Imperfect measurement can degrade a quantum error correction scheme. A solution that restores fault tolerance is to add redundancy to the process of syndrome extraction. In this work, we show how to optimize this process for an arbitrary ratio of data qubit error probability to measurement error probability. The key is to design the measurements so that syndromes that correspond to different errors are separated by the maximum distance in the signal space, in close analogy to classical error correction codes. We find that the mathematical theory of 2-designs, appropriately modified, is the right tool for this. Analytical and simulation results for the bit-flip code, the 5-qubit code, and the Steane code are presented. The results show that design-based redundancy protocols show improvement in both cost and performance relative to conventional fault-tolerant error-correction schemes in situations, quite important in practice, where measure errors are common. In the near term, the construction of a fault-tolerant logical qubit with a small number of noisy physical qubits will benefit from targeted redundancy in syndrome extraction.
To perform achieve fault-tolerant quantum computation, one can use flagged syndrome extraction with fewer ancilla qubits. However, it suffers from long circuit depth if one stabilizer is measured at a time. Previously, Reichardt showed that it is possible to measure multiple stabilizers with at most one shared flag qubit for certain small quantum codes. In this paper, we propose a procedure for general Calderbank-Shor-Steane codes of distance three so that multiple $Z$-stabilizers ($X$-stabilizers) can be fault-tolerantly measured in parallel with one shared flag qubit. We simulate the memory …
To build a fault-tolerant quantum computer, it is necessary to implement a quantum error correcting code. Such codes rely on the ability to extract information about the quantum error syndrome while not destroying the quantum information encoded in the system. Stabilizer codes are attractive solutions to this problem, as they are analogous to classical linear codes, have simple and easily computed encoding networks, and allow efficient syndrome extraction. In these codes, syndrome extraction is performed via multi-qubit stabilizer measurements, which are bit and phase parity checks up to local…
In quantum error correction, information is encoded in a high-dimensional system to protect it from the environment. A crucial step is to use natural, low-weight operations with an ancilla to extract information about errors without causing backaction on the encoded system. Essentially, ancilla errors must not propagate to the encoded system and induce errors beyond those which can be corrected. The current schemes for achieving this fault-tolerance to ancilla errors come at the cost of increased overhead requirements. An efficient way to extract error syndromes in a fault-tolerant manner is b…
In this paper, we formally describe the three challenges of mapping surface code on superconducting devices, and present a comprehensive synthesis framework to overcome these challenges. The proposed framework consists of three optimizations. First, we adopt a geometrical method to allocate data qubits which ensures the existence of shallow syndrome extraction circuit. The proposed data qubit layout optimization reduces the overhead of syndrome extraction and serves as a good initial point for following optimizations. Second, we only use bridge qubits enclosed by data qubits and reduce the num…
We propose a quantum error correction protocol for continuous-variable finite-energy, approximate Gottesman-Kitaev-Preskill (GKP) states undergoing small Gaussian random displacement errors, based on the scheme of Glancy and Knill [Phys. Rev. A {\bf 73}, 012325 (2006)]. We show that combining multiple rounds of error-syndrome extraction with Bayesian estimation offers enhanced protection of GKP-encoded qubits over comparible single-round approaches. Furthermore, we show that the expected total displacement error incurred in multiple rounds of error followed by syndrome extraction is bounded by…
Quantum error correction is necessary to protect logical quantum states and operations. However, no meaningful data protection can be made when the syndrome extraction is erroneous due to faulty measurement gates. Quantum data-syndrome (DS) codes are designed to protect the data qubits and syndrome bits concurrently. In this paper, we propose an efficient decoding algorithm for quantum DS codes with sparse check matrices. Based on a refined belief propagation (BP) decoding for stabilizer codes, we propose a DS-BP algorithm to handle the quaternary quantum data errors and binary syndrome bit er…
