To be useful for most scientific and medical applications, compact particle accelerators will require much higher average current than enabled by current architectures. For this purpose, we propose a photonic crystal architecture for a dielectric laser accelerator, referred to as a multi-input multi-output silicon accelerator (MIMOSA), that enables simultaneous acceleration of multiple electron beams, increasing the total electron throughput by at least one order of magnitude. To achieve this, we show that the photonic crystal must support a mode at the $Γ$ point in reciprocal space, with a normalized frequency equal to the normalized speed of the phase matched electron. We show that the figure of merit of the MIMOSA can be inferred from the eigenmodes of the corresponding infinitely periodic structure, which provides a powerful approach to design such devices. Additionally, we extend the MIMOSA architecture to electron deflectors and other electron manipulation functionalities. These additional functionalities, combined with the increased electron throughput of these devices, permit all-optical on-chip manipulation of electron beams in a fully integrated architecture compatible with current fabrication technologies, which opens the way to unconventional electron beam shaping, imaging, and radiation generation.
We propose an on-chip optical power delivery system for dielectric laser accelerators based on a fractal 'tree-branch' dielectric waveguide network. This system replaces experimentally demanding free-space manipulations of the driving laser beam with chip-integrated techniques based on precise nano-fabrication, enabling access to orders of magnitude increases in the interaction length and total energy gain for these miniature accelerators. Based on computational modeling, in the relativistic regime, our laser delivery system is estimated to provide 21 keV of energy gain over an acceleration le…
Dielectric microstructures have generated much interest in recent years as a means of accelerating charged particles when powered by solid state lasers. The acceleration gradient (or particle energy gain per unit length) is an important figure of merit. To design structures with high acceleration gradients, we explore the adjoint variable method, a highly efficient technique used to compute the sensitivity of an objective with respect to a large number of parameters. With this formalism, the sensitivity of the acceleration gradient of a dielectric structure with respect to its entire spatial p…
A dielectric laser accelerator, operating at optical frequencies and GHz pulse rate, is expected to produce attosec electron bunches with a moderate beam current at high energy. For relativistic electrons, the attosec bunch has a spatial length of a few nanometers, which is well suited for generating high-brightness superradiance in the VUV, EUV, and x-ray spectra. Our study shows that the brilliance of coherent undulator radiation driven by a short-bunch beam with 1~10 fC bunch charge from a dielectric laser accelerator is comparable to or higher than that of a synchrotron in the 0.1 ~ 3 keV …
Dielectric laser acceleration (DLA) represents a promising approach to building miniature particle accelerators on a chip. However, similar to conventional RF accelerators, an automatic and reconfigurable control mechanism is needed to scale DLA technology towards high energy gains and practical applications. We present a system providing control of the laser coupling to DLA using integrated optics and introduce a novel component for power distribution using a reconfigurable mesh of Mach-Zehnder interferometers. We show how such a mesh may be sequentially and efficiently tuned to optimize powe…
We present a methodology for designing and measuring pulse front tilt in an ultrafast laser for use in dielectric laser acceleration. Previous research into dielectric laser accelerating modules has focused on measuring high accelerating gradients in novel structures, but has done so only for short electron-laser coupling lengths. Here we demonstrate an optical design to extend the laser-electron interaction to 1mm.
