Recent advances in the field of machine learning and computer vision have enabled the development of fast and accurate road detectors. Commonly such systems are trained within a supervised learning paradigm where both an input sensor's data and the corresponding ground truth label must be provided. The task of generating labels is commonly carried out by human annotators and it is notoriously time consuming and expensive. In this work, it is shown that a semi-supervised approach known as co-training can provide significant F1-score average improvements compared to supervised learning. In co-training, two classifiers acting on different views of the data cooperatively improve each other's performance by leveraging unlabeled examples. Depending on the amount of labeled data used, the improvements ranged from 1.12 to 6.10 percentage points for a camera-based road detector and from 1.04 to 8.14 percentage points for a lidar-based road detector. Lastly, the co-training algorithm is validated on the KITTI road benchmark, achieving high performance using only 36 labeled training examples together with several thousands unlabeled ones.
UBTECH Sydney Artificial Intelligence Centre（优必选悉尼人工智能中心）；University of Sydney（悉尼大学）；University of Technology Sydney（悉尼科技大学）；Hangzhou Dianzi University（杭州电子科技大学）
Despite rapid developments in visual image-based road detection, robustly identifying road areas in visual images remains challenging due to issues like illumination changes and blurry images. To this end, LiDAR sensor data can be incorporated to improve the visual image-based road detection, because LiDAR data is less susceptible to visual noises. However, the main difficulty in introducing LiDAR information into visual image-based road detection is that LiDAR data and its extracted features do not share the same space with the visual data and visual features. Such gaps in spaces may limit th…
HeuDiaSyc（HeuDiaSyc实验室）；Université de technologie de Compiègne（贡比涅技术大学）；CNRS（法国国家科学研究中心）；Renault S.A.S（雷诺公司）
LIDAR sensors are usually used to provide autonomous vehicles with 3D representations of their environment. In ideal conditions, geometrical models could detect the road in LIDAR scans, at the cost of a manual tuning of numerical constraints, and a lack of flexibility. We instead propose an evidential pipeline, to accumulate road detection results obtained from neural networks. First, we introduce RoadSeg, a new convolutional architecture that is optimized for road detection in LIDAR scans. RoadSeg is used to classify individual LIDAR points as either belonging to the road, or not. Yet, such p…
RS2AD-LiDAR: End-to-End Autonomous Driving LiDAR Data Generation from Roadside Sensor Observations
State Key Laboratory of Intelligent Green Vehicle and Mobility（智能绿色车辆与移动国家重点实验室）；School of Vehicle and Mobility（车辆与移动学院）；College of Artificial Intelligence（人工智能学院）；Logic & Silicon AI Studio；School of Instrumentation and Optoelectronic Engineering（仪器科学与光电工程学院）
Chalmers University of Technology（查尔姆斯理工大学）；Autoliv Research（奥托立夫研究院）
In this work, a deep learning approach has been developed to carry out road detection using only LIDAR data. Starting from an unstructured point cloud, top-view images encoding several basic statistics such as mean elevation and density are generated. By considering a top-view representation, road detection is reduced to a single-scale problem that can be addressed with a simple and fast fully convolutional neural network (FCN). The FCN is specifically designed for the task of pixel-wise semantic segmentation by combining a large receptive field with high-resolution feature maps. The proposed …
Shanghai Jiao Tong University（上海交通大学）；Shanghai AI Laboratory（上海人工智能实验室）
Sensor-based environmental perception is a crucial part of the autonomous driving system. In order to get an excellent perception of the surrounding environment, an intelligent system would configure multiple LiDARs (3D Light Detection and Ranging) to cover the distant and near space of the car. The precision of perception relies on the quality of sensor calibration. This research aims at developing an accurate, automatic, and robust calibration strategy for multiple LiDAR systems in the general road scene. We thus propose CROON (automatiC multi-LiDAR CalibratiOn and Refinement method in rOad …
Automatic extraction of road curbs from uneven, unorganized, noisy and massive 3D point clouds is a challenging task. Existing methods often project 3D point clouds onto 2D planes to extract curbs. However, the projection causes loss of 3D information which degrades the performance of the detection. This paper presents a robust, accurate and efficient method to extract road curbs from 3D mobile LiDAR point clouds. Our method consists of two steps: 1) extracting the candidate points of curbs based on the proposed novel energy function and 2) refining the candidate points using the proposed leas…
