In this paper, we focus on motion estimation dedicated for non-holonomic ground robots, by probabilistically fusing measurements from the wheel odometer and exteroceptive sensors. For ground robots, the wheel odometer is widely used in pose estimation tasks, especially in applications under planar-scene based environments. However, since the wheel odometer only provides 2D motion estimates, it is extremely challenging to use that for performing accurate full 6D pose (3D position and 3D orientation) estimation. Traditional methods on 6D pose estimation either approximate sensor or motion models, at the cost of accuracy reduction, or rely on other sensors, e.g., inertial measurement unit (IMU), to provide complementary measurements. By contrast, in this paper, we propose a novel method to utilize the wheel odometer for 6D pose estimation, by modeling and utilizing motion manifold for ground robots. Our approach is probabilistically formulated and only requires the wheel odometer and an exteroceptive sensor (e.g., a camera). Specifically, our method i) formulates the motion manifold of ground robots by parametric representation, ii) performs manifold based 6D integration with the wheel odometer measurements only, and iii) re-parameterizes manifold equations periodically for error reduction. To demonstrate the effectiveness and applicability of the proposed algorithmic modules, we integrate that into a sliding-window pose estimator by using measurements from the wheel odometer and a monocular camera. By conducting extensive simulated and real-world experiments, we show that the proposed algorithm outperforms competing state-of-the-art algorithms by a significant margin in pose estimation accuracy, especially when deployed in complex large-scale real-world environments.
Vision-based robotic assembly is a crucial yet challenging task as the interaction with multiple objects requires high levels of precision. In this paper, we propose an integrated 6D robotic system to perceive, grasp, manipulate and assemble blocks with tight tolerances. Aiming to provide an off-the-shelf RGB-only solution, our system is built upon a monocular 6D object pose estimation network trained solely with synthetic images leveraging physically-based rendering. Subsequently, pose-guided 6D transformation along with collision-free assembly is proposed to construct any designed structure …
6D pose recognition has been a crucial factor in the success of robotic grasping, and recent deep learning based approaches have achieved remarkable results on benchmarks. However, their generalization capabilities in real-world applications remain unclear. To overcome this gap, we introduce 6IMPOSE, a novel framework for sim-to-real data generation and 6D pose estimation. 6IMPOSE consists of four modules: First, a data generation pipeline that employs the 3D software suite Blender to create synthetic RGBD image datasets with 6D pose annotations. Second, an annotated RGBD dataset of five house…
Foundation Feature-Driven Online End-Effector Pose Estimation: A Marker-Free and Learning-Free Approach
Peking University（北京大学）；Center on Frontiers of Computing Studies, School of Computer Science, Peking University（北京大学计算机科学学院计算前沿研究中心）；PKU-Agibot Lab（北大-星猿哲实验室）；National Key Laboratory for Multimedia Information Processing, School of Computer Science, Peking University（北京大学计算机科学学院多媒体信息处理国家重点实验室）
GISR: Geometric Initialization and Silhouette-based Refinement for Single-View Robot Pose and Configuration Estimation
University of Zagreb Faculty of Electrical Engineering and Computing（萨格勒布大学电气工程与计算机学院）；University of Toronto Institute for Aerospace Studies（多伦多大学航空航天研究所）
Vision based object grasping and manipulation in robotics require accurate estimation of object's 6D pose. The 6D pose estimation has received significant attention in computer vision community and multiple datasets and evaluation metrics have been proposed. However, the existing metrics measure how well two geometrical surfaces are aligned - ground truth vs. estimated pose - which does not directly measure how well a robot can perform the task with the given estimate. In this work we propose a probabilistic metric that directly measures success in robotic tasks. The evaluation metric is based…
Fraunhofer Institute for Manufacturing Engineering and Automation IPA（弗劳恩霍夫制造工程与自动化研究所IPA）；Institute of Industrial Manufacturing and Management IFF, University of Stuttgart（斯图加特大学工业制造与管理研究所IFF）
Single shot approaches have demonstrated tremendous success on various computer vision tasks. Finding good parameterizations for 6D object pose estimation remains an open challenge. In this work, we propose different novel parameterizations for the output of the neural network for single shot 6D object pose estimation. Our learning-based approach achieves state-of-the-art performance on two public benchmark datasets. Furthermore, we demonstrate that the pose estimates can be used for real-world robotic grasping tasks without additional ICP refinement.
