We consider random walk model of a semi-flexible polymer chain on a square and a cubic lattice to enumerate conformations of the polymer chain in two and three dimensions, respectively. The bending energy of the chain is assumed as the key factor which controls the minimum average length of the chain in between two successive bends in the chain; and the average length of the chains per unit bend is defined as the persistence length of the polymer chain. It has been found that the minimum energy required to bend the chain is expressed in the form of simple relation which includes space dimensionality, step fugacity and persistence length.
We study the spontaneous out-of-plane bending of a planar untwisted ribbon composed of nematic polymer networks activated by a change in temperature. Our theory accounts for both stretching and bending energies, which compete to establish equilibrium. We show that when equilibrium is attained these energy components obey a \emph{complementarity} relation: one is maximum where the other is minimum. Moreover, we identify a \emph{bleaching} regime: for sufficiently large values of an activation parameter (which measures the mismatch between the degrees of order in polymer organization in the refe…
A coarse-grained computational model is used to investigate how the bending rigidity of a polymer under tension affects the formation of a trefoil knot. Thermodynamic integration techniques are applied to demonstrate that the free-energy cost of forming a knot has a minimum at non-zero bending rigidity. The position of the minimum exhibits a power-law dependence on the applied tension. For knotted polymers with non-uniform bending rigidity, the knots preferentially localize in the region with a bending rigidity that minimizes the free-energy.
We study the translocation of a semiflexible polymer through extended pores with patterned stickiness, using Langevin dynamics simulations. We find that the consequence of pore patterning on the translocation time dynamics is dramatic and depends strongly on the interplay of polymer stiffness and pore-polymer interactions. For heterogeneous polymers with periodically varying stiffness along their lengths, we find that variation of the block size of the sequences and the orientation, results in large variations in the translocation time distributions. We show how this fact may be utilized to de…
To describe the full spectrum of surface fluctuations of the interface between phase-separated colloid-polymer mixtures from low scattering vector q (classical capillary wave theory) to high q (bulk-like fluctuations), one must take account of the interface's bending rigidity. We find that the bending rigidity is negative and that on approach to the critical point it vanishes proportionally to the interfacial tension. Both features are in agreement with Monte Carlo simulations.
We investigate the mechanical properties of amorphous polymers by means of coarse-grained simulations and nonaffine lattice dynamics theory. A small increase of polymer chain bending stiffness leads first to softening of the material, while hardening happens only upon further strengthening of the backbones. This nonmonotonic variation of the storage modulus $G'$ with bending stiffness is caused by a competition between additional resistance to deformation offered by stiffer backbones and decreased density of the material due to a necessary decrease in monomer-monomer coordination. This counter…
We present a theory for the elasticity of cross-linked stiff polymer networks. Stiff polymers, unlike their flexible counterparts, are highly anisotropic elastic objects. Similar to mechanical beams stiff polymers easily deform in bending, while they are much stiffer with respect to tensile forces (``stretching''). Unlike in previous approaches, where network elasticity is derived from the stretching mode, our theory properly accounts for the soft bending response. A self-consistent effective medium approach is used to calculate the macroscopic elastic moduli starting from a microscopic charac…
Many charged polymers, including nucleic acids, are locally stiff. Their bending rigidity -- quantified by the persistence length --, depends crucially on Coulombic features, such as the ionic strength of the solution which offers a convenient experimental route for tuning the rigidity. While the classic Odijk-Skolnick-Fixman treatment fails for realistic parameter values, we derive a simple analytical formula for the electrostatic persistence length. It is shown to be in remarkable agreement with numerically obtained Poisson-Boltzmann theory results, thereby fully accounting for non-lineariti…