This work aims to address the challenges in autonomous driving by focusing on the 3D perception of the environment using roadside LiDARs. We design a 3D object detection model that can detect traffic participants in roadside LiDARs in real-time. Our model uses an existing 3D detector as a baseline and improves its accuracy. To prove the effectiveness of our proposed modules, we train and evaluate the model on three different vehicle and infrastructure datasets. To show the domain adaptation ability of our detector, we train it on an infrastructure dataset from China and perform transfer learni…
Peking University（北京大学）；China North Vehicle Research Institute（中国北方车辆研究所）
We propose a method for off-road drivable area extraction using 3D LiDAR data with the goal of autonomous driving application. A specific deep learning framework is designed to deal with the ambiguous area, which is one of the main challenges in the off-road environment. To reduce the considerable demand for human-annotated data for network training, we utilize the information from vast quantities of vehicle paths and auto-generated obstacle labels. Using these autogenerated annotations, the proposed network can be trained using weakly supervised or semi-supervised methods, which can achieve b…
LiDARDustX: A LiDAR Dataset for Dusty Unstructured Road Environments
Wuxi Intelligent Control Research Institute,HNU（无锡智能控制研究院，湖南大学）；Hunan University（湖南大学）；Tsinghua University（清华大学）；Xi’an Jiaotong-Liverpool University（西安交通大学利物浦大学）
In this paper, we address semantic segmentation of road-objects from 3D LiDAR point clouds. In particular, we wish to detect and categorize instances of interest, such as cars, pedestrians and cyclists. We formulate this problem as a point- wise classification problem, and propose an end-to-end pipeline called SqueezeSeg based on convolutional neural networks (CNN): the CNN takes a transformed LiDAR point cloud as input and directly outputs a point-wise label map, which is then refined by a conditional random field (CRF) implemented as a recurrent layer. Instance-level labels are then obtained…
A Fully Interpretable Statistical Approach for Roadside LiDAR Background Subtraction
Fundación Vicomtech, Basque Research and Technology Alliance (BRTA)（维克森科技基金会、巴斯克研究与技术联盟）；University of the Basque Country (UPV/EHU)（巴斯克国家大学）；CAFSignalling（CAF信号公司）；IKERBASQUE, Basque Foundation for Science（伊基尔巴斯克基金会）；Donostia International Physics Center (DIPC)（多诺西亚国际物理中心）；Biofisika Institute（生物物理研究所）
In this work, a deep learning approach has been developed to carry out road detection by fusing LIDAR point clouds and camera images. An unstructured and sparse point cloud is first projected onto the camera image plane and then upsampled to obtain a set of dense 2D images encoding spatial information. Several fully convolutional neural networks (FCNs) are then trained to carry out road detection, either by using data from a single sensor, or by using three fusion strategies: early, late, and the newly proposed cross fusion. Whereas in the former two fusion approaches, the integration of multi…
Huazhong University of Science and Technology（华中科技大学）；SenseTime Research（商汤科技研究院）；Chinese University of Hong Kong（香港中文大学）
Camera and 3D LiDAR sensors have become indispensable devices in modern autonomous driving vehicles, where the camera provides the fine-grained texture, color information in 2D space and LiDAR captures more precise and farther-away distance measurements of the surrounding environments. The complementary information from these two sensors makes the two-modality fusion be a desired option. However, two major issues of the fusion between camera and LiDAR hinder its performance, \ie, how to effectively fuse these two modalities and how to precisely align them (suffering from the weak spatiotempora…
Hanyang University（汉阳大学）；Korea Advanced Institute of Science & Technology (KAIST)（韩国科学技术院（KAIST））
Fusing data from cameras and LiDAR sensors is an essential technique to achieve robust 3D object detection. One key challenge in camera-LiDAR fusion involves mitigating the large domain gap between the two sensors in terms of coordinates and data distribution when fusing their features. In this paper, we propose a novel camera-LiDAR fusion architecture called, 3D Dual-Fusion, which is designed to mitigate the gap between the feature representations of camera and LiDAR data. The proposed method fuses the features of the camera-view and 3D voxel-view domain and models their interactions through …
