Electroluminescence and current-voltage measurements of single (In,Ga)N/GaN nanowire light-emitting diodes in the nanowire ensemble
David van Treeck, Johannes Ledig, Gregor Scholz, Jonas Lähnemann, Mattia Musolino, Abbes Tahraoui, Oliver Brandt, Andreas Waag, Henning Riechert, Lutz Geelhaar
We present the combined analysis of the electroluminescence (EL) as well as the current-voltage (I-V) behavior of single, freestanding (In,Ga)N/GaN nanowire (NW) light-emitting diodes (LEDs) in an unprocessed, self-assembled ensemble grown by molecular beam epitaxy. The data were acquired in a scanning electron microscope equipped with a micromanipulator and a luminescence detection system. Single NW spectra consist of emission lines originating from different quantum wells, and the width of the spectra increases with decreasing peak emission energy. The corresponding I-V characteristics are described well by the modified Shockley equation. The key advantage of this measurement approach is the possibility to correlate the EL intensity of a single NW LED with the actual current density in this NW. This way, the external quantum efficiency (EQE) can be investigated as a function of the current in a single NW LED. The comparison of the EQE characteristic of single NWs and the ensemble device allows a quite accurate determination of the actual number of emitting NWs in the working ensemble LED and the respective current densities in its individual NWs. This information is decisive for a meaningful and comprehensive characterization of a NW ensemble device, rendering the measurement approach employed here a very powerful analysis tool.
We study the magneto-transport and magneto-electroluminescence properties of purely n-doped GaAs/Al$_{0.6}$Ga$_{0.4}$As resonant tunneling diodes with an In$_{0.15}$Ga$_{0.85}$As quantum well and emitter prewell. Before the resonant current condition, magneto-transport measurements reveal charge carrier densities comparable for diodes with and without the emitter prewell. The Landau level splitting is observed in the electroluminescence emission from the emitter prewell, enabling the determination of the charge carrier build-up. Our findings show that magneto-electroluminescence spectroscopy t…
Efficient generation of single photons on demand at a high repetition rate is a key to the practical realization of quantum-communication networks and optical quantum computations. Color centers in diamond are considered to be the most promising platform for building such single-photon sources owing to the outstanding emission properties of color centers at room temperature. However, their efficient electrical excitation remains a challenge due to the inability to create a high density of free electrons in diamond. Here, we show that using the self-gating effect in a diamond p-i-n diode, one c…
Colloidal quantum dots (QDs) are promising emitters for electroluminescence devices (QD light-emitting-diodes, QLEDs). Though QDs have been synthesized with efficient and stable photoluminescence, inheriting their superior luminescence in QLEDs remains challenging. This is commonly attributed to unbalanced charge injection and/or interfacial exciton quenching in the devices, instead of lack of suited QD materials. Here, a general but previously overlooked degradation channel in QLEDs, i.e., operando electrochemical reactions of surface ligands with injected charge carriers, is identified after…
This article presents the use of flexible carbon substrates for the growth of III-nitride nanowire light emitters. A dense packing of gallium nitride nanowires were grown on a carbon paper substrate. The nanowires grew predominantly along the a-plane direction, normal to the local surface of the carbon paper. Strong photo- and electro-luminescence was observed from InGaN quantum well light emitting diode nanowires.
Perovskite nanoplatelets (NPls) hold great promise for light-emitting applications, having achieved high photoluminescence quantum efficiencies (PLQEs) approaching unity in the blue wavelength range, where other metal-halide perovskites have typically been ineffective. However, the external quantum efficiency (EQE) of blue-emitting NPl light-emitting diodes (LEDs) have only reached 0.12%, with typical values well below 0.1%. In this work, we show that the performance of NPl LEDs is primarily hindered by a poor electronic interface between the emitter and hole-injector. Through Kelvin Probe and…
Factors determining the carrier distribution in InGaN/GaN multiple-quantum-well (MQW) light-emitting diodes (LEDs) are studied via photoluminescence and temperature-dependent electroluminescence spectra. Employing a dichromatic LED device, we demonstrate that the carrier recombination rate should be considered playing an important role in determining the carrier distribution in the MQW active region, not just the simple hole characteristics such as low mobility and large effective mass.