Simple expressions for the bending and the base-stacking energy of double-stranded semiflexible biopolymers (such as DNA and actin) are derived. The distribution of the folding angle between the two strands is obtained by solving a Schrödinger equation variationally. Theoretical results based on this model on the extension versus force and extension versus degree of supercoiling relations of DNA chain are in good agreement with the experimental observations of Cluzel {\it et al.} [Science {\bf 271}, 792 (1996)], Smith {\it et al.} [{\it ibid.} {\bf 271}, 795 (1996)], and Strick {\it et al.} [{…
Using a combination of the replica-exchange Monte Carlo algorithm and the multicanonical method, we investigate the influence of bending stiffness on the conformational phases of a bead-stick homopolymer model and present the pseudo-phase diagram for the complete range of semi-flexible polymers, from flexible to stiff. Although a simple model, we observe a rich variety of conformational phases, reminiscent of conformations observed for synthetic polymers or biopolymers. Changing the internal bending stiffness, the model exhibits different pseudo phases like bent, hairpin or toroidal. In partic…
We employ the recently introduced generalized microcanonical inflection point method for the statistical analysis of phase transitions in flexible and semiflexible polymers and study the impact of the bending stiffness upon the character and order of transitions between random-coil, globules, and pseudocrystalline conformations. The high-accuracy estimates of the microcanonical entropy and its derivatives required for this study were obtained by extensive replica-exchange Monte Carlo simulations. We observe that the transition behavior into the compact phases changes qualitatively with increas…
Several nontrivial properties are shown for the mean square radius of gyration $R_K^2$ of ring polymers with a fixed knot type K. Through computer simulation, we discuss both finite-size and asymptotic behaviors of the gyration radius under the topological constraint for self-avoiding polygons consisting of N cylindrical segments with radius r. We find that the average size of ring polymers with a knot K can be much larger than that of no topological constraint. The effective expansion due to the topological constraint depends strongly on the parameter r which is related to the excluded volume…
The Kremer-Grest (KG) model is a standard for studying generic polymer properties. Here we have equilibrated KG melts up to and beyond $200$ entanglements per chain for varying chain stiffness. We present methods for estimating the Kuhn length corrected for incompressibility effects, for estimating the entanglement length corrected for chain stiffness, for estimating bead frictions and Kuhn times taking into account entanglement effects. These are the key parameters for enabling quantitative, accurate, and parameter free comparisons between theory, experiment and simulations of KG polymer mode…
We develop further a statistical model coupling denaturation and chain conformations in DNA (Palmeri J, Manghi M and Destainville N 2007 Phys. Rev. Lett. 99 088103). Our Discrete Helical Wormlike Chain model takes explicitly into account the three elastic degrees of freedom, namely stretching, bending and torsion of the polymer. By integrating out these external variables, the conformational entropy contributes to bubble nucleation (opening of base-pairs), which sheds light on the DNA melting mechanism. Because the values of monomer length, bending and torsional moduli differ significantly in …
By performing Monte Carlo sampling of $N$-steps self-avoiding polygons embedded on different Bravais lattices we explore the robustness of universality in the entropic, metric and geometrical properties of knotted polymer rings. In particular, by simulating polygons with $N$ up to $10^5$ we furnish a sharp estimate of the asymptotic values of the knot probability ratios and show their independence on the lattice type. This universal feature was previously suggested although with different estimates of the asymptotic values. In addition we show that the scaling behavior of the mean squared radi…
We discuss the scattering function of a Gaussian random polygon with N nodes under a given topological constraint through simulation. We obtain the Kratky plot of a Gaussian polygon of N=200 having a fixed knot for some different knots such as the trivial, trefoil and figure-eight knots. We find that some characteristic properties of the different Kratky plots are consistent with the distinct values of the mean square radius of gyration for Gaussian polygons with the different knots.