Photonic components based on structured metallic elements show great potential for device applications where field enhancement and confinement of the radiation on a subwavelength scale is required. In this paper we report a detailed study of a prototypical metallo-dielectric photonic structure, where features well known in the world of dielectric photonic crystals, like band gaps and defect modes, are exported to the metallic counterpart, with interesting applications to infrared science and technology, as for instance in quantum well infrared photodetectors, narrow-band spectral filters, and …
In this Letter, we present a study of the confinement properties of point-defect resonators in finite-size photonic-bandgap structures composed of aperiodic arrangements of dielectric rods, with special emphasis on their use for the design of cavities for particle accelerators. Specifically, for representative geometries, we study the properties of the fundamental mode (as a function of the filling fraction, structure size, and losses) via 2-D and 3-D full-wave numerical simulations, as well as microwave measurements at room temperature. Results indicate that, for reduced-size structures, aper…
A new type of curved subwavelength light beam, a photonic hook (PH), emerged from the diffraction of a light wave at a mesoscale dielectric object with broken internal symmetry (Janus particle) was recently reported. For efficient and technically simpler generation of PHs, we propose a new type of asymmetric Janus microparticles, the orthogonal microbars, composed from materials with different refractive indices. Based on the numerical simulations by means of the Finite Elements Method, we investigate the physical mechanism of PH formation by analyzing the field intensity distribution and the …
One of the most appealing aspects of photonic crystal structures is the photonic bandgap created in structures with sufficiently high dielectric contrasts between constituent materials. Understanding how specific photonic crystal structures and their associated stopband positions can selectively interfere with incoming light is vital for implementing these structured dielectrics in a range of optical applications. Metallo-dielectric photonic crystals act to incorporate metal particles into the ordered arrangement of these structures. We examined copper, nickel and gold metal infiltration into …
We present the design and simulation of a three-dimensional photonic crystal waveguide for linear laser-driven acceleration in vacuum. The structure confines a synchronous speed-of-light accelerating mode in both transverse dimensions. We report the properties of this mode, including sustainable gradient and optical-to-beam efficiency. We present a novel method for confining a particle beam using optical fields as focusing elements. This technique, combined with careful structure design, is shown to have a large dynamic aperture and minimal emittance growth, even over millions of optical wavel…
We calculate the static dielectric tensor of a periodic system of aligned anisotropic dielectric cylinders. Exact analytical formulas for the effective dielectric constants for the E- and H- eigenmodes are obtained for arbitrary 2D Bravais lattice and arbitrary cross-section of anisotropic cylinders. It is shown that depending on the symmetry of the unit cell photonic crystal of anisotropic cylinders behaves in the low-frequency limit like uniaxial or biaxial natural crystal. The developed theory of homogenization of anisotropic cylinders is applied for calculations of the dielectric propertie…
In this paper, we propose a novel design of dielectric laser-driven accelerator (DLA) utilizing evanescent electric field of racetrack ring resonator structures. Driven by laser light with the correctly designed optical phase window, sustained acceleration of electrons with controlled deflection is shown. Based on this design, we calculate an acceleration from 30 keV to 148.312 keV in 104.655 μm using a cascaded 11-stage racetrack ring resonators. This new idea poses a solution for on-chip integration of many DLA stages, while maintains high average accelerating gradients, providing a potentia…
Dielectric metasurfaces with spatially varying birefringence and high transmission efficiency can exhibit exceptional abilities for controlling the photonic spin states. We present here some of our works on spin photonics and spin-photonic devices with metasurfaces. We develop a hybrid-order Poincare sphere to describe the evolution of spin states of wave propagation in the metasurface. Both the Berry curvature and the Pancharatnam-Berry phase on the hybrid-order Poincare sphere are demonstrated to be proportional to the variation of total angular momentum. Based on the spin-dependent property…
Photonic topological insulators are a promising photonic platform due to the possibility of unidirectional edge states with insensitivity to bending, fabrication imperfections or environmental fluctuation. Here we demonstrate highly efficient unidirectional photonic edge mode propagation facilitated by an optical analogue of the quantum valley Hall effect. With an all-dielectric kagome lattice design, we demonstrate broadband suppressed reflection in the presence of sharp corners and further show negligible vertical losses in a semiconductor-based device at telecommunication wavelengths.
