The rheological properties of viscoelastic materials like polymer melts are greatly affected by factors like salinity, temperature, concentration and pH of the solution. In this study, the memory of the stress affected by each of these factors is shown to be trapped in the order of the fractional derivative of the dynamical equation describing stress and strain in the material. To demonstrate this, the rheological properties of the polymer melt hydrolyzed polyacrylamide HPAM have been modeled using a two element Maxwell model. The model has successfully reproduce existing experimental data on elastic modulus and complex viscosity for these stress factors, besides predicting the development of creep compliance with shear rate. The work also establishes that it is possible to tailor a particular rheological property by suitably tuning a pair of properties, complementary conjugates, that offset each others effects on the rheology. The study shows that HPAM has at least two pairs of complementary conjugates in temperature and pH, and concentration and pH. Further it is shown that the variation of viscosity with shear rate shows a power law behavior for almost all variations in stress parameters. Our modelling using fractional calculus establishes that the fractional order derivative q which is recognized as a memory index to emergent phenomena, shows an inverse relationship with respect to the power law exponent a, the higher the memory index q, the smaller is the power-law exponent a.
We consider concentration dependence of rheological properties of associative telechelic polymer solutions. Experimental results for model telechelic polymer solutions show rather strong concentration dependence of rheological properties. For solutions with relatively high concentrations, linear viscoelasticity deviates from the single Maxwell behavior. The concentration dependence of characteristic relaxation time and moduli is different in high and low concentration cases. These results suggest that there are two different concentration regimes. We expect that densely connected (well percola…
We show that non-entangled polymers display an elastic-like behaviour at a macroscopic scale (probed at some 0.100 mm thickness) up to at least hundred degrees above the glass transition temperature. This observation, found under non-slippage conditions, both for side-chain liquid crystalline polymers and ordinary polymers, is in contradiction with the typically found flow behaviour of polymer melt. Our measurements were carried out with a conventional rheometer at thicknesses of several tenths millimetres. Thus, we were probing bulk properties. The observed elasticity supposedly implies that …
A reasonably accurate representation of a polymer chain is provided by beads connected with rods, or stiff, inextensible springs that mimic a single Kuhn step. Due to high computational cost, coarse-grained bead-spring models are used in typical applications, where each spring is supposed to replace several Kuhn steps. Earlier investigations indicate that the BD simulation predictions of the steady state in different flows, with these different levels of discretization, are largely qualitatively similar. However, subtle quantitative differences exist even for the steady states. In this study, …
Tunability of Dissipative Particle Dynamics simulations for Excluded Volume and Hydrodynamic Interactions in polymer solutions and Rheological predictions
A study of the reinforcement effect of a soft polymer matrix by hard nanometric filler particles is presented. In the main part of this article, the structure of the silica filler in the matrix is studied by Small Angle Neutron Scattering (SANS), and stress-strain isotherms are measured to characterize the rheological properties of the composites. Our analysis allows us to quantify the degree of aggregation of the silica in the matrix, which is studied as a function of pH (4-10), silica volume fraction (3-15%) and silica bead size (average radius 78 A and 96 A). Rheological properties of the s…
In multi-component soft matter, interface properties often play a key role in determining the properties of the overall system. The identification of the internal dynamic structures in non-equilibrium situations requires the interface rheology to be characterized. We have developed a method to quantify the rheological contribution of soft interfaces and evaluate the dynamic modulus of the interface. This method reveals that the dynamic shear responses of interfaces in bilayer systems comprising polypropylene and three different polyethylenes can be classified as having hardening and softening …
X-ray particle tracking velocimetry for steady-state rheological characterization: Case study of a complex polymer melt flow in material extrusion additive manufacturing
University of Stuttgart（斯图加特大学）；University of Milan（米兰大学）；CNR – Consiglio Nazionale delle Ricerche, Istituto di Chimica della Materia Condensata e di Tecnologie per l’Energia（意大利国家研究委员会凝聚态材料与能源技术研究所）
The antagonistic effect of processing and thermal annealing on both the filler structure and the polymer matrix is explored in polymer nanocomposites based on natural rubber with precipitated silica incorporated by coagulation from aqueous suspension followed by roll-milling. Their structure and linear and non-linear rheology have been studied, with a particular emphasis on the effect of high temperature thermal treatment and the number of milling passes. Small-angle X-ray scattering intensities show that the silica is organized in small, unbreakable aggregates containing ca. 50 primary nanopa…
The handleability and sensory perception of hand sanitisers by consumers affect the hygiene outcome. Spillage may result in under-dosing and poor sensory properties can lead to under-utilisation. We first propose four principles (low run off, spreadability, smoothness and non-stickiness) for designing the rheology of thickened alcohol-based hand rubs with acceptable handleability and hand feel. We then evaluate a commercial hand gel and a variety of simplified formulations thickened with microgels (Carbopol 974P, Carbopol Ultrez 20 and Sepimax Zen), or linear polymers (Jaguar HP 120 COS), and …
