为快速垂直入水找到最佳船体形状
Finding optimal hull shapes for fast vertical penetration into water
摘要:
提出了一种将CFD模拟与解析法相结合的超空泡船体优化设计方法。考虑了弹体质量和口径固定的情况下,弹体以1 km/s的速度高速入水侵彻。利用FLUENT软件对6种不同的轴对称壳体(分别带有圆盘形、30°和10°锥形空化器)进行了第一阶段(直到6 m深度)的数值模拟。利用准定常法和CFD模拟得到的特性,对优化后的船型进行了计算。细长空化器的使用大大降低了局部压力,但较高的摩擦阻力也降低了超空泡穿透深度。优化后的圆锥形壳体比原来的圆柱形壳体能保证更深的侵彻深度。最细长的空化器与圆柱形船体确保小负载和非常深的渗透。
英文摘要:
A new approach for the supercavitating hull optimization was proposed, which combines the CFD simulation and analytical methods. The high-speed penetration into water at the velocity 1 km/s was considered with the fixed body mass and caliber. Six different axisymmetric hulls with disc, 30° and 10° conical cavitators were simulated with the use of FLUENT at the first stage of penetration (till the 6 m depth). The optimized hull shapes were calculated with the use of quasi-steady approach and the characteristics obtained by CFD simulation. The use of slender cavitators drastically decreases the local pressures, but the higher friction drag also reduces the depth of supercavitating penetration. Optimized conical hulls can ensure much deeper penetration in comparison with the initial cylindrical hulls. The slenderest cavitator with the cylindrical hull ensures small loads and very deep penetration.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。