Sharif University of Technology（谢里夫理工大学）；Grenoble Institute of Technology (INPG)（格勒诺布尔理工学院）
Offline procedures for estimating parameters of robot dynamics are practically based on the parameterized inverse dynamic model. In this paper, we present a novel approach to parameter estimation of robot dynamics which removes the necessity of parameterization (i.e. finding the minimum number of parameters from which the dynamics can be calculated through a linear model with respect to these parameters). This offline approach is based on a simple and powerful swarm intelligence tool: the particle swarm optimization (PSO). In this paper, we discuss and validate the method through simulated exp…
University of Toronto Institute for Aerospace Studies（多伦多大学航空航天研究所）；McGill University（麦吉尔大学）
Robotics and computer vision problems commonly require handling rigid-body motions comprising translation and rotation - together referred to as pose. In some situations, a vectorial parameterization of pose can be useful, where elements of a vector space are surjectively mapped to a matrix Lie group. For example, these vectorial representations can be employed for optimization as well as uncertainty representation on groups. The most common mapping is the matrix exponential, which maps elements of a Lie algebra onto the associated Lie group. However, this choice is not unique. It has been pre…
An arbitrary rigid transformation in $\mathbf{SE}(3)$ can be separated into two parts, namely, a translation and a rigid rotation. This technical report reviews, under a unifying viewpoint, three common alternatives to representing the rotation part: sets of three (yaw-pitch-roll) Euler angles, orthogonal rotation matrices from $\mathbf{SO}(3)$ and quaternions. It will be described: (i) the equivalence between these representations and the formulas for transforming one to each other (in all cases considering the translational and rotational parts as a whole), (ii) how to compose poses with pos…
Plan execution on real robots in realistic environments is underdetermined and often leads to failures. The choice of action parameterization is crucial for task success. By thinking ahead of time with the fast plan projection mechanism proposed in this paper, a general plan can be specialized towards the environment and task at hand by choosing action parameterizations that are predicted to lead to successful execution. For finding causal relationships between action parameterizations and task success, we provide the robot with means for plan introspection and propose a systematic and hierarc…
Carnegie Mellon University（卡内基梅隆大学）；University of California, Berkeley（加州大学伯克利分校）
Human motion prediction is non-trivial in modern industrial settings. Accurate prediction of human motion can not only improve efficiency in human robot collaboration, but also enhance human safety in close proximity to robots. Among existing prediction models, the parameterization and identification methods of those models vary. It remains unclear what is the necessary parameterization of a prediction model, whether online adaptation of the model is necessary, and whether prediction can help improve safety and efficiency during human robot collaboration. These problems result from the difficu…
We present an approach for estimating a mobile robot's pose w.r.t. the allocentric coordinates of a network of static cameras using multi-view RGB images. The images are processed online, locally on smart edge sensors by deep neural networks to detect the robot and estimate 2D keypoints defined at distinctive positions of the 3D robot model. Robot keypoint detections are synchronized and fused on a central backend, where the robot's pose is estimated via multi-view minimization of reprojection errors. Through the pose estimation from external cameras, the robot's localization can be initialize…
In recent times, object detection and pose estimation have gained significant attention in the context of robotic vision applications. Both the identification of objects of interest as well as the estimation of their pose remain important capabilities in order for robots to provide effective assistance for numerous robotic applications ranging from household tasks to industrial manipulation. This problem is particularly challenging because of the heterogeneity of objects having different and potentially complex shapes, and the difficulties arising due to background clutter and partial occlusio…
University of California San Diego（加州大学圣地亚哥分校）；LIRMM（蒙彼利埃计算机科学、机器人学与微电子实验室）；Univ Montpellier（蒙彼利埃大学）；CNRS（法国国家科学研究中心）
State estimation from measured data is crucial for robotic applications as autonomous systems rely on sensors to capture the motion and localize in the 3D world. Among sensors that are designed for measuring a robot's pose, or for soft robots, their shape, vision sensors are favorable because they are information-rich, easy to set up, and cost-effective. With recent advancements in computer vision, deep learning-based methods no longer require markers for identifying feature points on the robot. However, learning-based methods are data-hungry and hence not suitable for soft and prototyping rob…
