Crosstalk is a major source of noise in Noisy Intermediate-Scale Quantum (NISQ) systems and is a fundamental challenge for hardware design. When multiple instructions are executed in parallel, crosstalk between the instructions can corrupt the quantum state and lead to incorrect program execution. Our goal is to mitigate the application impact of crosstalk noise through software techniques. This requires (i) accurate characterization of hardware crosstalk, and (ii) intelligent instruction scheduling to serialize the affected operations. Since crosstalk characterization is computationally expensive, we develop optimizations which reduce the characterization overhead. On three 20-qubit IBMQ systems, we demonstrate two orders of magnitude reduction in characterization time (compute time on the QC device) compared to all-pairs crosstalk measurements. Informed by these characterization, we develop a scheduler that judiciously serializes high crosstalk instructions balancing the need to mitigate crosstalk and exponential decoherence errors from serialization. On real-system runs on three IBMQ systems, our scheduler improves the error rate of application circuits by up to 5.6x, compared to the IBM instruction scheduler and offers near-optimal crosstalk mitigation in practice.
In a broader picture, the difficulty of mitigating crosstalk has recently driven QC vendors to move towards sparser qubit connectivity or disabling nearby operations entirely in hardware, which can be detrimental to performance. Our work makes the case for software mitigation of crosstalk errors.
Improving gate performance is vital for scalable quantum computing. The universal quantum computing also requires the gate fidelity to reach a high level. For superconducting quantum processor, which operates in the microwave band, the single-qubit gates are usually realized with microwave driving. The crosstalk between microwave pulses is a non-negligible error source. In this article, we propose an error mitigation scheme to address this crosstalk issue for single-qubit gates. There are three steps in our method. First, by controlling the detuning between qubits, the microwave induced classi…
One of the key challenges in current Noisy Intermediate-Scale Quantum (NISQ) computers is to control a quantum system with high-fidelity quantum gates. There are many reasons a quantum gate can go wrong -- for superconducting transmon qubits in particular, one major source of gate error is the unwanted crosstalk between neighboring qubits due to a phenomenon called frequency crowding. We motivate a systematic approach for understanding and mitigating the crosstalk noise when executing near-term quantum programs on superconducting NISQ computers. We present a general software solution to allevi…
Noisy Intermediate-Scale Quantum (NISQ) hardware has unavoidable noises, and crosstalk error is a significant error source. When multiple quantum operations are executed simultaneously, the quantum state can be corrupted due to the crosstalk between gates during simultaneous operations, decreasing the circuit fidelity. In this work, we first report on several protocols for characterizing crosstalk. Then, we discuss different crosstalk mitigation methods from the hardware and software perspectives. Finally, we perform crosstalk injection experiments on the IBM quantum device and demonstrate the…
We introduce Mitiq, a Python package for error mitigation on noisy quantum computers. Error mitigation techniques can reduce the impact of noise on near-term quantum computers with minimal overhead in quantum resources by relying on a mixture of quantum sampling and classical post-processing techniques. Mitiq is an extensible toolkit of different error mitigation methods, including zero-noise extrapolation, probabilistic error cancellation, and Clifford data regression. The library is designed to be compatible with generic backends and interfaces with different quantum software frameworks. We …
Quantum technologies available currently contain noise in general, often dubbed noisy intermediate-scale quantum (NISQ) systems. We here present the verification of noise in measurement readout errors in cloud-based quantum computing services, IBMQ and Rigetti, by directly performing quantum detector tomography, and show that there exist measurement crosstalk errors. We provide the characterization and the quantification of noise in a quantum measurement of multiple qubits. We remark that entanglement is found as a source of crosstalk errors in a measurement of three qubits.
