Applications of Fully Convolutional Networks (FCN) in iris segmentation have shown promising advances. For mobile and embedded systems, a significant challenge is that the proposed FCN architectures are extremely computationally demanding. In this article, we propose a resource-efficient, end-to-end iris recognition flow, which consists of FCN-based segmentation, contour fitting, followed by Daugman normalization and encoding. To attain accurate and efficient FCN models, we propose a three-step SW/HW co-design methodology consisting of FCN architectural exploration, precision quantization, and hardware acceleration. In our exploration, we propose multiple FCN models, and in comparison to previous works, our best-performing model requires 50X less FLOPs per inference while achieving a new state-of-the-art segmentation accuracy. Next, we select the most efficient set of models and further reduce their computational complexity through weights and activations quantization using 8-bit dynamic fixed-point (DFP) format. Each model is then incorporated into an end-to-end flow for true recognition performance evaluation. A few of our end-to-end pipelines outperform the previous state-of-the-art on two datasets evaluated. Finally, we propose a novel DFP accelerator and fully demonstrate the SW/HW co-design realization of our flow on an embedded FPGA platform. In comparison with the embedded CPU, our hardware acceleration achieves up to 8.3X speedup for the overall pipeline while using less than 15% of the available FPGA resources. We also provide comparisons between the FPGA system and an embedded GPU showing different benefits and drawbacks for the two platforms.
Convolutional Neural Networks (CNNs) are being increasingly used to address the problem of iris presentation attack detection. In this work, we propose attention-guided iris presentation attack detection (AG-PAD) to augment CNNs with attention mechanisms. Two types of attention modules are independently appended on top of the last convolutional layer of the backbone network. Specifically, the channel attention module is used to model the inter-channel relationship between features, while the position attention module is used to model inter-spatial relationship between features. An element-wise…
Iris recognition has emerged as one of the most accurate and convenient biometric for the human identification and has been increasingly employed in a wide range of e-security applications. The quality of iris images acquired at-a-distance or under less constrained imaging environments is known to degrade the iris matching accuracy. The periocular information is inherently embedded in such iris images and can be exploited to assist in the iris recognition under such non-ideal scenarios. Our analysis of such iris templates also indicates significant degradation and reduction in the region of in…
National University of Ireland Galway（爱尔兰国立高威大学）；University of Antwerp（安特卫普大学）
A data augmentation methodology is presented and applied to generate a large dataset of off-axis iris regions and train a low-complexity deep neural network. Although of low complexity the resulting network achieves a high level of accuracy in iris region segmentation for challenging off-axis eye-patches. Interestingly, this network is also shown to achieve high levels of performance for regular, frontal, segmentation of iris regions, comparing favorably with state-of-the-art techniques of significantly higher complexity. Due to its lower complexity, this network is well suited for deployment …
University of Notre Dame（圣母大学）；Research and Academic Computer Network（研究与学术计算机网络）
Subject matching performance in iris biometrics is contingent upon fast, high-quality iris segmentation. In many cases, iris biometrics acquisition equipment takes a number of images in sequence and combines the segmentation and matching results for each image to strengthen the result. To date, segmentation has occurred in 2D, operating on each image individually. But such methodologies, while powerful, do not take advantage of potential gains in performance afforded by treating sequential images as volumetric data. As a first step in this direction, we apply the Flexible Learning-Free Reconst…
An iris recognition system is vulnerable to presentation attacks, or PAs, where an adversary presents artifacts such as printed eyes, plastic eyes, or cosmetic contact lenses to circumvent the system. In this work, we propose an effective and robust iris PA detector called D-NetPAD based on the DenseNet convolutional neural network architecture. It demonstrates generalizability across PA artifacts, sensors and datasets. Experiments conducted on a proprietary dataset and a publicly available dataset (LivDet-2017) substantiate the effectiveness of the proposed method for iris PA detection. The p…
Towards Efficient Convolutional Neural Network for Embedded Hardware via Multi-Dimensional Pruning
School of Computer Science and Engineering, Nanyang Technological University（南洋理工大学计算机科学与工程学院）；HP-NTU Digital Manufacturing Corporate Lab, Nanyang Technological University（惠普-南洋理工大学数字制造联合实验室）；Department of Computer Science, Norwegian University of Science and Technology（挪威科技大学计算机科学系）
National Research University Higher School of Economics（国立研究型大学高等经济学院）；Lomonosov Moscow State University（罗蒙诺索夫莫斯科国立大学）
Human gait or walking manner is a biometric feature that allows identification of a person when other biometric features such as the face or iris are not visible. In this paper, we present a new pose-based convolutional neural network model for gait recognition. Unlike many methods that consider the full-height silhouette of a moving person, we consider the motion of points in the areas around human joints. To extract motion information, we estimate the optical flow between consecutive frames. We propose a deep convolutional model that computes pose-based gait descriptors. We compare different…
Eindhoven University of Technology（埃因霍温理工大学）；Philips Innovation Services（飞利浦创新服务）
Convolutional Neural Networks (CNNs) have proven to be a powerful state-of-the-art method for image classification tasks. One drawback however is the high computational complexity and high memory consumption of CNNs which makes them unfeasible for execution on embedded platforms which are constrained on physical resources needed to support CNNs. Quantization has often been used to efficiently optimize CNNs for memory and computational complexity at the cost of a loss of prediction accuracy. We therefore propose a method to optimally quantize the weights, biases and activations of each layer of…