Fault-tolerant quantum error correction requires the measurement of error syndromes in a way that minimizes correlated errors on the quantum data. Steane and Shor ancilla are two well-known methods for fault-tolerant syndrome extraction. In this paper, we find a unifying construction that generates a family of ancilla blocks that interpolate between Shor and Steane. This family increases the complexity of ancilla construction in exchange for reducing the rounds of measurement required to fault-tolerantly measure the error. We then apply this construction to the toric code of size $L\times L$ a…
In realistic stabiliser-based quantum error correction there are many ways in which real physical systems deviate from simple toy models of error. Stabiliser measurements may not always be deterministic or may suffer from erasure errors, such that they do not supply syndrome outcomes required for error correction. In this paper, we study the performance of the toric code under a model of probabilistic stabiliser measurement. We find that, even under a completely continuous model of syndrome extraction, the threshold can be maintained at reasonably high values of $1.69\%$ by suitably modifying …
Performing active quantum error correction to protect fragile quantum states highly depends on the correctness of error information--error syndromes. To obtain reliable error syndromes using imperfect physical circuits, we propose the idea of quantum data-syndrome (DS) codes that are capable of correcting both data qubits and syndrome bits errors. We study fundamental properties of quantum DS codes, including split weight enumerators, generalized MacWilliams identities, and linear programming bounds. In particular, we derive Singleton and Hamming-type upper bounds on degenerate quantum DS code…
Steane's seven-qubit quantum code is a natural choice for fault-tolerance experiments because it is small and just two extra qubits are enough to correct errors. However, the two-qubit error-correction technique, known as "flagged" syndrome extraction, works slowly, measuring only one syndrome at a time. This is a disadvantage in experiments with high qubit rest error rates. We extend the technique to extract multiple syndromes at once, without needing more qubits. Qubits for different syndromes can flag errors in each other. This gives equally fast and more qubit-efficient alternatives to Ste…
Quantum errors are primarily detected and corrected using the measurement of syndrome information which itself is an unreliable step in practical error correction implementations. Typically, such faulty or noisy syndrome measurements are modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this "soft" or analog information without the conventional discretization step to benefit the i…
Joint Center for Quantum Information and Computer Science, University of Maryland（量子信息与计算机科学联合中心，马里兰大学）；Shanghai Institute for Mathematics and Interdisciplinary Sciences (SIMIS)（上海数学与交叉学科研究院）；Yau Mathematical Sciences Center, Tsinghua University（清华大学丘成桐数学科学中心）
In this work we establish lower bounds on the size of Clifford circuits that measure a family of commuting Pauli operators. Our bounds depend on the interplay between a pair of graphs: the Tanner graph of the set of measured Pauli operators, and the connectivity graph which represents the qubit connections required to implement the circuit. For local-expander quantum codes, which are promising for low-overhead quantum error correction, we prove that any syndrome extraction circuit implemented with local Clifford gates in a 2D square patch of $N$ qubits has depth at least $Ω(n/\sqrt{N})$ where …
Recent work on fault-tolerant quantum computation making use of topological error correction shows great potential, with the 2d surface code possessing a threshold error rate approaching 1% (NJoP 9:199, 2007), (arXiv:0905.0531). However, the 2d surface code requires the use of a complex state distillation procedure to achieve universal quantum computation. The colour code of (PRL 97:180501, 2006) is a related scheme partially solving the problem, providing a means to perform all Clifford group gates transversally. We review the colour code and its error correcting methodology, discussing one a…
We analyze the long time behavior of a quantum computer running a quantum error correction (QEC) code in the presence of a correlated environment. Starting from a Hamiltonian formulation of realistic noise models, and assuming that QEC is indeed possible, we find formal expressions for the probability of a faulty path and the residual decoherence encoded in the reduced density matrix. Systems with non-zero gate times (``long gates'') are included in our analysis by using an upper bound on the noise. In order to introduce the local error probability for a qubit, we assume that propagation of si…