A GaN resonant cavity light emitting diode was built on a GaN-AlN distributed Bragg reflector grown on a silicon substrate. The electroluminescence output increased by 2.5 times for a GaN diode coupled to a properly designed resonant cavity. Theoretical calculations showed that this enhancement could increase up to four times for transmission through a sem-transparent metal contact design, up to eight times for a flip-chip design
High-quality N-polar GaN p-n diodes are realized on single-crystal N-polar GaN bulk substrate by plasma-assisted molecular beam epitaxy. The room-temperature current-voltage characteristics reveal a high on/off current ratio of 10^11 at 4 V and an ideality factor of 1.6. As the temperature increases to 200 C, the apparent ideality factor gradually approaches 2. At such high temperatures, Shockley-Read-Hall recombination times of 0.32-0.46 ns are estimated. The measured electroluminescence spectrum is dominated by a strong near-band edge emission, while deep level and acceptor-related luminesce…
We report on the demonstration of the first axial AlInN ultraviolet core-shell nanowire light-emitting diodes with highly stable emission in the UV wavelength range. During the epitaxial growth of AlInN layer, an AlInN shell is spontaneously formed, resulted in the reduced nonradiative recombination on nanowire surface. The AlInN nanowires exhibit high internal quantum efficiency of ~ 52% at room temperature for emission at 295nm. The peak emission wavelength can be varied from 290 nm to 355 nm by changing the growth condition. Moreover, significantly strong transverse magnetic (TM) polarized …
Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and brightness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, …
We report on the illustration of the first electron blocking layer (EBL) free AlInN nanowire light-emitting diodes (LEDs) operating in the deep ultraviolet (DUV) wavelength region (sub-250 nm). We have systematically analyzed the results using APSYS software and compared with simulated AlGaN nanowire DUV LEDs. From the simulation results, significant efficiency droop was observed in AlGaN based devices, attributed to the significant electron leakage. However, compared to AlGaN nanowire DUV LEDs at similar emission wavelength, the proposed single quantum well (SQW) AlInN based light-emitters of…
Carbene-metal-amide type photoemitters based on CF$_3$-substituted carbazolate ligands show sky-blue to deep-blue photoluminescence from charge-transfer excited states. They are suitable for incorporation into organic light-emitting diodes (OLEDs) by thermal vapour deposition techniques, either embedded within a high-triplet-energy host, or used host-free. We report high-efficiency OLEDs with emission ranging from yellow to blue (Commission Internationale de l'Éclairage (CIE) coordinates from [0.35, 0.53] to [0.17, 0.17]). The latter show a peak electroluminescence external quantum efficiency …
Electrically driven single-photon sources are essential for building compact, scalable and energy-efficient quantum information devices. Recently, color centers in SiC emerged as promising candidates for such nonclassical light sources. However, very little is known about how to control, dynamically tune and switch their single-photon electroluminescence (SPEL), which is required for efficient generation of single photons on demand. Here, we propose and theoretically demonstrate a concept of a gate-tunable single-photon emitting diode, which allows not only to dynamically tune the SPEL rate in…
This article presents the use of flexible metal foam substrates for the growth of III-nitride nanowire light emitters to tackle the inherent limitations of thin-film light emitting diodes as well as fabrication and application issues of traditional substrates. A dense packing of gallium nitride nanowires were grown on a nickel foam substrate. The nanowires grew predominantly along the a-plane direction, normal to the local surface of the nickel foam. Strong luminescence was observed from undoped GaN and InGaN quantum well light emitting diode nanowires.