Compact and low-loss photonic crystal waveguides are critical in integrated terahertz (THz) applications. Compared with pure metal or dielectric photonic crystal waveguides, hybrid (metal-dielectric) integrated waveguides provide a simple way to further improve the field confinement and the propagation loss. In this work, we investigate a hybrid waveguide consisting of metallic photonic crystals and dielectric films in 0.1-1.0 THz. Photonic crystal waveguides based on metal pillar arrays (MPAs) support two resonance modes including the fundamental and high-order transverse magnetic (TM) modes …
When the feature size of photonic structures becomes comparable or even smaller than the wavelength of light, the fabrication imperfections inevitably introduce disorder that may eliminate many functionalities of subwavelength photonic devices. Here we suggest a novel concept to achieve a robust bandgap which can endure disorder beyond 30 as a result of the transition from photonic crystals to Mie-resonant metamaterials. By utilizing Mie-resonant metamaterials with high refractive index, we demonstrate photonic waveguides and cavities with strong robustness to position disorder, thus providing…
We present the experimental observation of the superlensing effect in a slab of a one-dimensional photonic crystal made of tilted dielectric elements. We show that this flat lens can achieve subwavelength resolution in different frequency bands. We also demonstrate that the introduction of a proper corrugation on the lens surface can dramatically improve both the transmission and the resolution of the imaged signal.
We investigate numerically Fano resonances excited in periodic arrays of dielectric, metallic and left-handed cylinders. Of particular interest are Fano resonances excited in the linear array of cylin- ders. We analyze spatial distribution and symmetry of electromagnetic field and discuss the relation between observed Fano resonances and frequency spectra of two-dimensional arrays of cylinders.
A photonic jet commonly denotes the specific spatially localized region in the near-field forward scattering of a light wave at a dielectric micron-sized particle. We present the detailed calculations of the transient response of an airborne silica microsphere illuminated by a femtosecond laser pulse. The spatial area constituting the photonic jet is theoretically investigated and the temporal dynamics of jet dimensions as well as of jet peak intensity is analyzed. The role of morphology-dependent resonances in jet formation is highlighted. The evolution scenario of a nonstationary photonic je…
In the development of high efficiency and high gradient RF-accelerators, RF waveguides and cavities have been designed with Photonic Band Gap (PBG) and fishnet- metamaterial structures. The designed structures are comprised of a periodically corrugated channel sandwiched between two photonic crystal slabs with alternating high to low dielectric constants and a multi-cell cavity-resonator designed with fishnet-metamaterial apertures. The structural designs of our interest are intended to only allow an operating-mode or -band within a narrow frequency range to propagate. The simulation analysis …
We theoretically investigate the dispersion and polarization properties of the electromagnetic waves in a multi-layered structure composed of a magneto-optic waveguide on dielectric substrate covered by one-dimensional dielectric photonic crystal. The numerical analysis of such a complex structure shows polarization filtration of TE- and TM-modes depending on geometrical parameters of the waveguide and photonic crystal. We consider different regimes of the modes propagation inside such a structure: when guiding modes propagate inside the magnetic film and decay in the photonic crystal; when th…
2D dielectric photonic quasicrystals can be designed to show isotropic band gaps. The system here studied is a quasiperiodic lattice made of silicon dielectric cylinders arranged as periodic unit cell based on a decagonal approximant of a quasiperiodic Penrose lattice. We analyze the bulk properties of the resulting lattice as well as the bright states excited in the gap which correspond to localized resonances of the electromagnetic field in specific cylinder clusters of the lattice. Then we introduce a controlled shear deformation which breaks the decagonal symmetry and evaluate the width re…
A photonic jet (terajet at THz frequencies) commonly denotes a specific spatially localized region in the near-field at the front side of a dielectric particle with diameter comparable with wavelength illuminated with a plane wave from its backside (i.e., the jet emerges from the shadow surface of a dielectric particle). In this paper the formation of photonic is demonstrated using the recently proposed 3D dielectric cuboids working in reflection mode when the specific spatially localized region is localized towards the direction of incidence wavefront. The results of simulations based on Fini…