Pose estimation commonly refers to computer vision methods that recognize people's body postures in images or videos. With recent advancements in deep learning, we now have compelling models to tackle the problem in real-time. Since these models are usually designed for human images, one needs to adapt existing models to work on other creatures, including robots. This paper examines different state-of-the-art pose estimation models and proposes a lightweight model that can work in real-time on humanoid robots in the RoboCup Humanoid League environment. Additionally, we present a novel dataset …
Pose estimation is an important technique for nonverbal human-robot interaction. That said, the presence of a camera in a person's space raises privacy concerns and could lead to distrust of the robot. In this paper, we propose a privacy-preserving camera-based pose estimation method. The proposed system consists of a user-controlled translucent filter that covers the camera and an image enhancement module designed to facilitate pose estimation from the filtered (shadow) images, while never capturing clear images of the user. We evaluate the system's performance on a new filtered image dataset…
We introduce RoboPose, a method to estimate the joint angles and the 6D camera-to-robot pose of a known articulated robot from a single RGB image. This is an important problem to grant mobile and itinerant autonomous systems the ability to interact with other robots using only visual information in non-instrumented environments, especially in the context of collaborative robotics. It is also challenging because robots have many degrees of freedom and an infinite space of possible configurations that often result in self-occlusions and depth ambiguities when imaged by a single camera. The contr…
We propose an approach to estimate 3D human pose in real world units from a single RGBD image and show that it exceeds performance of monocular 3D pose estimation approaches from color as well as pose estimation exclusively from depth. Our approach builds on robust human keypoint detectors for color images and incorporates depth for lifting into 3D. We combine the system with our learning from demonstration framework to instruct a service robot without the need of markers. Experiments in real world settings demonstrate that our approach enables a PR2 robot to imitate manipulation actions obser…
RoboPEPP: Vision-Based Robot Pose and Joint Angle Estimation through Embedding Predictive Pre-Training
New York University Tandon School of Engineering（纽约大学Tandon工程学院）；New York University Courant Institute of Mathematical Sciences（纽约大学Courant数学科学研究所）；Meta-FAIR
Profactor GmbH（Profactor有限公司）；JKU Department of Computational Perception（约翰内斯开普勒大学计算感知系）
This paper considers the task of locating articulated poses of multiple robots in images. Our approach simultaneously infers the number of robots in a scene, identifies joint locations and estimates sparse depth maps around joint locations. The proposed method applies staged convolutional feature detectors to 2D image inputs and computes robot instance masks using a recurrent network architecture. In addition, regression maps of most likely joint locations in pixel coordinates together with depth information are computed. Compositing 3D robot joint kinematics is accomplished by applying masks …
Autonomous robotic systems operating in human environments must understand their surroundings to make accurate and safe decisions. In crowded human scenes with close-up human-robot interaction and robot navigation, a deep understanding requires reasoning about human motion and body dynamics over time with human body pose estimation and tracking. However, existing datasets either do not provide pose annotations or include scene types unrelated to robotic applications. Many datasets also lack the diversity of poses and occlusions found in crowded human scenes. To address this limitation we intro…
We present a novel continuous time trajectory representation based on a Chebyshev polynomial basis, which when governed by known dynamics models, allows for full trajectory and robot dynamics estimation, particularly useful for high-performance robotics applications such as unmanned aerial vehicles. We show that we can gracefully incorporate model dynamics to our trajectory representation, within a factor-graph based framework, and leverage ideas from pseudo-spectral optimal control to parameterize the state and the control trajectories as interpolating polynomials. This allows us to perform e…
We present a new dataset for 6-DoF pose estimation of known objects, with a focus on robotic manipulation research. We propose a set of toy grocery objects, whose physical instantiations are readily available for purchase and are appropriately sized for robotic grasping and manipulation. We provide 3D scanned textured models of these objects, suitable for generating synthetic training data, as well as RGBD images of the objects in challenging, cluttered scenes exhibiting partial occlusion, extreme lighting variations, multiple instances per image, and a large variety of poses. Using semi-autom…
Tensegrity robots, which are composed of compressive elements (rods) and flexible tensile elements (e.g., cables), have a variety of advantages, including flexibility, low weight, and resistance to mechanical impact. Nevertheless, the hybrid soft-rigid nature of these robots also complicates the ability to localize and track their state. This work aims to address what has been recognized as a grand challenge in this domain, i.e., the state estimation of tensegrity robots through a markerless, vision-based method, as well as novel, onboard sensors that can measure the length of the robot's cabl…
