arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1906.00338physics.app-ph
收藏

用于超高存储密度磁介质的石墨烯涂层

Graphene Overcoats for Ultra-High Storage Density Magnetic Media

N. Dwivedi, A. K. Ott, K. Sasikumar, C. Dou, R. J. Yeo, B. Narayanan, U. Sassi, D. De Fazio, G. Soavi, T. Dutta, S. K. R. S. Sankaranarayanan, A. C. Ferrari, C. S. Bhatia

摘要:

硬盘驱动器(HDD)由于成本低(2016年价格为$<$ 0.1\$/GB)和大数据存储容量(3.5英寸HDD为10 TB)而被用作许多数字电子设备中的辅助存储。由于数据量呈指数增长,需要将面存储密度增加到超过$\sim$ 1 Tb/in $^2$。这要求碳外涂层(COC)的厚度为$<$ 2 nm。摩擦、磨损、腐蚀和热稳定性是$<$ 2 nm的关键问题,其中当前COC的大部分保护性能都丧失了。这限制了当前的技术并限制了COC与热辅助磁纪录技术(HAMR)的集成,因为这也需要激光照射稳定性。在这里,我们表明石墨烯基涂层可以克服所有这些限制。2-4石墨烯层能够使摩擦减少两倍,并提供比最先进的COC更好的腐蚀和磨损。单个石墨烯层足以将腐蚀降低$\sim$ 2.5倍。我们还表明,石墨烯可以承受HAMR条件。因此,基于石墨烯的外涂层可以实现面密度HDD $>$ 10 Tb/in $^2$。

英文摘要:

Hard disk drives (HDDs) are used as secondary storage in a number of digital electronic devices owing to low cost ($<$0.1\$/GB at 2016 prices) and large data storage capacity (10TB with a 3.5 inch HDD). Due to the exponentially increasing amount of data, there is a need to increase areal storage densities beyond$\sim$1Tb/in$^2$. This requires the thickness of carbon overcoats (COCs) to be$<$2nm. Friction, wear, corrosion, and thermal stability are critical concerns$<$2nm, where most of the protective properties of current COCs are lost. This limits current technology and restricts COC integration with heat assisted magnetic recording technology (HAMR), since this also requires laser irradiation stability. Here we show that graphene-based overcoats can overcome all these limitations. 2-4 layers of graphene enable two-fold reduction in friction and provide better corrosion and wear than state-of-the-art COCs. A single graphene layer is enough to reduce corrosion$\sim$2.5 times. We also show that graphene can withstand HAMR conditions. Thus, graphene-based overcoats can enable ultrahigh areal density HDDs$>$10Tb/in$^2$.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