The introduction of topology unravels a new chapter of physics. Topological systems provide unique edge/interfacial quantum states which are expected to contribute to the development of novel spintronics and open the door to robust quantum computation. Optical systems can also benefit from topology. Engineering locally in real space a honeycomb photonic crystal with double Dirac cone in its photonic dispersion, topology transition in photonic band structure is induced and a pseudospin unidirectional optical channel is created and demonstrated by the backscattering immune electromagnetic transp…
We investigate the electromagnetic propagation in two-dimensional photonic crystals, formed by parallel dielectric cylinders embedded a uniform medium. The frequency band structure is computed using the standard plane-wave expansion method, while the propagation and scattering of the electromagnetic waves are calculated by the multiple scattering theory. It is shown that within partial bandgaps, the waves tend to bend away from the forbidden directions. Such a property may render novel applications in manipulating optical flows. In addition, the relevance with the imaging by flat photonic crys…
Saitama University（埼玉大学）；The University of Tokyo（东京大学）
Photonic accelerators have attracted increasing attention in artificial intelligence applications. The multi-armed bandit problem is a fundamental problem of decision making using reinforcement learning. However, the scalability of photonic decision making has not yet been demonstrated in experiments, owing to technical difficulties in physical realization. We propose a parallel photonic decision-making system for solving large-scale multi-armed bandit problems using optical spatiotemporal chaos. We solve a 512-armed bandit problem online, which is much larger than previous experiments by two …
We consider meta materials made from a two-dimensional dielectric rod-type photonic crystal. The magnetic response is studied within the recently developed homogenization theory and we in particular study the effects of topology and inhomogeneous broadening. While topology itself mainly affects the Mie resonance frequency we find that the dispersion in the topological radius R of the dielectric rods may lead to significant inhomogeneous broadening and suppression of the negative-mu phenomena for dR/R0 >> epsilon''/epsilon', with epsilon=epsilon'+i*epsilon'' being the relative dielectric functi…
The possibility of overcoming the critical condition for localized photonic nanojet upon plane optical wave diffraction at mesoscale dielectric particle, which is commonly known as "the refractive index contrast is less than two", was recently reported in our works. To this end, the novel geometrical scheme of photonic nanojet generation in "reflection mode" was proposed based on a super-contrast microparticle (n~2) placed near a flat mirror. In this paper, through the numerical FDTD calculations of optical near-field structure of 2D and 3D dielectric microparticles (cylinder, sphere) we exten…
Laser-driven acceleration holds great promise for significantly improving accelerating gradient. However, scaling the conventional process of structure-based acceleration in vacuum down to optical wavelengths requires a substantially different kind of structure. We require an optical waveguide that (1) is constructed out of dielectric materials, (2) has transverse size on the order of a wavelength, and (3) supports a mode with speed-of-light phase velocity in vacuum. Photonic crystals--structures whose electromagnetic properties are spatially periodic--can meet these requirements. We discuss s…
Ultra-compact, densely integrated optical components manufactured on a CMOS-foundry platform are highly desirable for optical information processing and electronic-photonic co-integration. However, the large spatial extent of evanescent waves arising from nanoscale confinement, ubiquitous in silicon photonic devices, causes significant cross-talk and scattering loss. Here, we demonstrate that anisotropic all-dielectric metamaterials open a new degree of freedom in total internal reflection to shorten the decay length of evanescent waves. We experimentally show the reduction of cross-talk by gr…
Photonic crystals have been demonstrated as a versatile platform for the study of topological phenomena. The recent discovery of higher order topological insulators introduces new aspects of topological photonic crystals which are yet to be explored. Here, we propose a dielectric photonic crystal with unconventional higher order band topology. Besides the conventional spectral features of gapped edge states and in gap corner states, topological band theory predicts that the corner boundary of the higher-order topological insulator hosts a 2/3 fractional charge. We demonstrate that in the photo…
