This article presents a review of the finite element method (FEM) model based on the $H$ formulation of Maxwell's equations used to calculate AC losses in high temperature superconductor (HTS) tapes, cables and windings for different applications. This model, which uses the components of the magnetic field as state variables, has been gaining a great popularity and has been in use in tens of research groups around the world. This contribution first reviews the equations on which the model is based and their implementation in finite element method programs for different cases, such 2D longitudinal and axis-symmetric geometries, 3D geometries. Modeling strategies to tackle large number of HTS tapes, such as multi-scale and homogenization methods, are also introduced. Then, the second part of the article reviews the applications for which the $H$ formulations has been used to calculate AC losses, ranging from individual tapes, to complex cables and large magnet windings. Afterwards, a section is dedicated to the discussion of the $H$ formulation in terms of computational efficiency and easiness of implementation. Its pros and cons are listed. Finally, the last section draws the main conclusions.
Numerical models based on the finite-element method (FEM) are popular tools for investigating the macroscopic electromagnetic behavior of high-temperature superconductor (HTS) applications. This article explains how to use the $T$-$A$ formulation for modeling HTS coils in 2D with different coupling scenarios between the turns. First we consider a racetrack coil wound from one piece of superconducting tape. Then we consider a coil obtained by winding a cable composed of different HTS tapes. In the latter case, the tape turns are either electrically connected along their entire length or just at…
The estimation of losses in high-temperature superconductors (HTS) is fundamental during the design of superconducting devices since losses can strongly influence the cooling system requirements and operating temperature. Typically, 2D finite element analysis is used to calculate AC losses in HTS, due to the lack of analytical solutions that can accurately represent complex operating conditions such as AC transport current and AC external applied magnetic field in coils. These 2D models are usually a representation of an infinitely long arrangement. Therefore, they cannot be used to analyze en…
Modelling high temperature superconductor (HTS) motors remains challenging mainly due to the high aspect ratio of these conductors but also because of the properties of the magnetic materials. This paper presents a 2D time dependent model to assess the AC losses of superconducting motors based on the new T-A formulation, which by using Finite Element Methods (FEM), allows its implementation in commercial software. The T-A formulation computes the magnetic flux density with different Maxwell's equations depending on the areas of the motor and makes it possible to use the thin strip approximatio…
This study presents an HTS electromagnetic model combining the thin-strip, homogeneous and multi-scale methods using T-A formulation. In particular, we build the thin strips as both the analyzed HTS tapes and the boundaries of the homogeneous bulks where the non-analyzed tapes are merged. Thus, the coil geometry is re-constructed with several bulks, but the bulks boundaries and domains are tackled with different electromagnetic properties, and solved by T and A formulations, respectively. Firstly, we introduce the modeling process and highlight the differences and advantages over the previous …
This paper presents the alternating current (AC) loss analysis on high-temperature superconductor (HTS) Cross-Conductor (CroCo) cables, in order to evaluate whether they could be utilized for electrical power transmission. The modeling of HTS CroCo cables was based on a cable assembled at the Karlsruhe Institute of Technology (KIT) and the AC loss calculation was based on the H-formulation model implemented in the finite-element method (FEM) software package COMSOL Multiphysics. The AC loss calculations have been carried out for isolated single-phase CroCo cable and three-phase CroCo cables. T…
This review article is a commemoration of the 30th anniversary of the discovery of YBa2Cu3O7-delta high-temperature superconductors (HTSCs). As a result of this discovery a family of (RE)Ba2Cu3O7-delta (RE stands for "rare earth") HTSCs has found great practical use. The review article consists of a brief history of how YBa2Cu3O7-delta was conceived and five sections describing the family of compounds: crystallography, phase diagrams, manufacturing techniques, main superconducting properties, and fields of application.
