Traditional robots have rigid links and structures that limit their ability to interact with the dynamics of their immediate environment. For example, conventional robot manipulators with rigid links can only manipulate objects using specific end effectors. These robots often encounter difficulties operating in unstructured and highly congested environments. A variety of biological organisms exhibit complex movement with soft structures devoid of rigid components. Inspired by biology, researchers have been able to design and build soft robots. With a soft structure and redundant degrees of freedom, these robots can be used for delicate tasks in unstructured environments. This review discusses the motivation for soft robots, their design processes as well as their applications and limitations. Soft robots have the ability to operate in unstructured environment due to their inherent potential to exploit morphological computation to adapt to, and interact with, the world in a way that is difficult with rigid systems. Soft robots could be used for operations, ranging from search and rescue operations in a natural disaster relief effort, and of emerging interest is in the field of medical care as seen in personal robots.
Soft robots are promising for manipulation tasks thanks to their compliance, safety, and high degree of freedom. However, the commonly used bidirectional continuum segment design means soft robotic manipulators only function in a limited hemispherical workspace. This work increases a soft robotic arm's workspace by designing, fabricating, and controlling an additional soft prismatic actuator at the base of the soft arm. This actuator consists of pneumatic artificial muscles and a piston, making the actuator back-driveable. We increase the task space volume by 116\%, and we are now able to perf…
Harbin Engineering University（哈尔滨工程大学）；College of Mechanical and Electrical Engineering, Harbin Engineering University（哈尔滨工程大学机电工程学院）
A new fluid-driven soft robot hand in this study uses the idea of the bionics and has the anthropomorphic form, which is oriented to the flexible grasp function. The soft robot hand is composed of a new kind of multi-freedom soft finger and soft palm, which realizes the characteristic grasping function of forehand and backhand. Combined with the fine fluid control system, the soft hand can realize flexible grasping under high pressure, so as to realize flexible grasping operation for different types of target objects in the underwater environment. The soft robot hand was controlled based on wa…
Human Emotion-Mediated Soft Robotic Arts: Exploring the Intersection of Human Emotions, Soft Robotics and Arts
School of Engineering and Materials Science in Queen Mary University of London（伦敦女王学院工程与材料科学学院）；Department of Engineering, University of Cambridge（剑桥大学工程系）
Soft robots are inherently compliant and have a strong potential to realize human-friendly and safe robots. Despite continued research highlighting the potential of soft robots, they remain largely confined to laboratory settings. In this work, inspired by spider monkeys' tails, we propose a hybrid soft robot (HSR) design. We detail the design objectives and methodology to improve the controllable stiffness range and achieve independent stiffness and shape control. We extend the curve parametric approach to We experimentally demonstrate that the proposed HSR has about a 100% stiffness range in…
Soft robots are typically approximated as low-dimensional systems, especially when learning-based methods are used. This leads to models that are limited in their capability to predict the large number of deformation modes and interactions that a soft robot can have. In this work, we present a deep-learning methodology to learn high-dimensional visual models of a soft robot combining multimodal sensorimotor information. The models are learned in an end-to-end fashion, thereby requiring no intermediate sensor processing or grounding of data. The capabilities and advantages of such a modelling a…
In this paper, we study integrated estimation and control of soft robots. A significant challenge in deploying closed loop controllers is reliable proprioception via integrated sensing in soft robots. Despite the considerable advances accomplished in fabrication, modelling, and model-based control of soft robots, integrated sensing and estimation is still in its infancy. To that end, this paper introduces a new method of estimating the degree of curvature of a soft robot using a stretchable sensing skin. The skin is a spray-coated piezoresistive sensing layer on a latex membrane. The mapping f…
The University of Manchester（曼彻斯特大学）；Delft University of Technology（代尔夫特理工大学）
Soft robots can safely interact with environments because of their mechanical compliance. Self-collision is also employed in the modern design of soft robots to enhance their performance during different tasks. However, developing an efficient and reliable simulator that can handle the collision response well, is still a challenging task in the research of soft robotics. This paper presents a collision-aware simulator based on geometric optimization, in which we develop a highly efficient and realistic collision checking / response model incorporating a hyperelastic material property. Both act…
