SCNIFFER:低成本、自动化、高效的电磁侧通道嗅探
SCNIFFER: Low-Cost, Automated, Efficient Electromagnetic Side-Channel Sniffing
摘要:
电磁(EM)侧信道分析(SCA)是一种重要的工具,可以破解安全的加密引擎,特别是在资源受限的物联网设备上。目前,为了在嵌入式IoT设备上执行EM SCA,整个芯片被手动扫描,并且在芯片上的每个点处执行MTD(最小泄露痕迹)分析,以揭示加密算法的秘密密钥。然而,用于EM泄漏定位、跟踪采集和攻击的自动化端到端框架一直缺失。这项工作提出了SCNIFFER:一个低成本的,自动化的EM侧通道泄漏嗅探平台,以执行有效的端到端的侧信道攻击。使用泄漏测量,如TVLA或SNR,我们提出了一种贪婪的梯度搜索启发式算法,该算法在O(N)次迭代内收敛到芯片上最高EM泄漏点之一(维度:N x N),然后在该点执行相关EM分析(CEMA)。与穷举MTD分析相比,这将CEMA攻击时间减少了~N倍,与随机选择攻击位置相比,减少了> 20倍。我们演示了SCNIFFER使用低成本定制的3-D扫描仪与H场探头(< $500) compared to >$ 50,000商业EM扫描仪,和各种微控制器作为受攻击的设备。SCNIFFER框架针对在8位Atmega微控制器和32位ARM微控制器上运行的几种加密算法(AES-128、DES、RSA)进行评估,以找到高泄漏点,然后在该点执行CEMA。
英文摘要:
Electromagnetic (EM) side-channel analysis (SCA) is a prominent tool to break mathematically-secure cryptographic engines, especially on resource-constrained IoT devices. Presently, to perform EM SCA on an embedded IoT device, the entire chip is manually scanned and the MTD (Minimum Traces to Disclosure) analysis is performed at each point on the chip to reveal the secret key of the encryption algorithm. However, an automated end-to-end framework for EM leakage localization, trace acquisition, and attack has been missing. This work proposes SCNIFFER: a low-cost, automated EM Side Channel leakage SNIFFing platform to perform efficient end-to-end Side-Channel attacks. Using a leakage measure such as TVLA, or SNR, we propose a greedy gradient-search heuristic that converges to one of the points of highest EM leakage on the chip (dimension: N x N) within O(N) iterations, and then perform Correlational EM Analysis (CEMA) at that point. This reduces the CEMA attack time by ~N times compared to an exhaustive MTD analysis, and >20x compared to choosing an attack location at random. We demonstrate SCNIFFER using a low-cost custom-built 3-D scanner with an H-field probe (<$500) compared to >$50,000 commercial EM scanners, and a variety of microcontrollers as the devices under attack. The SCNIFFER framework is evaluated for several cryptographic algorithms (AES-128, DES, RSA) running on both an 8-bit Atmega microcontroller and a 32-bit ARM microcontroller to find a point of high leakage and then perform a CEMA at that point.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。