$ over $30$. Furthermore, we confirmed light transmission via the slow light mode even under the presence of sharp waveguide bends. In com…
Slow light propagation in structured materials is a highly promising approach for realizing on-chip integrated photonic devices based on enhanced optical nonlinearities. One of the most successful research avenues consists in engineering the band dispersion of light-guiding photonic crystal (PC) structures. The primary goal of such devices is to achieve slow-light operation over the largest possible bandwidth, with large group index, minimal index dispersion, and constant transmission spectrum. Here, we report on the experimental demonstration of to date record high GBP in silicon-based couple…
We present a detailed analysis of a coupler based on the Luneburg lens to couple a silica waveguide to a photonic crystal waveguide. The dependence of coupling efficiency on the lens's truncation, cut position of the photonic crystal structure, coupler tip width, and misalignment are investigated with two-dimensional finite element method. We implement the lens with a concentric ring-based multilayer structure. We also present a method to replace layers with very narrow widths by layers of predetermined minimum widths in the structure of the lens. The coupling loss of the designed 2.7 $μm$-lon…
Integrated photonic circuits based on suspended photonic rib waveguides, which can be used for coherent trapping, guiding, and splitting of ultra-cold neutral atoms in two-colour evanescent light fields near their surfaces, are described. Configurations of quantum inertial sensors based on such integrated atomo-photonic waveguides, which are simultaneously guiding photons and atoms along the same paths, are presented. The difference between free-space and guided atom interferometers in the presence of external forces is explained. The theoretical and technological challenges, to be overcome on…
We propose and experimentally demonstrate a photonic routing architecture that can efficiently utilize the space of multi-plane (3D) photonic integration. A wafer with three planes of amorphous silicon waveguides was fabricated and characterized, demonstrating $<3\times10^{-4}$ dB loss per out-of-plane waveguide crossing, $0.05 \pm 0.02 $ dB per interplane coupler, and microring resonators on three planes with a quality factors up to $8.2 \times 10^{4}$. We also explore a phase velocity mapping strategy to mitigate the crosstalk between co-propagating waveguides on different planes. These resu…
Periodic or gradient subwavelength structures are basic configurations of photonic crystals and metamaterials. While the numerical simulations predict trivial loss, but the fabricated photonic crystal waveguides by E-beam lithography and standard dry etching shows unacceptable loss beyond 10 dB. Nanofabrication variation introduced geometric inhomogeneity is considered as the primary cause of the deleterious performance. The deep UV photolithography in CMOS foundry is a large-scale parallel processing, which can significantly suppress the fabrication-related inhomogeneous offsets and thus the …
Effective integration of 2D materials such as monolayer transition metal dichalcogenides (TMDs) into photonic waveguides and integrated circuits is being intensely pursued due to the materials' strong exciton-based optical response. Here, we present a platform where a WS$_{2}$-hBN 2D heterostructure is directly integrated into the photonic mode-center of a novel polymer ridge waveguide. FDTD simulations and collection of photoluminescence from the guided mode indicate that this system exhibits significantly improved waveguide-emitter coupling over a previous elastomer platform. This is facilit…
One of the main steps towards large-scale quantum photonics consists of the integration of single photon sources (SPS) with photonic integrated circuits (PICs). For that purpose, the PICs should offer an efficient light coupling and a high preservation of the indistinguishability of photons. Therefore, optimization of the indistinguishability through waveguide design is especially relevant. In this work we have developed an analytical model to calculate the coupling and the indistinguishability of an ideal point-source quantum emitter coupled to a photonic waveguide depending on source orienta…
Low-index contrast waveguides such as silica waveguides are indispensable part of passive integrated optical components. Reducing the bending radius of silica waveguides with low bend loss is vital in miniaturizing silica planar lightwave circuits. The Eaton lens is a gradient index lens that can bend parallel light rays by 90°, 180°, or 360°. We present a low-loss and compact 90° waveguide bend with a radius of 9 $μ$m designed by truncating the Eaton lens. The performance of the designed bend, implemented by graded photonic crystal, was evaluated by full-wave two-dimensional finite element me…
Lithium niobate on insulator (LNOI) is an emerging photonic platform with great promises for future optical communications, nonlinear optics and microwave photonics. An important integrated photonic building block, active waveguide amplifiers, however, is still missing in the LNOI platform. Here we report an efficient and compact waveguide amplifier based on erbium-doped LNOI waveguides, realized by a sequence of erbium-doped crystal growth, ion slicing and lithography-based waveguide fabrication. Using a compact 5-mm-long waveguide, we demonstrate on-chip net gain of > 5 dB for 1530-nm signal…
Slow light waveguides are advantageous for implementing high-performance single-photon sources required for scalable operation of integrated quantum photonic circuits (IQPCs), though such waveguides are known to suffer from propagation loss due to backscattering. A way to overcome the drawback is to use topological photonics, in which robust waveguiding in topologically-protected optical modes has recently been demonstrated. Here, we report single-photon sources using single quantum dots (QDs) embedded in topological slow light waveguides based on valley photonic crystals. We observe Purcell-e…
Silicon carbide (SiC) displays a unique combination of optical and spin-related properties that make it interesting for photonics and quantum technologies. However, guiding light by total internal reflection can be difficult to achieve, especially when SiC is grown as thin films on higher index substrates, like Silicon. Fabricating suspended, subwavelength waveguides requires a single lithography step and offers a solution to the confinement problem, while preserving the design flexibility required for a scalable and complete photonic platform. Here we present a design for such platform, that …
A photonic integrated circuit (PIC) comprised of an 11 cm multimode speckle waveguide, a 1x32 splitter, and a linear grating coupler array is fabricated and utilized to receive 2 GHz of radio-frequency (RF) signal bandwidth from 2.5 to 4.5 GHz using compressive sensing (CS). Incoming RF signals are modulated onto chirped optical pulses which are input to the multimode waveguide. The multimode waveguide produces the random projections needed for CS via optical speckle. The time-varying phase and amplitude of two test RF signals between 2.5 and 4.5 GHz are successfully recovered using the standa…
We review the recent advances reported in the field of integrated photonic waveguide meshes, both from the theoretical as well as from the experimental point of view. We show how these devices can be programmed to implement both traditional signal processing structures, such as finite and infinite impulse response filters, delay lines, beamforming networks as well as more advanced linear matrix optics functionalities. Experimental results reported both in Silicon and Silicon Nitride material platforms will be presented. We will also discuss the main programming algorithms to implement these st…