Nagahama Institute of Bio-Science and Technology（长滨生物科学与技术学院）；Network System Research Institute, National Institute of Information and Communications Technology（国立信息与通信技术研究所网络系统研究部）；Graduate School of Informatics, Nagoya University（名古屋大学信息学研究科）；Interdisciplinary Graduate School, University of Yamanashi（山梨大学跨学科研究科）
Delft University of Technology（代尔夫特理工大学）；Istituto Italiano di Tecnologia (IIT)（意大利技术研究院）
We present OpenFish: an open source soft robotic fish which is optimized for speed and efficiency. The soft robotic fish uses a combination of an active and passive tail segment to accurately mimic the thunniform swimming mode. Through the implementation of a novel propulsion system that is capable of achieving higher oscillation frequencies with a more sinusoidal waveform, the open source soft robotic fish achieves a top speed of $0.85~\mathrm{m/s}$. Hereby, it outperforms the previously reported fastest soft robotic fish by $27\%$. Besides the propulsion system, the optimization of the fish …
Due to their ability to move without sliding relative to their environment, soft growing robots are attractive for deploying distributed sensor networks in confined spaces. Sensing of the state of such robots would also add to their capabilities as human-safe, adaptable manipulators. However, incorporation of distributed sensors onto soft growing robots is challenging because it requires an interface between stiff and soft materials, and the sensor network needs to undergo significant strain. In this work, we present a method for adding sensors to soft growing robots that uses flexible printed…
Purpose of review: We review recent advances in algorithmic development and validation for modeling and control of soft robots leveraging the Koopman operator theory. Recent findings: We identify the following trends in recent research efforts in this area. (1) The design of lifting functions used in the data-driven approximation of the Koopman operator is critical for soft robots. (2) Robustness considerations are emphasized. Works are proposed to reduce the effect of uncertainty and noise during the process of modeling and control. (3) The Koopman operator has been embedded into different mo…
Georgia Tech Institute for Robotics and Intelligent Machines（佐治亚理工学院机器人与智能机器研究所）；Texas A&M University（德州农工大学）
In this paper, a reinforced soft robot prototype with a custom-designed actuator-space string encoder are created to investigate dynamic soft robotic trajectory tracking. The soft robot prototype embedded with the proposed adaptive passivity control and efficient dynamic model make the challenging trajectory tracking tasks possible. We focus on the exploration of tracking accuracy as well as the full potential of the proposed control strategy by performing experimental validations at different operation scenarios: various tracking speed and external disturbance. In all experimental scenarios, …
Compared to traditional rigid robotics, soft robotics has attracted increasing attention due to its advantages as compliance, safety, and low cost. As an essential part of soft robotics, the soft robotic gripper also shows its superior while grasping the objects with irregular shapes. Recent research has been conducted to improve its grasping performance by adjusting the variable effective length (VEL). However, the VEL achieved by multi-chamber design or tunable stiffness shape memory material requires complex pneumatic circuit design or a time-consuming phase-changing process. This work prop…
The compliance of soft robotic arms renders the development of accurate kinematic & dynamical models especially challenging. The most widely used model in soft robotic kinematics assumes Piecewise Constant Curvature (PCC). However, PCC fails to effectively handle external forces, or even the influence of gravity, since the robot does not deform with a constant curvature under these conditions. In this paper, we establish three-dimensional (3D) modeling of a multi-segment soft robotic arm under the less restrictive assumption that each segment of the arm is deformed on a plane without twisting.…
Soft robotic hands and grippers are increasingly attracting attention as a robotic end-effector. Compared with rigid counterparts, they are safer for human-robot and environment-robot interactions, easier to control, lower cost and weight, and more compliant. Current soft robotic hands have mostly focused on the soft fingers and bending actuators. However, the palm is also essential part for grasping. In this work, we propose a novel design of soft humanoid hand with pneumatic soft fingers and soft palm. The hand is inexpensive to fabricate. The configuration of the soft palm is based on modul…
The design and fabrication of soft robot hands is still a time-consuming and difficult process. Advances in rapid prototyping have accelerated the fabrication process significantly while introducing new complexities into the design process. In this work, we present an approach that utilizes novel low-cost fabrication techniques in conjunction with design tools helping soft hand designers to systematically take advantage of multi-material 3D printing to create dexterous soft robotic hands. While very low cost and lightweight, we show that generated designs are highly durable, surprisingly stron…