Artificial neural networks are efficient computing platforms inspired by the brain. Such platforms can tackle a vast area of real-life tasks ranging from image processing to language translation. Silicon photonic integrated chips (PICs), by employing coherent interactions in Mach-Zehnder interferometers, are promising accelerators offering record low power consumption and ultra-fast matrix multiplication. Such photonic accelerators, however, suffer from phase uncertainty due to fabrication errors and crosstalk effects that inhibit the development of high-density implementations. In this work, …
In this work, a refractive index (RI) sensor with an effective integration of colorimetric detection and optical sensing capabilities has been developed. Colorimetric detection relies on the sensitivity of the structural color of photonic crystal (PC) substrates to the changes in background RI, while the optical sensing is performed by measuring the magnification abilities of the dielectric microspheres, which depends on the position of the photonic nanojet. Based on this concept, we have successfully assembled 35 μm-diameter barium titanate glass microspheres, 4.9 μm-diameter polystyrene and …
Local laser oxidation of a thin titanium film is considered as a means of a precise adjustment of losses and effective refractive index of dielectric optical waveguides. A fine phase control of an operating point and extinction ratio enhancement up to 57 dB were demonstrated using an integrated optical Ti:LiNbO3 Mach-Zehnder modulator. This technique only slightly affects the dielectric waveguide material and is very promising for a high precision permanent trimming of photonic devices based on dielectric waveguides of different material platforms and fabrication technologies.
A nodal link is a special form of a line degeneracy (a nodal line) between adjacent bands in the momentum space of a three-dimensional topological crystal. Unlike nodal chains or knots, a nodal link consists of two or more mutually-linked rings that do not touch each other. Recent studies on non-Abelian band topology revealed that the topological charges of the nodal links can have the properties of quaternions. However, a photonic crystal that has a nodal link with non-Abelian charges has not been reported. Here, we propose dielectric photonic crystals in forms of double diamond structures wh…
Photonic crystals and metamaterials represent two seemingly different classes of artificial electromagnetic media but often they are composed of similar structural elements arranged in periodic lattices. The important question is how to distinguish these two types of periodic photonic structures when their parameters, such as dielectric permittivity and lattice spacing, vary continuously. Here, we discuss transitions between photonic crystals and all-dielectric metamaterials and introduce the concept of a phase diagram and an order parameter for such structured materials, based on the physics …
In this paper, we have firstly proposed two-dimensional function photonic crystals, which the dielectric constants of medium columns are the functions of space coordinates $\vec{r}$, it is different from the two-dimensional conventional photonic crystals constituting by the medium columns of dielectric constants are constants. We find the band gaps of two-dimensional function photonic crystals are different from the two-dimensional conventional photonic crystals, and when the functions form of dielectric constants are different, the band gaps structure should be changed, which can be designed …
A new approach to producing a composite material with negative refraction index is demonstrated. It is shown that a photonic structure consisting of two dielectric materials, with positive and negative dielectric permittivities, can support electromagnetic surface waves which exhibit the unusual electromagnetic property of left-handedness (or negative refraction index). Depending on the dielectric materials, these surface waves localized at the dielectric interfaces can be either surface plasmons, or phonons. The detailed geometry of the structure determines whether this composite left-handed …
Due to their large electric conductivity, stand-alone metallic films are highly reflective at microwave frequencies. For this reason, it is nearly impossible to observe Faraday rotation in ferromagnetic metal layers, even in films just tens of nanometers thick. Here, we show using numerical simulations that a stack of cobalt nano-layers interlaced between dielectric layers can become highly transmissive and display a large Faraday rotation in a finite frequency band. A 45-degree Faraday rotation can be achieved with metallic ferromagnetic layers as thin as tens of nanometers.
