接触稳定参数化力反馈浮基系统的冲击控制
Jerk Control of Floating Base Systems with Contact-Stable Parametrised Force Feedback
摘要:
与环境接触的浮基系统的非线性控制器通常被构造为二次规划(QP)优化问题。这种基于QP的控制器的共同缺点是:控制输入经常经历不连续性;没有考虑安装在机器人上的力/扭矩(FT)传感器的力反馈。本文试图解决这些限制使用加加速度控制架构。所提出的控制器假设的变化率的关节扭矩作为控制输入,并利用系统的位置,速度,加速度和接触扳手作为可测量的量。所提出的方法的关键成分是一个一对一的自由变量之间的对应关系和接触稳定性约束所定义的流形的内部近似。更准确地说,所提出的对应关系完全涵盖了接触稳定性流形,除了所谓的摩擦锥,其中存在一个独特的对应超过90%的元素。对应关系使我们能够将潜在的约束优化问题转化为无约束的问题。然后,我们提出了一个加加速度控制框架,利用建议的对应关系,并使用FT测量的控制回路。此外,我们提出了李雅普诺夫稳定控制器的系统动量的加加控制框架。仿真和实验使用iCub人形机器人的方法进行了验证。
英文摘要:
Nonlinear controllers for floating base systems in contact with the environment are often framed as quadratic programming (QP) optimization problems. Common drawbacks of such QP based controllers are: the control input often experiences discontinuities; no force feedback from Force/Torque (FT) sensors installed on the robot is taken into account. This paper attempts to address these limitations using jerk based control architectures. The proposed controllers assume the rate-of-change of the joint torques as control input, and exploit the system position, velocity, accelerations, and contact wrenches as measurable quantities. The key ingredient of the presented approach is a one-to-one correspondence between free variables and an inner approximation of the manifold defined by the contact stability constraints. More precisely, the proposed correspondence covers completely the contact stability manifold except for the so-called friction cone, for which there exists a unique correspondence for more than 90% of its elements. The correspondence allows us to transform the underlying constrained optimisation problem into one that is unconstrained. Then, we propose a jerk control framework that exploits the proposed correspondence and uses FT measurements in the control loop. Furthermore, we present Lyapunov stable controllers for the system momentum in the jerk control framework. The approach is validated with simulations and experiments using the iCub humanoid robot.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。