We perform molecular-dynamics simulations for polymer melts of the coarse-grained polyvinyl alcohol model that crystallizes upon slow cooling. To establish the properties of its high temperature liquid state as a reference point, we characterize in detail the structural features of equilibrated polymer melts with chain lengths $5\le N \le 1000$ at a temperature slightly above their crystallization temperature. We find that the conformations of sufficiently long polymers with $N >50$ obey essentially the Flory's ideality hypothesis. The chain length dependence of the end-to-end distance and the…
Nematic polymeric networks are (heat and light) activable materials, which combine the features of rubber and nematic liquid crystals. When only the stretching energy of a thin sheet of nematic polymeric network is minimized, the intrinsic (Guassian) curvature of the shape it takes upon (thermal or optical) actuation is determined. This, unfortunately, produces a multitude of possible shapes, for which we need a selection criterion, which may only be provided by a correcting bending energy depending on the extrinsic curvatures of the deformed shape. The literature has so far offered approximat…
Based on the wormlike chain model, a coarse-grained description of the nonlinear dynamics of a weakly bending semiflexible polymer is developed. By means of a multiple scale perturbation analysis, a length-scale separation inherent to the weakly-bending limit is exploited to reveal the deterministic nature of the spatio-temporal relaxation of the backbone tension and to deduce the corresponding coarse-grained equation of motion. From this partial integro-differential equation, some detailed analytical predictions for the non-linear response of a weakly bending polymer are derived in an accompa…
Amorphous materials exhibit peculiar mechanical and vibrational properties, including non-affine elastic responses and excess vibrational states, i.e., the so-called boson peak. For polymer glasses, these properties are considered to be affected by the bending rigidity of the constituent polymer chains. In our recent work [Tomoshige, et al., Sci. Rep. 9 19514 (2019)], we have revealed simple relationships between the variations of vibrational properties and the global elastic properties: the response of the boson peak scales only with that of the global shear modulus. This observation suggests…
The strong bending of polymers is poorly understood. We propose a general quantitative framework of polymer bending that includes both the weak and strong bending regimes on the same footing, based on a single general physical principle. As the bending deformation increases beyond a certain (polymer-specific) point, the change in the convexity properties of the effective bending energy of the polymer makes the harmonic deformation energetically unfavorable: in this strong bending regime the energy of the polymer varies linearly with the average bending angle as the system follows the convex hu…
Monte Carlo simulations are used to study the translocation of a polymer into a cavity. Modeling the polymer as a hard-sphere chain with a length up to N=601 monomers, we use a multiple-histogram method to measure the variation of the conformational free energy of the polymer with respect to the number of translocated monomers. The resulting free-energy functions are then used to obtain the confinement free energy for the translocated portion of the polymer. We characterize the confinement free energy for a flexible polymer in cavities with constant cross-sectional area A for various cavity sh…
The excess low-frequency vibrational spectrum, called boson peak, and non-affine elastic response are the most important particularities of glasses. Herein, the vibrational and mechanical properties of polymeric glasses are examined by using coarse-grained molecular dynamics simulations, with particular attention to the effects of the bending rigidity of the polymer chains. As the rigidity increases, the system undergoes a glass transition at a higher temperature (under a constant pressure), which decreases the density of the glass phase. The elastic moduli, which are controlled by the decreas…
The nature of the globule-coil transition of surface-confined polymers has been an issue of debate. Here this 2D collapse transition is studied through a partially directed lattice model. In the general case of polymers with positive bending stiffness ($Δ>0$), the collapse transition is {\em first-order}; it becomes {\em second-order} only in the limiting case of zero bending stiffness ($Δ\equiv 0$). These analytical results are confirmed by Monte Carlo simulations. We also suggest some possible future experiments.
We explore the effect of an attractive interaction between parallel-aligned polymers, which are perpendicularly grafted on a substrate. Such an attractive interaction could be due to, e.g., reversible cross-links. The competition between permanent grafting favoring a homogeneous state of the polymer brush and the attraction, which tends to induce in-plane collapse of the aligned polymers, gives rise to an instability of the homogeneous phase to a bundled state. In this latter state the in-plane translational symmetry is spontaneously broken and the density is modulated with a finite wavelength…
The mechanics of complex soft matter often cannot be understood in the classical physical frame of flexible polymers or rigid rods. The underlying constituents are semiflexible polymers, whose finite bending stiffness ($κ$) leads to non-trivial mechanical responses. A natural model for such polymers is the protein actin. Experimental studies of actin networks, however, are limited since the persistence length ($l_{\text{p}} \propto κ$) cannot be tuned. Here, we experimentally characterize this parameter for the first time in entangled networks formed by synthetically produced, structurally tun…
We demonstrate that a semiflexible bundle of wormlike chains exhibits a state-dependent bending stiffness that alters fundamentally its scaling behavior with respect to the standard wormlike chain. We explore the equilibrium conformational and mechanical behavior of wormlike bundles in isolation, in crosslinked networks, and in solution.
