CoFe2O4/CoFe2纳米粉体的研究
Study of CoFe2O4/CoFe2 nanostructured powder
摘要:
我们报告了CoFe 2 O 4/CoFe 2纳米复合材料的实验研究,CoFe 2 O 4/CoFe 2纳米复合材料是由硬磁材料(CoFe 2 O 4)和软磁材料(CoFe 2)形成的纳米结构材料。前驱体材料,钴铁氧体(CoFe 2 O 4),使用传统的化学计量凝胶燃烧法制备。纳米复合材料通过分别在800和900 ℃下在空气和氩气气氛中使用活性炭作为还原剂部分还原前体材料而获得。磁滞回线表明,在一般情况下,制备的纳米复合材料样品显示单一的磁性行为,表明软,硬磁相之间的交换耦合。然而,对于在较高温度下制备的纳米复合材料样品,磁滞测量显示典型的两相磁行为的步骤,这表明存在两个非耦合的磁相。所研究的纳米复合材料呈现出约0.7 kOe的矫顽力(HC),这大大低于钴铁氧体的预期值。高能球磨处理后,纳米复合材料的HC(>440%)和最大能量积(约240%)得到了巨大的增加。
英文摘要:
We report an experimental study of the CoFe2O4/CoFe2 nanocomposite, a nanostructured material formed by hard (CoFe2O4) and soft (CoFe2) magnetic materials. The precursor material, cobalt ferrite (CoFe2O4), was prepared using the conventional stoichiometric gel-combustion method. The nanocomposite material was obtained by reducing partially the precursor material using activated charcoal as reducing agent in air and argon atmospheres, at 800 and 900 C respectively. The magnetic hysteresis loops demonstrate that, in general, prepared nanocomposite samples display single magnetic behavior, indicating exchange coupling between the soft and hard magnetic phases. However, for nanocomposite samples prepared at higher temperatures, the hysteresis measurements show steps typical of two-phase magnetic behavior, suggesting the existence of two non-coupled magnetic phases. The studied nanocomposites presented coercivity (HC) of about 0.7 kOe, which is considerably lower than the expected value for cobalt ferrite. A huge increase in HC (>440%) and maximum energy product (about 240%) was obtained for the nanocomposite after high energy milling processing.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。