Chocolate is known to undergo solid-liquid transition upon an increase in temperature as well as under application of deformation field. Upon sudden reduction in temperature from a molten state (or thermal rejuvenation), rheological properties of chocolate undergo evolution as a function of time under isothermal conditions, a behavior reminiscent of physical aging in polymeric glasses. Then again, subsequent to cessation of shear flow (or mechanical rejuvenation), chocolate shows temporal evolution of the rheological properties, a behavior similar to physical aging in soft glassy materials. In…
Mixtures of polymers of varying topologies and stiffnesses display complex emergent rheological properties that often cannot be predicted from their single-component counterparts. For example, entangled blends of ring and linear polymers have been shown to exhibit enhanced shear thinning and viscosity, as well as prolonged relaxation timescales, compared to pure solutions of rings or linear chains. These emergent properties arise in part from the synergistic threading of rings by linear polymers. Topology has also been shown to play an important role in composites of flexible (e.g., DNA) and s…
Fractional calculus has been proved to be very effective in representing the visco-elastic relaxation response of materials with memory such as polymers. Moreover, in modelling the temperature dependency of the material functions in thermo-visco-elasticity, the standard time-temperature superposition principle is known to be ineffective in most of the cases (thermo-rehological complexity). In this work, a novel finite element formulation and numerical implementation is proposed for the simulation of transient thermal analysis in thermo-rehologically complex materials. The parameters of the vis…
The classical rheological theories of entangled polymeric liquids are built upon two pillars: Gaussian statistics of entanglement strands and the assumption that the stress arises exclusively from the change of intramolecular configuration entropy. We show that these two hypotheses are not supported by molecular dynamics simulations of polymer melts. Specifically, the segment distribution functions at the entanglement length scale and below deviate considerably from the theoretical predictions, in both the equilibrium and deformed states. Further conformational analysis reveals that the intrac…
We demonstrated recently that polyelectrolytes with cationic moieties along the chain and a single anionic head are able to form physical hydrogels due to the reversible nature of the head-to-body ionic bond. Here we generate a variety of such polyelectrolytes with various cationic moieties and counterion combinations starting from a common polymeric platform. We show that the rheological properties (shear modulus, critical strain) of the final hydrogels can be modulated over three orders of magnitude depending on the cation/anion pair. Our data fit remarkably well within a scaling model invol…
We propose a single chain slip-spring model, which is based on the slip-spring model by Likhtman [A. E. Likhtman, Macromolecules, 38, 6128 (2005)], for fast rheology simulations of entangled polymers on a GPU. We modify the original slip-spring model slightly for efficient calculations on a GPU. Our model is designed to satisfy the detailed balance condition, which enables us to analyze its static or linear response properties easily. We theoretically analyze several statistical properties of the model, such as the linear response, which will be useful to analyze simulation data. We show that …
Biomimetic hydrogels based on natural polymers are a promising class of biomaterial, mimicking the natural extra-cellular matrix of biological tissues and providing cues for cell attachment, proliferation and differentiation. With a view to providing an upstream method to guide subsequent experimental design, the aim of this study was to introduce a mathematical model that described the rheological properties of a hydrogel system based on covalently crosslinked collagen triple helices. In light of their organization, such gels exhibit limited collagen bundling that cannot be described by exist…
Polymer architecture plays critical roles in both bulk rheological properties and microscale macromolecular dynamics in entangled polymer solutions and composites. Ring polymers, in particular, have been the topic of much debate due to the inability of the celebrated reptation model to capture their observed dynamics. Macrorheology and differential dynamic microscopy (DDM) are powerful methods to determine entangled polymer dynamics across scales, yet they typically require different samples under different conditions, preventing direct coupling of bulk rheological properties to the underlying…
Blends of polymers of different topologies, such as ring and supercoiled, naturally occur in biology and often exhibit emergent viscoelastic properties coveted in industry. However, due to their complexity, along with the difficulty of producing polymers of different topologies, the dynamics of topological polymer blends remains poorly understood. We address this void by using both passive and active microrheology to characterize the linear and nonlinear rheological properties of blends of relaxed circular and supercoiled DNA. We characterize the dynamics as we vary the concentration from belo…
Optical tweezers microrheology (OTM) offers a powerful approach to probe the nonlinear response of complex soft matter systems, such as networks of entangled polymers, over wide-ranging spatiotemporal scales. OTM can also uniquely characterize the microstructural dynamics that lead to the intriguing nonlinear rheological properties that these systems exhibit. However, the strain in OTM measurements, applied by optically forcing a micro-probe through the material, induces network inhomogeneities in and around the strain path, and the resultant flow field complicates the measured response of the…
We consider the simplest representative of the class of multiply branched polymer macromolecules, known as a pom-pom structure. The molecule consists of a backbone linear chain terminated by two branching points with functionalities (numbers of side chains) of $f_1$ and $f_2$, respectively. In a symmetrical case, considered in the present study, one has $f_1=f_2=f$ with the total number of chains $F=2f+1$. Whereas rheological behaviour of melts of pom-pom molecules are intensively studied so far, we turn our attention towards conformational properties of such polymers in a regime of dilute sol…