By means of extensive replica-exchange simulations of generic coarse-grained models for helical polymers, we systematically investigate the structural transitions into all possible helical phases for flexible and semiflexible elastic polymers with self-interaction under the influence of torsion barriers. The competing interactions lead to a variety of conformational phases including disordered helical arrangements, single helices, and ordered, tertiary helix bundles. Most remarkably, we find that a bending restraint entails a clear separation and stabilization of the helical phases. This aids …
Using analytical approach and Monte-Carlo (MC) simulations, we study the elastic behaviour of the intrinsically twisted elastic ribbons with bending anisotropy, such as double-stranded DNA (dsDNA), in two-dimensional (2D) confinement. We show that, due to the bending anisotropy, the persistence length of dsDNA in 2D conformations is always greater than 3D conformations. This result is in consistence with the measured values for DNA persistence length in 2D and 3D in equal biological conditions. We also show that in 2D, an anisotropic, intrinsically twisted polymer exhibits an implicit twist-be…
We use the worm-like chain model to analytically calculate the linear response of a grafted semiflexible polymer to a uniform force field. The result is a function of the bending stiffness, the temperature, the total contour length, and the orientation of the field with respect to that of the grafted end. We also study the linear response of a worm-like chain with a periodic alternating sequence of positive and negative charges. This can be considered as a model for a polyampholyte with intrinsic bending siffness and negligible intramolecular interactions. We show how the finite intrinsic pers…
Motivated by recent free-standing graphene experiments, we show how thermal fluctuations affect the mechanical properties of microscopically thin solid ribbons. A renormalization group analysis of flexural phonons reveals that elongated ribbons behave like highly anisotropic polymers, where the two dimensional nature of ribbons is reflected in non-trivial power law scalings of the persistence length and effective bending and twisting rigidities with the ribbon width. With a coarse-grained transfer matrix approach, we then show how thermalized ribbons respond to pulling and bending forces over …
In this work, we present a simple and efficient generator of polymeric linear chains, based on a random self-avoiding walk process. The chains are generated using a discrete process of growth, in cubic networks and in a finite time, without border limits and without exploring all the configurational space. First, we thoroughly describe the chains morphology exploring the statistics of two characteristic distances, the radius of gyration and the end-to-end distance. Moreover, we examine the dependence of mean characteristic distances with the number of steps (N). Despite the simplicity of our p…
We consider a model consisting of a self-avoiding polygon occupying a variable density of the sites of a square lattice. A fixed energy is associated with each $90^\circ$-bend of the polygon. We use a grand canonical ensemble, introducing parameters $μ$ and $β$ to control average density and average (total) energy of the polygon, and show by Monte Carlo simulation that the model has a first order, nematic phase transition across a curve in the $β$-$μ$ plane.
