arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1906.10210cs.RO
收藏

用于厘米级空中机器人的激光微加工电流体动力推进器

A laser-microfabricated electrohydrodynamic thruster for centimeter-scale aerial robots

University of Washington(华盛顿大学)

Hari Krishna Hari Prasad, Ravi Sankar Vaddi, Yogesh M Chukewad, Elma Dedic, Igor Novosselov, Sawyer B Fuller

摘要:

迄今为止,能够控制飞行的昆虫规模机器人使用扑翼产生升力,但这需要复杂且容易故障的机制。一个更简单的替代方案是电流体动力(EHD)推力,它不需要移动机械部件。在EHD中,电晕放电在两个电极之间的电场中产生离子流;高速离子通过碰撞将其动能转移到中性空气分子,加速气体并产生推力。我们介绍了一种基于355 nm激光微加工的EHD推力器的制造工艺,我们的方法允许在材料选择上有更大的灵活性。我们的四推进器装置尺寸为1.8 x 2.5 cm,由钢制发射器和轻质碳纤维网组成。确定了四推力器中各推力器的电流和推力特性,其结果符合汤森关系。四推力器的质量为37 mg,测得的推力大于其重量(362.6 uN)。该机器人能够在4.6 kV的电压下升空,推力重量比为1.38。

英文摘要:

To date, insect scale robots capable of controlled flight have used flapping wings for generating lift, but this requires a complex and failure-prone mechanism. A simpler alternative is electrohydrodynamic (EHD) thrust, which requires no moving mechanical parts. In EHD, corona discharge generates a flow of ions in an electric field between two electrodes; the high-velocity ions transfer their kinetic energy to neutral air molecules through collisions, accelerating the gas and creating thrust. We introduce a fabrication process for EHD thruster based on 355 nm laser micromachining and our approach allows for greater flexibility in materials selection. Our four-thruster device measures 1.8 x 2.5 cm and is composed of steel emitters and a lightweight carbon fiber mesh. The current and thrust characteristics of each individual thruster of the quad thruster is determined and agrees with Townsend relation. The mass of the quad thruster is 37 mg and the measured thrust is greater than its weight (362.6 uN). The robot is able to lift off at a voltage of 4.6 kV with a thrust to weight ratio of 1.38.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