Benchmarking the Effects of Object Pose Estimation and Reconstruction on Robotic Grasping Success
Faculty of Electrical Engineering, Czech Technical University in Prague（捷克技术大学布拉格电子工程系）；Czech Institute of Informatics, Robotics and Cybernetics（捷克信息学、机器人学与自动化研究所）
Otto von Guericke University Magdeburg（马格德堡奥托·冯·格里克大学）
External localization is an essential part for the indoor operation of small or cost-efficient robots, as they are used, for example, in swarm robotics. We introduce a two-stage localization and instance identification framework for arbitrary robots based on convolutional neural networks. Object detection is performed on an external camera image of the operation zone providing robot bounding boxes for an identification and orientation estimation convolutional neural network. Additionally, we propose a process to generate the necessary training data. The framework was evaluated with 3 different…
This paper presents a comprehensive survey on vision-based robotic grasping. We conclude three key tasks during vision-based robotic grasping, which are object localization, object pose estimation and grasp estimation. In detail, the object localization task contains object localization without classification, object detection and object instance segmentation. This task provides the regions of the target object in the input data. The object pose estimation task mainly refers to estimating the 6D object pose and includes correspondence-based methods, template-based methods and voting-based meth…
RoboPCA: Pose-centered Affordance Learning from Human Demonstrations for Robot Manipulation
Key Laboratory of AI Safety of CAS, Institute of Computing Technology, Chinese Academy of Sciences（中国科学院人工智能安全重点实验室、计算技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）
6D object pose estimation aims to infer the relative pose between the object and the camera using a single image or multiple images. Most works have focused on predicting the object pose without associated uncertainty under occlusion and structural ambiguity (symmetricity). However, these works demand prior information about shape attributes, and this condition is hardly satisfied in reality; even asymmetric objects may be symmetric under the viewpoint change. In addition, acquiring and fusing diverse sensor data is challenging when extending them to robotics applications. Tackling these limit…
Traditional approaches to extrinsic calibration use fiducial markers and learning-based approaches rely heavily on simulation data. In this work, we present a learning-based markerless extrinsic calibration system that uses a depth camera and does not rely on simulation data. We learn models for end-effector (EE) segmentation, single-frame rotation prediction and keypoint detection, from automatically generated real-world data. We use a transformation trick to get EE pose estimates from rotation predictions and a matching algorithm to get EE pose estimates from keypoint predictions. We further…
Scalable Unseen Objects 6-DoF Absolute Pose Estimation with Robotic Integration
National Engineering Research Center for Robot Visual Perception and Control Technology, School of Artificial Intelligence and Robotics, Hunan University（机器人视觉感知与控制技术国家工程研究中心，人工智能与机器人学院，湖南大学）；School of Architecture and Art, Central South University（建筑与艺术学院，中南大学）；School of Computing and Communications, Lancaster University（计算与通讯学院，兰卡斯特大学）；Department of Computer Science and Software Engineering, The University of Western Australia（计算机科学与软件工程系，西澳大学）；School of Electrical and Electronic Engineering, Nanyang Technological University（电子与电气工程学院，南洋理工大学）
Keypoint detection is an essential building block for many robotic applications like motion capture and pose estimation. Historically, keypoints are detected using uniquely engineered markers such as checkerboards or fiducials. More recently, deep learning methods have been explored as they have the ability to detect user-defined keypoints in a marker-less manner. However, different manually selected keypoints can have uneven performance when it comes to detection and localization. An example of this can be found on symmetric robotic tools where DNN detectors cannot solve the correspondence pr…
With the development of computer vision, visual odometry is adopted by more and more mobile robots. However, we found that not only its own pose, but the poses of other moving objects are also crucial for the decision of the robot. In addition, the visual odometry will be greatly disturbed when a significant moving object appears. In this letter, a stereo-based multi-motion visual odometry method is proposed to acquire the poses of the robot and other moving objects. In order to obtain the poses simultaneously, a continuous motion segmentation module and a coordinate conversion module are appl…
University of Modena and Reggio Emilia（摩德纳-雷焦艾米利亚大学）；University of Bologna（博洛尼亚大学）
Knowing the exact 3D location of workers and robots in a collaborative environment enables several real applications, such as the detection of unsafe situations or the study of mutual interactions for statistical and social purposes. In this paper, we propose a non-invasive and light-invariant framework based on depth devices and deep neural networks to estimate the 3D pose of robots from an external camera. The method can be applied to any robot without requiring hardware access to the internal states. We introduce a novel representation of the predicted pose, namely Semi-Perspective Decouple…