Layered two-dimensional (2-D) semiconductors can be combined with other low-dimensional semiconductors to form non-planar mixed-dimensional van der Waals (vdW) heterojunctions whose charge transport behavior is influenced by the heterojunction geometry, providing a new degree of freedom to engineer device functions. Towards that end, we investigated the photoresponse of Si nanowire/MoS2 heterojunction diodes with scanning photocurrent microscopy and time-resolved photocurrent measurements. Comparison of n-Si/MoS2 isotype heterojunctions with p-Si/MoS2 heterojunction diodes under varying biases…
Spin-spin interactions in organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) are pivotal because radiative recombination is largely determined by triplet-to-singlet conversion, also called reverse intersystem crossing (RISC). To explore the underlying process, we apply a spin-resonance spectral hole-burning technique to probe electroluminescence. We find that the triplet exciplex states in OLEDs are highly spin-polarized and show that these states can be decoupled from the heterogeneous nuclear environment as a source of spin dephasing and can even b…
We demonstrate exciton and charged exciton (trion) electroluminescence from frozen p-n junctions in networks of polymer-sorted, semiconducting (6,5) single-walled carbon nanotubes. Electrolyte-gating with an ionic liquid was employed to achieve injection and accumulation of high densities of holes and electrons in the nanotube network at low applied voltages. Static p-n junctions were formed by cooling the devices below the melting point of the ionic liquid while in the ambipolar regime. These frozen junctions showed diode-like rectification and enabled the investigation of electron-hole recom…
A silicon light source at communication wavelength is the bottleneck for developing monolithically integrated silicon photonics. Doping silicon with erbium ions was believed to be one of the most promising approaches but suffers from the aggregation of erbium ions that are efficient non-radiative centers, formed during the standard rapid thermal treatment. Here, we apply a deep cooling process following the high-temperature annealing to suppress the aggregation of erbium ions by flushing with Helium gas cooled in liquid nitrogen. The resultant light emitting efficiency is increased to a record…
Half-light half-matter quasiparticles termed exciton-polaritons arise through the strong coupling of excitons and cavity photons. They have been used to demonstrate a wide array of fundamental phenomena and potential applications ranging from Bose-Einstein like condensation to analog Hamiltonian simulators and chip-scale interferometers. Recently the two dimensional transition metal dichalcogenides (TMDs) owing to their large exciton binding energies, oscillator strength and valley degree of freedom have emerged as a very attractive platform to realize exciton-polaritons at elevated temperatur…
The low efficiency of metal halide perovskite light-emitting diodes (PeLEDs) with blue emission block their potential applications in large-area full-color displays and solid-state lighting. A delicate control over the entire electroluminescence process is indispensable to overcome the efficiency limitations of blue PeLEDs. Here, we demonstrate an efficient device architecture to synergistically reduce the energetic losses during electron-photon conversion and boost the extraction of trapped light in the device. An interfacial nucleation seeding scheme is proposed to control the crystallizatio…
The radiative recombination of injected charge carriers gives rise to electroluminescence (EL), a central process for light-emitting diode (LED) operation. It is often presumed in some emerging fields of optoelectronics, including perovskite and organic LEDs, that the minimum voltage required for light emission is the semiconductor bandgap divided by the elementary charge. Here we show for many classes of LEDs, including those based on metal halide perovskite, organic, chalcogenide quantum-dot and commercial III-V semiconductors, photon emission can be generally observed at record-low driving …
Surface recombination affects both light-to-electricity and electricity-to-light conversion in solar cells (SCs). Therefore, quantitative analysis and reduction of surface recombination is an important direction in SC research. In this work, electroluminescence (EL) intensity and photoconversion efficiency of a set of 93 large-area (239\,cm$^2$) a-Si:H/c-Si heterojunction SCs (HJSCs) are measured under AM1.5 conditions at 298 K. The HJSC samples differed only in surface recombination velocity, $S$, but otherwise were identical. Variation in $S$ was due to the variation of the chemical conditio…
Core-shell GaAs-based nanowires monolithically integrated on Si constitute a promising class of nanostructures that could enable light emitters for fast inter- and intrachip optical connections. We introduce and fabricate a novel coaxial GaAs/(In,Ga)As dot-in-a-well nanowire heterostructure to reach spontaneous emission in the Si transparent region, which is crucial for applications in Si photonics. Specifically, we achieve room temperature emission at 1.27 $μ$m in the telecommunication O band. The presence of quantum dots in the heterostructure is evidenced by a structural analysis based on s…