In recent years many different deep neural networks were developed, but due to a large number of layers in deep networks, their training requires a long time and a large number of datasets. Today is popular to use trained deep neural networks for various tasks, even for simple ones in which such deep networks are not required. The well-known deep networks such as YoloV3, SSD, etc. are intended for tracking and monitoring various objects, therefore their weights are heavy and the overall accuracy for a specific task is low. Eye-tracking tasks need to detect only one object - an iris in a given …
Université de Montréal（蒙特利尔大学）；MILA；IMT Atlantique（IMT大西洋高等矿业学院）；Lab-STICC（STICC实验室）；ISCAS 2019（ISCAS 2019（会议名称，不提取））
Convolutional Neural Networks (CNNs) are state-of-the-art in numerous computer vision tasks such as object classification and detection. However, the large amount of parameters they contain leads to a high computational complexity and strongly limits their usability in budget-constrained devices such as embedded devices. In this paper, we propose a combination of a new pruning technique and a quantization scheme that effectively reduce the complexity and memory usage of convolutional layers of CNNs, and replace the complex convolutional operation by a low-cost multiplexer. We perform experimen…
Automated design methods for convolutional neural networks (CNNs) have recently been developed in order to increase the design productivity. We propose a neuroevolution method capable of evolving and optimizing CNNs with respect to the classification error and CNN complexity (expressed as the number of tunable CNN parameters), in which the inference phase can partly be executed using fixed point operations to further reduce power consumption. Experimental results are obtained with TinyDNN framework and presented using two common image classification benchmark problems -- MNIST and CIFAR-10.
Object detection is a major challenge in computer vision, involving both object classification and object localization within a scene. While deep neural networks have been shown in recent years to yield very powerful techniques for tackling the challenge of object detection, one of the biggest challenges with enabling such object detection networks for widespread deployment on embedded devices is high computational and memory requirements. Recently, there has been an increasing focus in exploring small deep neural network architectures for object detection that are more suitable for embedded d…
University of Waterloo（滑铁卢大学）；DarwinAI Corp.（DarwinAI公司）
Traffic sign recognition is a very important computer vision task for a number of real-world applications such as intelligent transportation surveillance and analysis. While deep neural networks have been demonstrated in recent years to provide state-of-the-art performance traffic sign recognition, a key challenge for enabling the widespread deployment of deep neural networks for embedded traffic sign recognition is the high computational and memory requirements of such networks. As a consequence, there are significant benefits in investigating compact deep neural network architectures for tra…
University of South Australia（南澳大学）；University of California, San Diego（加州大学圣地亚哥分校）；Western Sydney University（西悉尼大学）
Batch-normalization (BN) layers are thought to be an integrally important layer type in today's state-of-the-art deep convolutional neural networks for computer vision tasks such as classification and detection. However, BN layers introduce complexity and computational overheads that are highly undesirable for training and/or inference on low-power custom hardware implementations of real-time embedded vision systems such as UAVs, robots and Internet of Things (IoT) devices. They are also problematic when batch sizes need to be very small during training, and innovations such as residual connec…
University of Waterloo（滑铁卢大学）；DarwinAI Corp.（DarwinAI公司）
Object detection remains an active area of research in the field of computer vision, and considerable advances and successes has been achieved in this area through the design of deep convolutional neural networks for tackling object detection. Despite these successes, one of the biggest challenges to widespread deployment of such object detection networks on edge and mobile scenarios is the high computational and memory requirements. As such, there has been growing research interest in the design of efficient deep neural network architectures catered for edge and mobile usage. In this study, w…
With the ever increasing application of Convolutional Neural Networks to customer products the need emerges for models to efficiently run on embedded, mobile hardware. Slimmer models have therefore become a hot research topic with various approaches which vary from binary networks to revised convolution layers. We offer our contribution to the latter and propose a novel convolution block which significantly reduces the computational burden while surpassing the current state-of-the-art. Our model, dubbed EffNet, is optimised for models which are slim to begin with and is created to tackle issue…
The last few years have brought advances in computer vision at an amazing pace, grounded on new findings in deep neural network construction and training as well as the availability of large labeled datasets. Applying these networks to images demands a high computational effort and pushes the use of state-of-the-art networks on real-time video data out of reach of embedded platforms. Many recent works focus on reducing network complexity for real-time inference on embedded computing platforms. We adopt an orthogonal viewpoint and propose a novel algorithm exploiting the spatio-temporal sparsit…
We introduce an incremental processing scheme for convolutional neural network (CNN) inference, targeted at embedded applications with limited memory budgets. Instead of processing layers one by one, individual input pixels are propagated through all parts of the network they can influence under the given structural constraints. This depth-first updating scheme comes with hard bounds on the memory footprint: the memory required is constant in the case of 1D input and proportional to the square root of the input dimension in the case of 2D input.