We study a liquid of zigzagging two-dimensional directed polymers with bending rigidity, i.e., polymers whose conformations follow checkerboard paths. In the continuum limit the statistics of such polymers obey the Dirac equation for particles of imaginary mass. We exploit this observation to investigate a liquid of these polymers via a quantum many-fermion analogy. A self-consistent approximation predicts a phase of tilted order, in which the polymers may develop a preference to zig rather than zag. We compute the phase diagram and key response functions for the polymer liquid, and comment on…
The random-force (Larkin) model of a directed elastic string subject to quenched random forces in the transverse directions has been a paradigm in the statistical physics of disordered systems. In this brief note, we investigate a modified version of the above model where the total transverse force along the polymer contour and the related total torque, in each realization of disorder, vanish. We discuss the merits of adding these constraints and show that they leave the qualitative behavior in the strong stretching regime unchanged, but they reduce the effects of the random force by significa…
DNA bending on length scales shorter than a persistence length plays an integral role in the translation of genetic information from DNA to cellular function. Quantitative experimental studies of these biological systems have led to a renewed interest in the polymer mechanics relevant for describing the conformational free energy of DNA bending induced by protein-DNA complexes. Recent experimental results from DNA cyclization studies have cast doubt on the applicability of the canonical semiflexible polymer theory, the wormlike chain (WLC) model, to DNA bending on biological length scales. Thi…
We performed molecular dynamics simulations to study equilibrium and flow properties of a liquid in a nano-channel with confining surfaces coated with a layer of grafted semiflexible polymers. The coverage spans a wide range of grafting densities from essentially isolated chains to dense brushes. The end-grafted polymers were described by a bead spring model with an harmonic potential to include the bond stiffness of the chains. We varied the rigidity of the chains, from fully flexible polymers to rigid rods, in which the configurational entropy of the chains is negligible. The brush-liquid in…
The role of the topology and its relation with the geometry of biopolymers under different physical conditions is a nontrivial and interesting problem. Aiming at understanding this issue for a related simpler system, we use Monte Carlo methods to investigate the interplay between writhe and knotting of ring polymers in good and poor solvents. The model that we consider is interacting self-avoiding polygons on the simple cubic lattice. For polygons with fixed knot type we find a writhe distribution whose average depends on the knot type but is insensitive to the length $N$ of the polygon and to…
The flow behavior of a semiflexible polymer in microchannels is studied using Multiparticle Collision Dynamics (MPC), a particle-based hydrodynamic simulation technique. Conformations, distributions, and radial cross-streamline migration are investigated for various bending rigidities, with persistence lengths Lp in the range 0.5 < Lp/Lr < 30. The flow behavior is governed by the competition between a hydrodynamic lift force and steric wall-repulsion, which lead to migration away from the wall, and a locally varying flow-induced orientation, which drives polymer away from the channel center an…
The importance of nonlinearities in material constitutive relations has long been appreciated in the continuum mechanics of macroscopic rods. Although the moment (torque) response to bending is almost universally linear for small deflection angles, many rod systems exhibit a high-curvature softening. The signature behavior of these rod systems is a kinking transition in which the bending is localized. Recent DNA cyclization experiments by Cloutier and Widom have offered evidence that the linear-elastic bending theory fails to describe the high-curvature mechanics of DNA. Motivated by this rece…
We investigate diffusion-limited reactions between a diffusing particle and a target site on a semiflexible polymer, a key factor determining the kinetics of DNA-protein binding and polymerization of cytoskeletal filaments. Our theory focuses on two competing effects: polymer shape fluctuations, which speed up association, and the hydrodynamic coupling between the diffusing particle and the chain, which slows down association. Polymer bending fluctuations are described using a mean field dynamical theory, while the hydrodynamic coupling between polymer and particle is incorporated through a si…
Twist stiffness and an asymmetric bending stiffness of a polymer or a polymer bundle is captured by the elastic ribbon model. We investigate the effects a ring geometry induces to a thermally fluctuating ribbon, finding bend-bend coupling in addition to twist-bend coupling. Furthermore, due to the geometric constraint the polymer's effective bending stiffness increases. A new parameter for experimental investigations of polymer bundles is proposed: the mean square diameter of a ribbonlike ring, which is determined analytically in the semiflexible limit. Monte Carlo simulations are performed wh…
