超弹性材料本构参数反演方法的研究
Development of an inverse identification method for identifying constitutive parameters by metaheuristic optimization algorithm: Application to hyperelastic materials
摘要:
在本研究中,已经开发了一种基于元启发式参数算法的数值方法来识别超弹性模型的本构参数,通过使用有限元模拟和完整的运动场测量。在等双轴拉伸的十字形试件表面上测量了完整的运动学场。通过有限元法对试样进行重构,得到数值运动学场,并与实验结果进行比较。然后通过优化过程修改数值模型中使用的本构参数,使数值运动学场与实验场拟合。成本函数,然后制定为这两个运动场之间的差异的最小化。该优化算法是粒子群优化算法的一种改进,基于著名搜索引擎Google使用的PageRank算法。引言超弹性模型的本构参数一般确定从三个均匀的测试,基本上是单轴拉伸,纯剪切和等双轴拉伸。从大约10年开始,已经开发出一种替代方法[1,2,3,4],只要油田足够异质,就只进行一次异质测试。这是典型的情况下,当多轴载荷施加到一个3分支或4分支十字形试样,这会导致大量的机械状态在试样表面。一般通过双轴度比和应变最大特征值的分布来分析诱导非均匀性。数字图像相关(DIC)技术通常用于检索不同的机械状态诱导,并提供完整的运动场在试样表面,即大量的实验数据进行分析,以确定考虑的行为模型的本构参数。
英文摘要:
In the present study, a numerical method based on a metaheuristic parametric algorithm has been developed to identify the constitutive parameters of hyperelastic models, by using FE simulations and full kinematic field measurements. The full kinematic field is measured at the surface of a cruciform specimen submitted to equibiaxial tension. The sample is reconstructed by FE to obtain the numerical kinematic field to be compared with the experimental one. The constitutive parameters used in the numerical model are then modified through the optimization process, for the numerical kinematic field to fit with the experimental one. The cost function is then formulated as the minimization of the difference between these two kinematic fields. The optimization algorithm is an adaptation of the Particle Swarm Optimization algorithm, based on the PageRank algorithm used by the famous search engine Google. INTRODUCTION The constitutive parameters of hyperelastic models are generally identified from three homogeneous tests, basically the uniaxial tension, the pure shear and the equibiaxial tension. From about 10 years, an alternative methodology has been developed [1, 2, 3, 4], and consists in performing only one heterogeneous test as long as the field is sufficiently heterogeneous. This is tipically the case when a multiaxial loading is applied to a 3 branch or a 4-branch cruciform specimen, which induces a large number of mechanical states at the specimen surface. The induced heterogeneity is generally analysed through the distribution of the biaxiality ratio and the maximal eigen value of the strain. The Digital Image Correlation (DIC) technique is generally used to retrieve the different mechanical states induces, and provides the full kinematic field at the specimen surface, i.e. a large number of experimental data to be analysed to identify the constitutive parameters of the behaviour model considered.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。