We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar device is easier to fabricate compared with the absorbers with complicated shapes. For a 4-unit cell device, all of the four absorption peaks can be optimized with efficiencies higher than 95%. Moreover, those absorption peaks are insensitive to both polarization and incident angle. The influences of the geometrical parameters along with the refractive index o…
The phenomenon of trapping broad spectrum of light is known as `rainbow trapping' and achieved using all-dielectric, hybrid metallo-dielectric or all-metallic configurations. In the latter cases, unavoidable ohmic losses result in sub-picosecond trapped-mode lifetimes. For all practical purposes, novel strategies are required to be devised for trapping and subsequently, releasing broadband electromagnetic (em) field with lifetime > 1 ps. We present a rainbow trapping configuration using the excitation of multiple optical Tamm (OT) modes in an one-dimensional chirped photonic crystal (PC) desig…
Nonradiating sources of energy have traditionally been studied in quantum mechanics and astrophysics, while receiving a very little attention in the photonics community. This situation has changed recently due to a number of pioneering theoretical studies and remarkable experimental demonstrations of the exotic states of light in dielectric resonant photonic structures and metasurfaces, with the possibility to localize efficiently the electromagnetic fields of high intensities within small volumes of matter. These recent advances underpin novel concepts in nanophotonics, and provide a promisin…
We introduce a new "universality class" of artificial optical media - photonic hyper-crystals. These hyperbolic metamaterials with periodic spatial variation of dielectric permittivity on subwavelength scale, combine the features of optical metamaterials and photonic crystals. In particular, surface waves supported by a hyper-crystal, possess the properties of both the optical Tamm states in photonic crystals and surface plasmon polaritons at the metal-dielectric interface.
The studies of topological phases of matter have been extended from condensed matter physics to photonic systems, resulting in fascinating designs of robust photonic devices. Recently, higher-order topological insulators (HOTIs) have been investigated as a novel topological phase of matter beyond the conventional bulk-boundary correspondence. Previous studies of HOTIs have been mainly focused on the topological multipole systems with negative coupling between lattice sites. Here we experimentally demonstrate that second-order topological insulating phases without negative coupling can be reali…
Nonlinear topological photonics, which explores topics common to the fields of topological phases and nonlinear optics, is expected to open up a new paradigm in topological photonics. Here, we demonstrate second-harmonic generation (SHG) via nonlinear interaction of double topological valley-Hall kink modes in all-dielectric photonic crystals (PhCs). We first show that two topological frequency bandgaps can be created around a pair of frequencies, $ω_0$ and $2ω_0$, by gapping out the corresponding Dirac points in two-dimensional honeycomb PhCs. Valley-Hall kink modes along a kink-type domain w…
We report the first experimental demonstration of a TE-polarization photonic band gap (PBG) in a 2D isotropic hyperuniform disordered solid (HUDS) made of dielectric media with a index contrast of 1.6:1, very low for PBG formation. The solid is composed of a connected network of dielectric walls enclosing air-filled cells. Direct comparison with photonic crystals and quasicrystals permitted us to investigate band-gap properties as a function of increasing rotational isotropy. We present results from numerical simulations proving that the PBG observed experimentally for HUDS at low index contra…
It is shown that small inclusions of a low absorbing metal can have a dramatic effect on the photonic band structure. In the case of diamond and zinc-blende photonic crystals, several complete photonic band gaps (CPBG's) can open in the spectrum, between the 2nd-3rd, 5th-6th, and 8th-9th bands. Unlike in the purely dielectric case, in the presence of small inclusions of a low absorbing metal the largest CPBG for a moderate dielectric constant (epsilon<=10) turns out to be the 2nd-3rd CPBG. The 2nd-3rd CPBG is the most important CPBG, because it is the most stable against disorder. For a diamon…
Most dielectric materials have very weak electro-optic properties, whereas the optical properties of some plasmonic materials may be greatly tuned, especially around their plasma frequency, where dielectric constant is transiting between positive ("dielectric state") and negative ("metallic state") values. In this report, we will review some of our recent work on electro-optical modulation and introduce a new concept, photonic MOS based on "optical property inversion". This concept may provide inspiration for the development of nanophotonic devices. Some of the material was adapted from unfund…