We study the influence of chain stiffness on droplet flow in a nano-channel, coated with semiflexible hydrophobic polymers by means of non-equilibrium molecular-dynamics simulations. The studied system is then a moving droplet in the slit channel, coexisting with its vapor and subjected to periodic boundary conditions in the flow direction. The polymer chains, grafted by the terminal bead to the confining walls, are described by a coarse-grained model that accounts for chain connectivity, excluded volume interactions and local chain stiffness. The rheological, frictional and dynamical properti…
Orientational origin of nonlinear shear rheology in unentangled polymer melts
Department of Chemical Science and Engineering, Kyoto University（京都大学化学工程系）；Advanced Manufacturing Technology Institute, Kanazawa University（金泽大学先进制造技术研究所）
We study theoretically the formation of shear bands in time-dependent flows of polymeric and wormlike micellar surfactant fluids, focussing on the protocols of step shear stress, step shear strain (or in practice a rapid strain ramp), and shear startup, which are commonly studied experimentally. For each protocol we perform a linear stability analysis to provide a fluid-universal criterion for the onset of shear banding, following our recent Letter [Phys. Rev. Lett. 110 (2013) 086001]. In each case this criterion depends only on the shape of the experimentally measured rheological response fun…
Star polymer undergoes a transformation from a group of loosely coupled chains at low number of arms to a dense hairy colloid at their high number. This change affects solubility, aggregation and rheological behavior and is of much practical interest. We study the range of size and shape properties of the star molecule and of its individual arms upon this transformation. Theoretical calculations are based on a continuous chain model and are performed in the first order in $ε=4-d$. Computer simulations are done by the dissipative particle dynamics and in part by Monte Carlo method and the resul…
We provide a corrected Green's function for a polymer chain trapped in a two-dimensional anisotropic harmonic potential with a fixed boundary condition. This Green's function is a modified version of what Doi and Edwards first derived to describe the polymer chain confined in the tube-like domain of surrounding entangled polymers [J. Chem. Soc. Farad. Trans. II 74 (1978) 1802]. In contradiction to the results found by Ianniruberto and Marrucci (IM) when applying the Doi-Edwards Green function [J. Non-Newtonian Fluid Mech. 79 (1998) 225], we find that the stress-optical rule is violated for any…
We numerically and analytically analyze the startup continuous shear rheology of heavily entangled rigid rod polymer fluids based on our self-consistent, force-level theory of anharmonic tube confinement. The approach is simplified by neglecting stress-assisted transverse barrier hopping, and irreversible relaxation proceeds solely via deformation-perturbed reptation. This process is self-consistently coupled to tube dilation and macroscopic rheological response. We predict that with increasing strain the tube strongly dilates, entanglements are lost, and reptation speeds up. As a consequence,…
Soft materials often exhibit a distinctive power-law viscoelastic response arising from broad distribution of time-scales present in their complex internal structure. A promising tool to accurately describe the rheological behaviour of soft materials is fractional calculus. However, its use in the scientific community remains limited due to the unusual notation and non-trivial properties of fractional operators. This review aims to provide a clear and accessible description of fractional viscoelastic models for a broad audience, and to demonstrate the ability of these models to deliver a unifi…
A study of methodological nature demonstrates the efficiency of a probation test allowing for the intrinsic character of a rheological constitutive law to be assessed. Such a law is considered here for Semi-Crystalline Polymers exhibiting necking and for large deformation. In the framework of a $(\dotσ, σ, \dot\varepsilon, \varepsilon)$ behavior's law, tensile experiments conducted at an imposed constant strain rate $\dot\varepsilon_0$ bring true stress responses from which constitutive (material) parameters can be identified from Model-Based Metrology concepts. The same experiment repeated at…
Cellulose nanocrystals (CNC) are naturally-derived nanostructures of growing importance for the production of composites having attractive mechanical properties, and offer improved sustainability over purely petroleum-based alternatives. Fabrication of CNC composites typically involves extrusion of CNC suspensions and gels in a variety of solvents, in the presence of additives such as polymers and curing agents. However, most studies so far have focused on aqueous CNC gels, yet the behavior of CNC-polymer gels in organic solvents is important to their wider processability. Here, we study the r…
Thermal fluctuations of microtubules (MTs) and other cytoskeletal filaments govern to a great extent the complex rheological properties of the cytoskeleton in eukaryotic cells. In recent years, much effort has been put into capturing the dynamics of these fluctuations by means of analytical and numerical models. These attempts have been very successful for, but also remain limited to, isotropic polymers. To correctly interpret experimental work on (strongly) anisotropic semiflexible polymers, there is a need for a numerical modelling tool that accurately captures the dynamics of polymers with …
Microscale propulsion is integral to numerous biomedical systems, for example biofilm formation and human reproduction, where the surrounding fluids comprise suspensions of polymers. These polymers endow the fluid with non-Newtonian rheological properties, such as shear-thinning and viscoelasticity. Thus, the complex dynamics of non-Newtonian fluids presents numerous modelling challenges, strongly motivating experimental study. Here, we demonstrate that failing to account for "out-of-plane" effects when analysing experimental data of undulatory swimming through a shear-thinning fluid results i…
