arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2001.03075cs.RO
收藏

传感器附着式移动C臂的枢轴校准概念

Pivot calibration concept for sensor attached mobile c-arms

Johns Hopkins University(约翰斯·霍普金斯大学)

Sing Chun Lee, Matthias Seibold, Philipp Fürnstahl, Mazda Farshad, Nassir Navab

AI总结:

针对传感器附着式移动C臂的校准问题,提出无需X射线或3D重建的枢轴校准概念,利用C臂机械运动几何特性计算传感器与旋转中心的固定平移,通过模拟验证鲁棒性,为无辐射校准提供新方法。

摘要:

医疗增强现实已被积极研究数十年,许多方法被提出以革新临床流程。其中一个例子是相机增强型移动C臂(CAMC),它通过将相机刚性安装并校准到成像设备上,在医学图像上提供实时视频增强。此后,通过校准2D/3D相机、跟踪器以及最近将Microsoft HoloLens校准到C臂,提出了几种CAMC变体。不同的校准方法已被应用于建立刚性附着的传感器与成像设备之间的对应关系。这些方法的关键步骤是获取X射线图像或3D重建体积,因此需要发射电离辐射。在这项工作中,我们分析了设备的机械运动,并提出了一种无需发射任何辐射即可将传感器校准到C臂的替代方法。鉴于传感器被刚性附着到设备上,我们引入了扩展的枢轴校准概念,以计算从传感器到C臂旋转中心的固定平移。传感器与旋转中心之间的固定关系可以表述为枢轴点在轨迹上移动的枢轴校准问题。我们的方法利用描述环面的刚性C臂运动来解决此校准问题。我们解释了C臂运动的几何形状及其与附着传感器的关系,提出了一种校准算法,并通过计算机模拟展示了其对噪声、轨迹和观测姿态密度的鲁棒性。我们讨论了这种基于几何的公式及其对不同C臂应用的潜在扩展。

英文摘要:

Medical augmented reality has been actively studied for decades and many methods have been proposed torevolutionize clinical procedures. One example is the camera augmented mobile C-arm (CAMC), which providesa real-time video augmentation onto medical images by rigidly mounting and calibrating a camera to the imagingdevice. Since then, several CAMC variations have been suggested by calibrating 2D/3D cameras, trackers, andmore recently a Microsoft HoloLens to the C-arm. Different calibration methods have been applied to establishthe correspondence between the rigidly attached sensor and the imaging device. A crucial step for these methodsis the acquisition of X-Ray images or 3D reconstruction volumes; therefore, requiring the emission of ionizingradiation. In this work, we analyze the mechanical motion of the device and propose an alternatative methodto calibrate sensors to the C-arm without emitting any radiation. Given a sensor is rigidly attached to thedevice, we introduce an extended pivot calibration concept to compute the fixed translation from the sensor tothe C-arm rotation center. The fixed relationship between the sensor and rotation center can be formulated as apivot calibration problem with the pivot point moving on a locus. Our method exploits the rigid C-arm motiondescribing a Torus surface to solve this calibration problem. We explain the geometry of the C-arm motion andits relation to the attached sensor, propose a calibration algorithm and show its robustness against noise, as wellas trajectory and observed pose density by computer simulations. We discuss this geometric-based formulationand its potential extensions to different C-arm applications.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