Using a mapping of compact polymers on the Manhattan lattice to spanning trees, we calculate exactly the average number of bends at infinite temperature. We then find, in a high temperature approximation, the energy of the system as a function of bending rigidity and polymer elasticity. We identify the universal mechanism for the relaxation of compact polymers and then endow the model with physically motivated dynamics in the convenient framework of the trees. We find aging and domain coarsening after quenches in temperature. We explain the slow dynamics in terms of the geometrical interconnec…
It has become clear in recent years that the simple uniform wormlike chain model needs to be modified in order to account for more complex behavior which has been observed experimentally in some important biopolymers. For example, the large flexibility of short ds-DNA has been attributed to kink or hinge defects. In this paper, we calculate analytically, within the weak bending approximation, the force-extension relation of a wormlike chain with a permanent hinge defect along its contour. The defect is characterized by its bending energy (which can be zero, in the completely flexible case) and…
We extend recent studies of the minimal energy packings of short flexible polymers with hard-core-like repulsions and short-range attractions to include bond-angle interactions with the aim of describing the collapsed conformations of `colloidal' polymers. We find that flexible tangent sticky-hard-sphere (t-SHS) packings provide a useful perturbative basis for analyzing polymer packings with nonzero bending stiffness only for {\it small} ratios of the stiffnesses for the bond-angle ($k_b$) and pair ($k_c$) interactions, i.e. $k_b^{\rm crit}/k_c \lesssim 0.01$ for $N<10$ monomers, and the criti…
We present a study of the bend angle distribution of semiflexible polymers of short and intermediate lengths within the wormlike chain model. This enables us to calculate the elastic response of a stiff molecule to a bending moment. Our results go beyond the Hookean regime and explore the nonlinear elastic behaviour of a single molecule. We present analytical formulae for the bend angle distribution and for the moment-angle relation. Our analytical study is compared against numerical Monte Carlo simulations. The functional forms derived here can be applied to fluorescence microscopic studies o…
Nematic polymer networks (NPNs) are nematic elastomers within which the nematic director is enslaved to the elastic deformation. The elastic free energy of a NPN sheet of thickness $h$ has both stretching and bending components (the former scaling like h, the latter scaling like $h^3$). NPN sheets bear a director field $\mathbf{m}$ imprinted in them (usually, uniformly throughout their thickness); they can be activated by changing the nematic order (e.g. by illumination or heating). This paper illustrates an attempt to compute the bending energy of a NPN sheet and to show which role it can pla…
We study the scaling limit of a fully packed loop model in two dimensions, where the loops are endowed with a bending rigidity. The scaling limit is described by a three-parameter family of conformal field theories, which we characterize via its Coulomb-gas representation. One choice for two of the three parameters reproduces the critical line of the exactly solvable six-vertex model, while another corresponds to the Flory model of polymer melting. Exact central charge and critical exponents are calculated for polymer melting in two dimensions. Contrary to predictions from mean-field theory we…
Entanglement statistics of polymers in a lattice tube and unknotting of 4-plats
University of Melbourne（墨尔本大学）；Hiroshima University（广岛大学）；Capilano University（卡皮拉诺大学）；University of Saskatchewan（萨斯喀彻温大学）；Sask Polytech（萨斯卡通理工大学）；University of California Davis（加州大学戴维斯分校）；Ochanomizu University（御茶水女子大学）
We construct a three-dimensional lattice model for biological gels in which straight lines of bonds correspond to filamentous semi-flexible polymers and lattice sites, which are exactly four-fold coordinated, to crosslinks. With only stretching central forces between nearest neighbors, this lattice is sub-isostatic with an extensive number of zero modes; but all of its elastic constants are nonzero, and its elastic response is affine. Removal of bonds with probability $1-p$ leads to a lattice with average coordination number less than four and a distribution of polymer lengths. When bending fo…
We investigate the influence of a non-ionic surfactant like polymer on phospholipid vesicles. Our results from cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), small angle neutron and X-ray scattering (SANS/SAXS), identifies the existence of multilayer vesicles and an increase in size of the vesicles in presence of the polymers. We present a generalized model to obtain the bending rigidity from neutron spin echo spectroscopy (NSE) data for multilayer vesicles. We demonstrated that polymers are trapped in the lipid bilayer, causing a partial disruption in t…
Minimizing the elastic free energy of a thin sheet of nematic polymer network among smooth isometric immersions is the strategy purported by the mainstream theory. In this paper, we broaden the class of admissible spontaneous deformations: we consider ridged isometric immersions, which can cause a sharp ridge in the immersed surfaces. We propose a model to compute the extra energy distributed along such ridges. This energy comes from bending; it is shown under what circumstances it scales quadratically with the sheet's thickness, falling just in between stretching and bending energies. We put …