Soft robots are capable of inherently safer interactions with their environment than rigid robots since they can mechanically deform in response to unanticipated stimuli. However, their complex mechanics can make planning and control difficult, particularly with tasks such as locomotion. In this work, we present a mobile and untethered underwater crawling soft robot, PATRICK, paired with a testbed that demonstrates closed-loop locomotion planning. PATRICK is inspired by the brittle star, with five flexible legs actuated by a total of 20 shape-memory alloy (SMA) wires, providing a rich variety …
Delft University of Technology（代尔夫特理工大学）；The Chinese University of Hong Kong（香港中文大学）；The University of Manchester（曼彻斯特大学）
Real-time proprioception is a challenging problem for soft robots, which have almost infinite degrees-of-freedom in body deformation. When multiple actuators are used, it becomes more difficult as deformation can also occur on actuators caused by interaction between each other. To tackle this problem, we present a method in this paper to sense and reconstruct 3D deformation on pneumatic soft robots by first integrating multiple low-cost sensors inside the chambers of pneumatic actuators and then using machine learning to convert the captured signals into shape parameters of soft robots. An ext…
The Piecewise Constant Curvature (PCC) model is the most widely used soft robotic modeling and control. However, the PCC fails to accurately describe the deformation of the soft robots when executing dynamic tasks or interacting with the environment. This paper presents a simple threedimensional (3D) modeling method for a multi-segment soft robotic manipulator with non-constant curvature deformation. We devise kinematic and dynamical models for soft manipulators by modeling each segment of the manipulator as two stretchable links connected by a universal joint. Based on that, we present two co…
Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology（华中科技大学武汉国家强磁场中心）；State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology（华中科技大学强电磁工程与新技术国家重点实验室）
Magnetic soft robots have attracted growing interest due to their unique advantages in terms of untethered actuation and excellent controllability. However, finding the required magnetization patterns or magnetic fields to achieve the desired functions of these robots is quite challenging in many cases. No unified framework for design has been proposed yet, and existing methods mainly rely on manual heuristics, which are hard to satisfy the high complexity level of the desired robotic motion. Here, we develop an intelligent method to solve the related inverse-design problems, implemented by in…
Developing Simulation Models for Soft Robotic Grippers in Webots
Faculty of Science and Engineering, University of Groningen（格罗宁根大学科学与工程学院）；School of Electrical Engineering and Informatics, Bandung Institute of Technology（班达理工大学电气工程与信息学院）
With soft robotics being increasingly employed in settings demanding high and controlled contact forces, recent research has demonstrated the use of soft robots to estimate or intrinsically sense forces without requiring external sensing mechanisms. Whilst this has mainly been shown in tendon-based continuum manipulators or deformable robots comprising of push-pull rod actuation, fluid drives still pose great challenges due to high actuation variability and nonlinear mechanical system responses. In this work we investigate the capabilities of a hydraulic, parallel soft robot to intrinsically s…
Linking Exteroception and Proprioception through Improved Contact Modeling for Soft Growing Robots
School of Mechanical Engineering, Purdue University, West Lafayette, IN, USA（帕克大学机械工程学院）；Department of Computer Science, Purdue University, West Lafayette, IN, USA（帕克大学计算机科学系）
Stanford University（斯坦福大学）；Kadir Has University（卡迪尔哈斯大学）；University of Notre Dame（圣母大学）
Soft robot serial chain manipulators with the capability for growth, stiffness control, and discrete joints have the potential to approach the dexterity of traditional robot arms, while improving safety, lowering cost, and providing an increased workspace, with potential application in home environments. This paper presents an approach for design optimization of such robots to reach specified targets while minimizing the number of discrete joints and thus construction and actuation costs. We define a maximum number of allowable joints, as well as hardware constraints imposed by the materials a…
University of California, Santa Barbara（加州大学圣巴巴拉分校）；ETH Zurich（苏黎世联邦理工学院）
Soft robotics is attractive for wearable applications that require conformal interactions with the human body. Soft wearable robotic garments hold promise for supplying dynamic compression or massage therapies, such as are applied for disorders affecting lymphatic and blood circulation. In this paper, we present a wearable robot capable of supplying dynamic compression and massage therapy via peristaltic motion of finger-sized soft, fluidic actuators. We show that this peristaltic wearable robot can supply dynamic compression pressures exceeding 22 kPa at frequencies of 14 Hz or more, meeting …
