Roundabouts in conjunction with other traffic scenarios, e.g., intersections, merging roadways, speed reduction zones, can induce congestion in a transportation network due to driver responses to various disturbances. Research efforts have shown that smoothing traffic flow and eliminating stop-and-go driving can both improve fuel efficiency of the vehicles and the throughput of a roundabout. In this paper, we validate an optimal control framework developed earlier in a multi-lane roundabout scenario using the University of Delaware's scaled smart city (UDSSC). We first provide conditions where the solution is optimal. Then, we demonstrate the feasibility of the solution using experiments at UDSSC, and show that the optimal solution completely eliminates stop-and-go driving while preserving safety.
Autonomy and connectivity are considered among the most promising technologies to improve safety, mobility, fuel and time consumption in transportation systems. Some of the fuel efficiency benefits of connected and automated vehicles (CAVs) can be realized through platooning. A platoon is a virtual train of CAVs that travel together following the platoon head, with small gaps between them. Vehicles may also reduce travel time by lane changing. In this paper, we devise an optimal control-based trajectory planning model that can provide safe and efficient trajectories for the subject vehicle and…
Boston University（波士顿大学）；Honda Research Institute-US (HRI-US)（美国本田研究院（HRI-US））
We derive optimal control policies for a Connected Automated Vehicle (CAV) and cooperating neighboring CAVs to carry out a lane change maneuver consisting of a longitudinal phase where the CAV properly positions itself relative to the cooperating neighbors and a lateral phase where it safely changes lanes. In contrast to prior work on this problem, where the CAV "selfishly" only seeks to minimize its maneuver time, we seek to ensure that the fast-lane traffic flow is minimally disrupted (through a properly defined metric). Additionally, when performing lane-changing maneuvers, we optimally sel…
Connectivity and automation in vehicles provide the most intriguing opportunity for enabling users to better monitor transportation network conditions and make better operating decisions to improve safety and reduce pollution, energy consumption, and travel delays. This paper investigates the implications of optimally coordinating vehicles that are wirelessly connected to each other in roundabouts to achieve a smooth traffic flow. We apply an optimization framework and an analytical solution that allows optimal coordination of vehicles for merging in such traffic scenario. The effectiveness of…
Connected and autonomous vehicles (CAVs) improve the throughput of intersections by crossing in a lane-free order as compared to the signalised crossing of human drivers. However, it is challenging to quantify such an improvement because the available frameworks to analyse the capacity (i.e., the maximum throughput) of the conventional intersections does not apply to the lane-free ones. This paper proposes a novel theoretical framework to numerically simulate and compare the capacity of lane-free and conventional intersections. The results show that the maximum number of vehicles passing throu…
The cooperation of connected and automated vehicles (CAVs) has shown great potential in improving traffic efficiency during intersection management. Existing research mainly focuses on intersections where lane changing is prohibited, which is impractical for real-life implementation. This paper proposes a two-stage cooperation framework, which decouples the longitudinal and lateral control of CAVs, allowing them to change to their preferred lanes. Based on formation control, an iterative framework is initially proposed to solve the target assignment and path planning problem for multiple CAVs …
Connected and automated vehicles (CAVs) offer huge potential to improve the performance of automated vehicles (AVs) without communication capabilities, especially in situations when the vehicles (or agents) need to be cooperative to accomplish their maneuver. Lane change maneuvers in dense traffic, e.g., are very challenging for non-connected AVs. To alleviate this problem, we propose a holistic distributed lane change control scheme for CAVs which relies on vehicle-to-vehicle communication. The originally centralized optimal control problem is embedded into a consensus-based Alternating Direc…
Connected and automated vehicles (CAVs) provide the most intriguing opportunity to optimize energy consumption and travel time. Several approaches have been proposed in the literature that allow CAVs to coordinate in situations where there is a potential conflict, for example, in signalized intersections, merging at roadways and roundabouts, to reduce energy consumption and optimize traffic flow. In this paper, we consider the problem of coordinating CAVs in a corridor consisting of multiple traffic scenarios. We formulate a two-level optimization problem in which we maximize traffic throughpu…