Nanowire (NW)-based opto-electronic devices require certain engineering in the NW geometry to realize polarized-dependent light sources and photodetectors. We present a growth procedure to produce InAs/InP quantum dot-nanowires (QD-NWs) with an elongated top-view cross-section relying on the vapor-liquid-solid method using molecular beam epitaxy. By interrupting the rotation of the sample during the radial growth sequence of the InP shell, hexagonal asymmetric (HA) NWs with long/short cross-section axes were obtained instead of the usual symmetrical shape. Polarization-resolved photoluminescen…
Light-emitting diodes based on perovskite nanocrystals (PNCs-LEDs) have gained great interest for next-generation display and lighting technologies prized for their color purity, high brightness and luminous efficiency approaching the intrinsic limit imposed by extraction of electroluminescence from the device structure. Although the time is ripe for the development of effective light outcoupling strategies to further boost the device performance, this technologically relevant aspect of PNC-LEDs is still without a definitive solution. Here, following theoretical guidelines and without the inte…
Recently, the use of bottom-TJ geometry in LEDs, which achieves N-polar-like alignment of polarization fields in conventional metal-polar orientations, has enabled enhancements in LED performance due to improved injection efficiency. Here, we elucidate the root causes behind the enhanced injection efficiency by employing mature laser diode structures with optimized heterojunction GaN/In$_{0.17}$Ga$_{0.83}$N/GaN TJs and UID GaN spacers to separate the optical mode from the heavily doped absorbing p-cladding regions. In such laser structures, polarization offsets at the electron blocking layer, …
We demonstrate cryogenic, electrically-injected, waveguide-coupled Si light-emitting diodes (LEDs) operating at 1.22 $μ$m. The active region of the LED consists of W centers implanted in the intrinsic region of a $p$-$i$-$n$ diode. The LEDs are integrated on waveguides with superconducting nanowire single-photon detectors (SNSPDs). We demonstrate the scalability of this platform with an LED coupled to eleven SNSPDs in a single integrated photonic device. Such on-chip optical links may be useful for quantum information or neuromorphic computing applications.
Electron Holographic Tomography was used to obtain 3-dimensional reconstructions of the morphology and electrostatic potential gradient of axial GaInP/InP nanowire tunnel diodes. Crystal growth was carried out in two opposite directions: GaInP:Zn/InP:S and InP:Sn/GaInP:Zn, using Zn as the p-type dopant in the GaInP, but with changes to the n-type dopant (S or Sn) in the InP. Secondary electron and electron beam induced current images obtained using scanning electron microscopy indicated the presence of p-n junctions in both cases and current-voltage characteristics measured via lithographic co…
We report on a process for the fiber-coupling of electrically driven cavity-enhanced quantum dot light emitting devices. The developed technique allows for the direct and permanent coupling of p-i-n-doped quantum dot micropillar cavities to single-mode optical fibers. The coupling process, fully carried out at room temperature, involves a spatial scanning technique, where the fiber facet is positioned relative to a device with a diameter of 2 $μ$m using the fiber-coupled electroluminescence of the cavity emission as a feedback parameter. Subsequent gluing and UV curing enables a rigid and perm…
Semiconducting piezoelectric materials have attracted considerable interest due to their central role in the emerging field of piezotronics, where the development of a piezo-potential in response to stress or strain can be used to tune the band structure of the semiconductor, and hence its electronic properties. This coupling between piezoelectricity and semiconducting properties can be readily exploited for force or pressure sensing using nanowires, where the geometry and unclamped nature of nanowires render them particularly sensitive to small forces. At the same time, piezoelectricity is kn…
Perovskite-based optoelectronic devices have gained significant attention due to their remarkable performance and low processing cost, particularly for solar cells. However, for perovskite light-emitting diodes (LEDs), non-radiative charge carrier recombination has limited electroluminescence (EL) efficiency. Here we demonstrate perovskite-polymer bulk heterostructure LEDs exhibiting record-high external quantum efficiencies (EQEs) exceeding 20%, and an EL half-life of 46 hours under continuous operation. This performance is achieved with an emissive layer comprising quasi-2D and 3D perovskite…
Low dimensional perovskites are considered good candidates for light emitting applications given the high exciton binding energy which should in principle improve the radiative recombination efficiency. Yet, single-layered two-dimensional (2D) perovskite films are strongly limited by trap-assisted recombination and suffer from low luminescence yields, hampering their application in electroluminescence devices. Here, we use ad hoc synthetic and defect engineering strategies to overcome such issue. We employ metallic doping to controllably introduce luminescent impurities in a matrix made of 2D …
Photonic quantum technologies promise a revolution of the world of information processing, from simulation and computing to communication and sensing, thanks to the many advantages of exploiting single photons as quantum information carriers. In this scenario, single-photon detectors play a key role. On the one hand, superconducting nanowire single-photon detectors (SNSPDs) are able to provide remarkable performance on a broad spectral range, but their applicability is often limited by the need of cryogenic operating temperatures. On the other hand, single-photon avalanche diodes (SPADs) overc…