T-E formulation-based modeling of thin HTS shell magnetization
Blaustein Inst. for Desert Research, Ben-Gurion University of the Negev（布拉斯泰因沙漠研究所，内盖夫本-古里安大学）；Physics Department, Ben-Gurion University of the Negev（物理系，内盖夫本-古里安大学）
Numerical modeling of superconductors is widely recognized as a powerful tool for interpreting experimental results, understanding physical mechanisms and predicting the performance of high-temperature superconductor (HTS) tapes, wires and devices. This is especially true for ac loss calculation, since a sufficiently low ac loss value is imperative to make these materials attractive for commercialization. In recent years, a large variety of numerical models, based on different techniques and implementations, have been proposed by researchers around the world, with the purpose of being able to …
The modeling and analysis of superconducting coils is an essential task in the design stage of most devices based on high-temperature superconductors (HTS). These calculations allow verifying basic estimations and assumptions, proposing improvements, and computing quantities that are not easy to calculate with an analytical approach. For instance, the estimation of losses in HTS is fundamental during the design stage since losses can strongly influence the cooling system requirements and operating temperature. Typically, 2D finite element analysis is used to calculate AC losses in HTS, due to …
Numerical models are powerful tools to predict the electromagnetic behavior of superconductors. In recent years, a variety of models have been successfully developed to simulate high-temperature-superconducting (HTS) coated conductor tapes. While the models work well for the simulation of individual tapes or relatively small assemblies, their direct applicability to devices involving hundreds or thousands of tapes, as for example coils used in electrical machines, is questionable. Indeed the simulation time and memory requirement can quickly become prohibitive. In this article, we develop and …
High temperature superconducting (HTS) bulks can be magnetized to become powerful trapped field magnets (TFMs), which are promising for high-performance electrical applications. To magnetize such TFMs, pulsed field magnetization (PFM) is supposed to substitute field cooling (FC) to provide in situ magnetization. However, the heat generation during PFM, which reduces the trapped field has always been an issue, so numerical simulation of the process is important to provide optimal magnetization strategies. In this paper, HTS bulks magnetized by PFM are simulated with an axisymmetric electromagne…
We make progress towards a 3D finite-element model for the magnetization of a high temperature superconductor (HTS): We suggest a method that takes into account demagnetisation effects and flux creep, while it neglects the effects associated with currents that are not perpendicular to the local magnetic induction. We consider samples that are subjected to a uniform magnetic field varying linearly with time. Their magnetization is calculated by means of a weak formulation in the magnetostatic approximation of the Maxwell equations (A-phi formulation). An implicit method is used for the temporal…
Minimization of ac losses is essential for economic operation of high-temperature superconductor (HTS) ac power cables. A favorable configuration for the phase conductor of such cables has two counter-wound layers of HTS tape-shaped wires lying next to each other and helically wound around a flexible cylindrical former. However, if magnetic materials such as magnetic substrates of the tapes lie between the two layers, or if the winding pitch angles are not opposite and essentially equal in magnitude to each other, current distributes unequally between the two layers. Then, if at some point in …
In the last 10-15 years, the most common strategy in the development of High Temperature Superconducting (HTS) cable for magnets has been to imitate Low Temperature Superconducting (LTS) cable designs. However, requirements for LTS materials are not valid for HTS materials, which are extremely stable. For example, non-twisted multifilamentary Bi-2223 tapes have been successfully used in several magnets. This paper review stability and analyse inductance and AC losses in non-twisted stack of HTS tapes. Numerical calculations show that twisting has negligible effect on inductance variations in a…
A backward computation method has been developed to accelerate modelling of the critical state magnetization current in a staggered-array bulk high-temperature superconducting (HTS) undulator. The key concept is as follows: i) a large magnetization current is first generated on the surface of the HTS bulks after rapid field-cooling (FC) magnetization; ii) the magnetization current then relaxes inwards step-by-step obeying the critical state model; iii) after tens of backward iterations the magnetization current reaches a steady state. The simulation results show excellent agreement with the H-…
High temperature superconductor (HTS) (RE)Ba2Cu3Ox (REBCO) conductor on round core cable (CORC) has high current carrying capacity for high field magnet and power applications. In REBCO CORC cables, current redistribution occurs among tapes through terminal contact resistances when a local quench occurs. Therefore, the quench behaviour of CORC cable is different from single tape situation, for it is significantly affected by terminal contact resistances. To better understand the underlying physical process of local quenches in CORC cables, a new 3D multi-physics modelling tool for CORC cables …
We address the problem of modeling termination resistances which are largely responsible for the uneven distribution of currents in superconducting cables. For such purpose we present three DC models. In a first model a 0D circuit-like approach considering a continuous E-J relationship is presented. A second model uses the 2D H-Formulation of Maxwell's equations, with a new contribution to the electric field term that takes into account the voltage drop due to termination resistances. A third model, based on the 3D H-Formulation of Maxwell's equations, uses a novel technique to simulate both t…