We address the problem of optimally controlling Connected and Automated Vehicles (CAVs) arriving from four multi-lane roads at an intersection where they conflict in terms of safely crossing (including turns) with no collision. The objective is to jointly minimize the travel time and energy consumption of each CAV while ensuring safety. This problem was solved in prior work for single-lane roads. A direct extension to multiple lanes on each road is limited by the computational complexity required to obtain an explicit optimal control solution. Instead, we propose a general framework that first…
In this paper, we establish a decentralized optimal control framework for connected and automated vehicles (CAVs) crossing multiple adjacent, multi-lane signal-free intersections to minimize energy consumption and improve traffic throughput. Our framework consists of two layers of planning. In the upper-level planning, each CAV computes its optimal arrival time at each intersection recursively along with the optimal lane to improve the traffic throughput. In the low-level planning, we formulate an energy-optimal control problem with interior-point constraints, the solution of which yields the …
The paper presents a movement strategy for Connected and Automated Vehicles (CAVs) in a lane-free traffic environment with vehicle nudging by use of an optimal control approach. State-dependent constraints on control inputs are considered to ensure that the vehicle moves within the road boundaries and to prevent collisions. An objective function, comprising various weighted sub-objectives, is designed, whose minimization leads to vehicle advancement at the desired speed, when possible, while avoiding obstacles. A nonlinear optimal control problem (OCP) is formulated for the minimization of the…
This paper analyzes the potential effects of connected and automated vehicles on saturation headway and capacity at signalized intersections. A signalized intersection is created in Vissim as a testbed, where four vehicle types are modeled and tested: (I) human-driven vehicles (HVs), (II) connected vehicles (CVs), (III) automated vehicles (AVs), and (IV) connected automated vehicles (CAVs). Various scenarios are defined based on different market penetration rates of these four vehicle types. AVs are assumed to move more cautiously compared to human drivers. CVs and CAVs are supposed to receive…
This paper studies the cooperative driving of connected and automated vehicles (CAVs) at conflict areas (e.g., non-signalized intersections and ramping regions). Due to safety concerns, most existing studies prohibit lane change since this may cause lateral collisions when coordination is not appropriately performed. However, in many traffic scenarios (e.g., work zones), vehicles must change lanes. To solve this problem, we categorize the potential collision into two kinds and thus establish a bi-level planning problem. The right-of-way of vehicles for the critical conflict zone is considered …
In earlier work, a decentralized optimal control framework was established for coordinating online connected and automated vehicles (CAVs) at urban intersections. The policy designating the sequence that each CAV crosses the intersection, however, was based on a first-in-first-out queue, imposing limitations on the optimal solution. Moreover, no lane changing, or left and right turns were considered. In this paper, we formulate an upper-level optimization problem, the solution of which yields, for each CAV, the optimal sequence and lane to cross the intersection. The effectiveness of the propo…
In earlier work, a decentralized optimal control framework was established for coordinating online connected and automated vehicles (CAVs) in merging roadways, urban intersections, speed reduction zones, and roundabouts. The dynamics of each vehicle were represented by a double integrator and the Hamiltonian analysis was applied to derive an analytical solution that minimizes the L2-norm of the control input. However, the analytical solution did not consider the rear-end collision avoidance constraint. In this paper, we derive a complete, closed-form analytical solution that includes the rear-…
In this paper, we provide a decentralized theoretical framework for coordination of connected and automated vehicles (CAVs) at different traffic scenarios. The framework includes: (1) an upper-level optimization that yields for each CAV its optimal time trajectory and lane to pass through a given traffic scenario while alleviating congestion; and (2) a low-level optimization that yields for each CAV its optimal control input (acceleration/deceleration). We provide a complete, analytical solution of the low-level optimization problem that includes the rear-end, speed-dependent safety constraint…