Noisy Intermediate-Scale Quantum (NISQ) devices fail to produce outputs with sufficient fidelity for deep circuits with many gates today. Such devices suffer from read-out, multi-qubit gate and crosstalk noise combined with short decoherence times limiting circuit depth. This work develops a methodology to generate shorter circuits with fewer multi-qubit gates whose unitary transformations approximate the original reference one. It explores the benefit of such generated approximations under NISQ devices. Experimental results with Grover's algorithm, multiple-control Toffoli gates, and the Tran…
In the era of quantum computing without full fault-tolerance, it is essential to suppress noise effects via the quantum error mitigation techniques to enhance the computational power of the quantum devices. One of the most effective noise-agnostic error mitigation schemes is the generalized quantum subspace expansion (GSE) method, which unifies various mitigation algorithms under the framework of the quantum subspace expansion. Specifically, the fault-subspace method, a subclass of GSE method, constructs an error-mitigated quantum state with copies of quantum states with different noise levels…
Achieving near-term quantum advantage will require accurate estimation of quantum observables despite significant hardware noise. For this purpose, we propose a novel, scalable error-mitigation method that applies to gate-based quantum computers. The method generates training data $\{X_i^{\text{noisy}},X_i^{\text{exact}}\}$ via quantum circuits composed largely of Clifford gates, which can be efficiently simulated classically, where $X_i^{\text{noisy}}$ and $X_i^{\text{exact}}$ are noisy and noiseless observables respectively. Fitting a linear ansatz to this data then allows for the prediction…
We use quantum detector tomography to characterize the qubit readout in terms of measurement POVMs on IBM Quantum Computers IBM Q 5 Tenerife and IBM Q 5 Yorktown. Our results suggest that the characterized detector model deviates from the ideal projectors by a few percent. Further improvement on this characterization can be made by adopting two- or more-qubit detector models instead of independent single-qubit detectors for all the qubits in one device. An unexpected behavior was seen in the physical qubit labelled as qubit 3 of IBM Q 5 Tenerife, which can be a consequence of detector crosstal…
Noisy Intermediate-Scale Quantum (NISQ) algorithms, which run on noisy quantum computers should be carefully designed to boost the output state fidelity. While several compilation approaches have been proposed to minimize circuit errors, they often omit the detailed circuit structure information that does not affect the circuit depth or the gate count. In the presence of spatial variation in the error rate of the quantum gates, adjusting the circuit structure can play a major role in mitigating errors. In this paper, we exploit the freedom of gate reordering based on the commutation rules to s…
Noise in existing quantum processors only enables an approximation to ideal quantum computation. However, these approximations can be vastly improved by error mitigation, for the computation of expectation values, as shown by small-scale experimental demonstrations. However, the practical scaling of these methods to larger system sizes remains unknown. Here, we demonstrate the utility of zero-noise extrapolation for relevant quantum circuits using up to 26 qubits, circuit depths of 60, and 1080 CNOT gates. We study the scaling of the method for canonical examples of product states and entangli…
Quantum computing is performed on Noisy Intermediate-Scale Quantum (NISQ) hardware in the short term. Only small circuits can be executed reliably on a quantum machine due to the unavoidable noisy quantum operations on NISQ devices, leading to the under-utilization of hardware resources. With the growing demand to access quantum hardware, how to utilize it more efficiently while maintaining output fidelity is becoming a timely issue. A parallel circuit execution technique has been proposed to address this problem by executing multiple programs on hardware simultaneously. It can improve the har…
We address the exploitation of an optical parametric oscillator (OPO) in the task of mitigating, at least partially, phase noise produced by phase diffusion. In particular, we analyze two scenarios where phase diffusion is typically present. The first one is the measurement of the phase of a noisy optical field, while the second involves a quantum estimation scheme of a phase shift imposed on a noisy probe. In both cases, we prove that an OPO may lead to a partial or full compensation of the noise.
An End-to-End Multi-Stage Kill-Chain Attack on Quantum Neural Networks: Demonstration on Trapped-Ion Hardware
d-fine GmbH（d-fine 有限公司）；Fraunhofer Institute for Applied and Integrated Security (AISEC)（弗劳恩霍夫应用和综合安全研究所）；Alpine Quantum Technologies (AQT) GmbH（阿尔卑斯量子技术 有限公司）；Federal Office for Information Security (BSI)（联邦信息安全局）
Quantum error mitigation is essential for computing on the noisy quantum computer with a limited number of qubits. In this paper, we propose a practical protocol of error mitigation by virtually purifying the quantum state without qubit overhead or requiring only one ancillary qubit. In dual-state purification, we effectively generate a purified state with increased fidelity using the erroneous state and its dual state, respectively, prepared with the noisy quantum circuit and the dual map of its inverse circuit. Combined with tomography purification, we can make sure that the final estimate o…
Readout errors are among the most dominant errors on current noisy intermediate-scale quantum devices. Recently, an efficient and scaleable method for mitigating such errors has been developed, based on classical bit-flip correction. In this talk, we compare the performance of this method for IBM's and Rigetti's quantum devices, demonstrating how the method improves the noisy measurements of observables obtained on the quantum hardware. Moreover, we examine the variance amplification to the data after applying of our mitigation procedure, which is common to all mitigation strategies. We derive…