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
In this paper, we present TEScalib, a novel extrinsic self-calibration approach of LiDAR and stereo camera using the geometric and photometric information of surrounding environments without any calibration targets for automated driving vehicles. Since LiDAR and stereo camera are widely used for sensor data fusion on automated driving vehicles, their extrinsic calibration is highly important. However, most of the LiDAR and stereo camera calibration approaches are mainly target-based and therefore time consuming. Even the newly developed targetless approaches in last years are either inaccurate…
Institute for Computer Science and Control (SZTAKI), Eötvös Loránd Research Network (ELKH)（厄特沃什·洛兰研究网络（ELKH）计算机科学与控制研究所（SZTAKI））；Budapest University of Technology and Economics（布达佩斯技术与经济大学）
The frame rates of most 3D LIDAR sensors used in intelligent vehicles are substantially lower than current cameras installed in the same vehicle. This research suggests using a mono camera to virtually enhance the frame rate of LIDARs, allowing the more frequent monitoring of dynamic objects in the surroundings that move quickly. As a first step, dynamic object candidates are identified and tracked in the camera frames. Following that, the LIDAR measurement points of these items are found by clustering in the frustums of 2D bounding boxes. Projecting these to the camera and tracking them to th…
Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
We present a generic evidential grid mapping pipeline designed for imaging sensors such as LiDARs and cameras. Our grid-based evidential model contains semantic estimates for cell occupancy and ground separately. We specify the estimation steps for input data represented by point sets, but mainly focus on input data represented by images such as disparity maps or LiDAR range images. Instead of relying on an external ground segmentation only, we deduce occupancy evidence by analyzing the surface orientation around measurements. We conduct experiments and evaluate the presented method using LiDA…
Light-weight camera localization in existing maps is essential for vision-based navigation. Currently, visual and visual-inertial odometry (VO\&VIO) techniques are well-developed for state estimation but with inevitable accumulated drifts and pose jumps upon loop closure. To overcome these problems, we propose an efficient monocular camera localization method in prior LiDAR maps using direct 2D-3D line correspondences. To handle the appearance differences and modality gaps between LiDAR point clouds and images, geometric 3D lines are extracted offline from LiDAR maps while robust 2D lines are …
Integrating LiDAR and Camera information into Bird's-Eye-View (BEV) has become an essential topic for 3D object detection in autonomous driving. Existing methods mostly adopt an independent dual-branch framework to generate LiDAR and camera BEV, then perform an adaptive modality fusion. Since point clouds provide more accurate localization and geometry information, they could serve as a reliable spatial prior to acquiring relevant semantic information from the images. Therefore, we design a LiDAR-Guided View Transformer (LGVT) to effectively obtain the camera representation in BEV space and th…
University of Kentucky（肯塔基大学）；Simon Fraser University（西蒙弗雷泽大学）；DZYNE Technologies（DZYNE科技公司）
Roadway free-flow speed captures the typical vehicle speed in low traffic conditions. Modeling free-flow speed is an important problem in transportation engineering with applications to a variety of design, operation, planning, and policy decisions of highway systems. Unfortunately, collecting large-scale historical traffic speed data is expensive and time consuming. Traditional approaches for estimating free-flow speed use geometric properties of the underlying road segment, such as grade, curvature, lane width, lateral clearance and access point density, but for many roads such features are …
Chengdu University of Information Technology（成都信息工程大学）；Nanjing University of Science and Technology（南京理工大学）
Robust road segmentation is a key challenge in self-driving research. Though many image-based methods have been studied and high performances in dataset evaluations have been reported, developing robust and reliable road segmentation is still a major challenge. Data fusion across different sensors to improve the performance of road segmentation is widely considered an important and irreplaceable solution. In this paper, we propose a novel structure to fuse image and LiDAR point cloud in an end-to-end semantic segmentation network, in which the fusion is performed at decoder stage instead of at…
