用三维HR-EBSD研究压缩Cu微柱中的几何必需位错结构
Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD
摘要:
微柱的机械测试是一个涉及新物理学的领域,因为材料的行为在这个尺度上是不确定的。为了更好地理解它们的变形机制,我们应用三维高角分辨率电子背散射衍射(3D HR-EBSD)来揭示变形单晶铜微柱中的位错分布。通过聚焦离子束(FIB)制备相同的微柱(尺寸为6 μ m × 6 μ m × 18 μ m),并在室温下压缩。在不同的应变水平(~ 1%,4%和10%)下停止变形过程,以研究几何必需位错(GNDs)的演变。在(100)侧使用FIB和连续HR-EBSD映射的连续切片来创建和比较变形体积的三维图。计算每个变形步骤的平均GND密度。在$4\%$柱上进行基于X射线同步加速器测量的总位错密度计算,以比较由两种互补方法确定的位错密度。在10%柱上捕获扫描透射电子显微镜(STEM)和透射电子显微镜(TEM)图像以可视化实际位错结构。利用三维HR-EBSD技术研究了微柱体变形过程中几何必需位错的演化。在所研究的样品尺寸处发现了介于本体和纳米级塑性之间的中间行为:在变形时建立了发育良好的位错胞结构,但GND密度显著低于本体。这解释了在此尺度下同时观察到的加工硬化和尺寸效应。
英文摘要:
Mechanical testing of micropillars is a field that involves new physics, as the behaviour of materials is non-deterministic at this scale. To better understand their deformation mechanisms we applied 3-dimensional high angular resolution electron backscatter diffraction (3D HR-EBSD) to reveal the dislocation distribution in deformed single crystal copper micropillars. Identical micropillars (6 um x 6 um x 18 um in size) were fabricated by focused ion beam (FIB) and compressed at room temperature. The deformation process was stopped at different strain levels (~1%, 4% and 10%) to study the evolution of geometrically necessary dislocations (GNDs). Serial slicing with FIB and consecutive HR-EBSD mapping on the (100) side was used to create and compare 3-dimensional maps of the deformed volumes. Average GND densities were calculated for each deformation step. Total dislocation density calculation based on X-ray synchrotron measurements were conducted on the $4\%$ pillar to compare dislocation densities determined by the two complementary methods. Scanning transmission electron microscopy (STEM) and transmission electron microscopy (TEM) images were captured on the 10% pillar to visualize the actual dislocation structure. With the 3D HR-EBSD technique we have studied the geometrically necessary dislocations evolving during the deformation of micropillars. An intermediate behaviour was found at the studied sample size between bulk and nanoscale plasticity: A well-developed dislocation cell structure built up upon deformation but with significantly lower GND density than in bulk. This explains the simultaneous observation of strain hardening and size effect at this scale.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。