Deploying state-of-the-art CNNs requires power-hungry processors and off-chip memory. This precludes the implementation of CNNs in low-power embedded systems. Recent research shows CNNs sustain extreme quantization, binarizing their weights and intermediate feature maps, thereby saving 8-32\x memory and collapsing energy-intensive sum-of-products into XNOR-and-popcount operations. We present XNORBIN, an accelerator for binary CNNs with computation tightly coupled to memory for aggressive data reuse. Implemented in UMC 65nm technology XNORBIN achieves an energy efficiency of 95 TOp/s/W and an a…
Convolutional Neural Networks (CNNs) are becoming increasingly popular due to their superior performance in the domain of computer vision, in applications such as objection detection and recognition. However, they demand complex, power-consuming hardware which makes them unsuitable for implementation on low-power mobile and embedded devices. In this paper, a description and comparison of various techniques is presented which aim to mitigate this problem. This is primarily achieved by quantizing the floating-point weights and activations to reduce the hardware requirements, and adapting the tra…
We propose model with larger spatial size of feature maps and evaluate it on object detection task. With the goal to choose the best feature extraction network for our model we compare several popular lightweight networks. After that we conduct a set of experiments with channels reduction algorithms in order to accelerate execution. Our vehicle detection models are accurate, fast and therefore suit for embedded visual applications. With only 1.5 GFLOPs our best model gives 93.39 AP on validation subset of challenging DETRAC dataset. The smallest of our models is the first to achieve real-time …
University of California, Irvine（加州大学欧文分校）；Northrop Grumman（诺斯洛普·格鲁曼公司）；University of Maryland（马里兰大学）；BrainChip LLC（BrainChip有限责任公司）
Neuromorphic computing is a promising solution for reducing the size, weight and power of mobile embedded systems. In this paper, we introduce a realization of such a system by creating the first closed-loop battery-powered communication system between an IBM TrueNorth NS1e and an autonomous Android-Based Robotics platform. Using this system, we constructed a dataset of path following behavior by manually driving the Android-Based robot along steep mountain trails and recording video frames from the camera mounted on the robot along with the corresponding motor commands. We used this dataset t…
Structured pruning is a popular method to reduce the cost of convolutional neural networks, that are the state of the art in many computer vision tasks. However, depending on the architecture, pruning introduces dimensional discrepancies which prevent the actual reduction of pruned networks. To tackle this problem, we propose a method that is able to take any structured pruning mask and generate a network that does not encounter any of these problems and can be leveraged efficiently. We provide an accurate description of our solution and show results of gains, in energy consumption and inferen…
With recent trend of wearable devices and Internet of Things (IoTs), it becomes attractive to develop hardware-based deep convolutional neural networks (DCNNs) for embedded applications, which require low power/energy consumptions and small hardware footprints. Recent works demonstrated that the Stochastic Computing (SC) technique can radically simplify the hardware implementation of arithmetic units and has the potential to satisfy the stringent power requirements in embedded devices. However, in these works, the memory design optimization is neglected for weight storage, which will inevitabl…
An ever increasing number of computer vision and image/video processing challenges are being approached using deep convolutional neural networks, obtaining state-of-the-art results in object recognition and detection, semantic segmentation, action recognition, optical flow and superresolution. Hardware acceleration of these algorithms is essential to adopt these improvements in embedded and mobile computer vision systems. We present a new architecture, design and implementation as well as the first reported silicon measurements of such an accelerator, outperforming previous work in terms of po…
A new trans-disciplinary knowledge area, Edge Artificial Intelligence or Edge Intelligence, is beginning to receive a tremendous amount of interest from the machine learning community due to the ever increasing popularization of the Internet of Things (IoT). Unfortunately, the incorporation of AI characteristics to edge computing devices presents the drawbacks of being power and area hungry for typical machine learning techniques such as Convolutional Neural Networks (CNN). In this work, we propose a new power-and-area-efficient architecture for implementing Articial Neural Networks (ANNs) in …
Convolutional neural networks are modern models that are very efficient in many classification tasks. They were originally created for image processing purposes. Then some trials were performed to use them in different domains like natural language processing. The artificial intelligence systems (like humanoid robots) are very often based on embedded systems with constraints on memory, power consumption etc. Therefore convolutional neural network because of its memory capacity should be reduced to be mapped to given hardware. In this paper, results are presented of compressing the efficient co…
Carnegie Mellon University（卡内基梅隆大学）；University of Oxford（牛津大学）；Google DeepMind（谷歌DeepMind）；Canadian Institute for Advanced Research（加拿大高等研究院）；Google（谷歌）；Georgia Institute of Technology（佐治亚理工学院）
The fully connected layers of a deep convolutional neural network typically contain over 90% of the network parameters, and consume the majority of the memory required to store the network parameters. Reducing the number of parameters while preserving essentially the same predictive performance is critically important for operating deep neural networks in memory constrained environments such as GPUs or embedded devices. In this paper we show how kernel methods, in particular a single Fastfood layer, can be used to replace all fully connected layers in a deep convolutional neural network. This …
