arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1906.10102physics.geo-phphysics.app-ph
收藏

用有限体积法研究几何参数和水流特性对交汇处冲淤的影响

The effect of geometry parameters and flow characteristics on erosion and sedimentation in channels junction using finite volume method

Mohammadamin Torabi, Amirmasoud Hamedi, Ebrahim Alamatian, Hamidreza Zahabi

摘要:

河床冲淤及河床形态是河流工程领域中最关键的问题之一。本文提供并使用了有限体积法的FORTRAN代码。该代码能够模拟沉积。在两个渠道的交汇处模拟水流和泥沙。它是应用一个实验模型来评估结果。通过数值模拟,研究了次干渠宽比、交叉角等几何参数以及次干渠流量比、来流佛劳德数等水力条件对床面形态和流态的影响。计算结果表明,当流量比平均达到51%时,床层最大高度增加到32%。研究发现,随着主、次槽佛劳德数比的减小,最大淤积高度减小。在对河道宽度、流速和最终床高变化的评估中,在所有的比值中,都有一定的变化趋势。此外,随着交叉角的增加,沿通道的流速变化减小。流速和地形床变化的模式也是恒定的,在任何研究的角度。

英文摘要:

One of the most critical problems in the river engineering field is scouring, sedimentation and morphology of a river bed. In this paper, a finite volume method FORTRAN code is provided and used. The code is able to model the sedimentation. The flow and sediment were modeled at the interception of the two channels. It is applied an experimental model to evaluate the results. Regarding the numerical model, the effects of geometry parameters such as proportion of secondary channel to main channel width and intersection angle and also hydraulic conditionals like secondary to main channel discharge ratio and inlet flow Froude number were studied on bed topographical and flow pattern. The numerical results show that the maximum height of bed increased to 32 percent as the discharge ratio reaches to 51 percent, on average. It is observed that the maximum height of sedimentation decreases by declining in main channel to secondary channel Froude number ratio. On the assessment of the channel width, velocity and final bed height variations have changed by given trend, in all the ratios. Also, increasing in the intersection angle accompanied by decreasing in flow velocity variations along the channel. The pattern of velocity and topographical bed variations are also constant in any studied angles.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