微圆顶、微柱阵列与纳米多孔涂层结合的表面结构增强防水性能
Enhancement of Water Repellence by Hierarchical Surface Structures Integrating Micro-dome and Micro-pillar Arrays with Nanoporous Coatings
摘要:
具有多尺度形貌的超疏水表面由于其能够实现的小液体{ \textendash }固体接触分数而提供异常高的表观水接触角和低接触角滞后。荷叶等天然防水表面通常具有圆顶状的微型突起,其缺乏尖锐边缘也有助于液滴顺利脱落而不会被钉扎。然而,工程疏水表面尚未充分利用具有受控曲率的突起的优点。在这项工作中,热回流的光刻胶图案,然后弹性体铸造用于制造阵列的微圆顶的尺寸为20{ \textendash }50 μm。这些微结构涂覆有纳米多孔氧化锌膜并进行氟硅烷化以产生具有静态水接触角高达169.7{ \pm }0.4°和接触角滞后低至14.7{ \pm }1.3°的分级表面形貌。微圆顶阵列的性能显著超过了具有锋利边缘的方形柱和涂覆有相同纳米多孔膜的平坦表面的阵列的性能。最高的性能来自最小的微圆顶(20 μm)和最接近的间距(10 μm)。对于较大的特征,接触角减小和滞后增加{ \textemdash }意外的趋势不能单独用接触分数来解释。这种简单的制造技术可以适用于制造用于液滴脱落的大表面,包括在传热应用中。
英文摘要:
Superhydrophobic surfaces with multi-scale topographies offer exceptionally high apparent water contact angles and low contact angle hysteresis by virtue of the small liquid{\textendash}solid contact fractions they enable. Natural water-repellent surfaces such as lotus leaves often feature dome-shaped micro-scale protrusions, whose lack of sharp edges also facilitates smooth droplet shedding without pinning. Engineered hydrophobic surfaces, however, have not yet fully exploited the merits of protrusions with controlled curvature. In this work, thermal re-flow of photoresist patterns followed by elastomeric casting was used to fabricate arrays of micro-domes with sizes 20{\textendash}50 μm. These microstructures were coated with a nanoporous zinc oxide film and fluorosilanized to produce hierarchical surface topographies with static water contact angles up to 169.7{\pm}0.4° and contact angle hysteresis as low as 14.7{\pm}1.3°. Performance of the micro-dome arrays significantly exceeded that of arrays of sharp-edged square pillars and flat surfaces coated with the same nanoporous film. The highest performance came from the smallest micro-domes (20 μm) and closest spacings (10 μm) investigated. For larger features, contact angles reduced and hysteresis increased {\textemdash} unexpected trends not explained by contact fraction alone. This simple fabrication technique could be adapted to manufacture large surfaces for droplet shedding, including in heat transfer applications.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。