This work proposes a novel motion guided method for target-less self-calibration of a LiDAR and camera and use the re-projection of LiDAR points onto the image reference frame for real-time depth upsampling. The calibration parameters are estimated by optimizing an objective function that penalizes distances between 2D and re-projected 3D motion vectors obtained from time-synchronized image and point cloud sequences. For upsampling, a simple, yet effective and time efficient formulation that minimizes depth gradients subject to an equality constraint involving the LiDAR measurements is propose…
The University of Adelaide（阿德莱德大学）；Northwestern Polytechnical University（西北工业大学）；Intellifusion（云天励飞）
Road detection is a critically important task for self-driving cars. By employing LiDAR data, recent works have significantly improved the accuracy of road detection. Relying on LiDAR sensors limits the wide application of those methods when only cameras are available. In this paper, we propose a novel road detection approach with RGB being the only input during inference. Specifically, we exploit pseudo-LiDAR using depth estimation, and propose a feature fusion network where RGB and learned depth information are fused for improved road detection. To further optimize the network structure and …
Multi-LVI-SAM: A Robust LiDAR-Visual-Inertial Odometry for Multiple Fisheye Cameras
Department of Computer Science and Technology, School of Electronics and Information Engineering, Tongji University（电子信息工程学院计算机科学与技术系）；MOE Key Lab of Embedded System and Service Computing, Tongji University（教育部嵌入式系统与服务计算重点实验室）；Institute of Intelligent Vehicles, Tongji University（智能车辆研究院）
Texas A&M University（德克萨斯A&M大学）；DEVCOM Army Research Laboratory (ARL)（DEVCOM陆军研究实验室）
We propose an algorithm for automatic, targetless, extrinsic calibration of a LiDAR and camera system using semantic information. We achieve this goal by maximizing mutual information (MI) of semantic information between sensors, leveraging a neural network to estimate semantic mutual information, and matrix exponential for calibration computation. Using kernel-based sampling to sample data from camera measurement based on LiDAR projected points, we formulate the problem as a novel differentiable objective function which supports the use of gradient-based optimization methods. We also introduc…
The Institute of Industrial Science, The University of Tokyo（东京大学生产技术研究所）；The National Institute of Advanced Industrial Science and Technology (AIST)（日本产业技术综合研究所）
Wangxuan Institute of Computer Technology, Peking University（北京大学王选计算机研究所）；DAMO Academy, Alibaba Group（阿里巴巴集团达摩院）；Shenzhen Campus of Sun Yat-sen University（中山大学深圳校区）
Fusing the camera and LiDAR information has become a de-facto standard for 3D object detection tasks. Current methods rely on point clouds from the LiDAR sensor as queries to leverage the feature from the image space. However, people discovered that this underlying assumption makes the current fusion framework infeasible to produce any prediction when there is a LiDAR malfunction, regardless of minor or major. This fundamentally limits the deployment capability to realistic autonomous driving scenarios. In contrast, we propose a surprisingly simple yet novel fusion framework, dubbed BEVFusion,…
This paper presents a novel indoor layout estimation system based on the fusion of 2D LiDAR and intensity camera data. A ground robot explores an indoor space with a single floor and vertical walls, and collects a sequence of intensity images and 2D LiDAR datasets. The LiDAR provides accurate depth information, while the camera captures high-resolution data for semantic interpretation. The alignment of sensor outputs and image segmentation are computed jointly by aligning LiDAR points, as samples of the room contour, to ground-wall boundaries in the images. The alignment problem is decoupled i…
In this paper, we propose a novel online self-calibration approach for Light Detection and Ranging (LiDAR) and camera sensors. Compared to the previous CNN-based methods that concatenate the feature maps of the RGB image and decalibrated depth image, we exploit the cost volume inspired by the PWC-Net for feature matching. Besides the smooth L1-Loss of the predicted extrinsic calibration parameters, an additional point cloud loss is applied. Instead of regress the extrinsic parameters between LiDAR and camera directly, we predict the decalibrated deviation from initial calibration to the ground…
