arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1905.05271cond-mat.soft
收藏

充液弹性管内圆柱的受迫运动

Forced motion of a cylinder within a liquid-filled elastic tube

Amit Vurgaft, Shai B. Elbaz, Amir D. Gat

摘要:

本文分析了弹性充液管内刚性圆柱受迫轴向运动所产生的粘性流动和弹性形变。所检查的配置与将细长器械插入充满液体的生物血管中的各种微创医疗手术相关,例如经皮血运重建术、介入放射学、内窥镜检查和导管插入术。通过应用润滑近似,薄壳弹性模型,以及缩放分析和定期和奇异的渐近方案,该问题被检查为小和大的变形限制(相对于缸和管之间的间隙)。在大变形的极限,强制插入的气缸被证明涉及三个不同的制度和时间尺度:(i)初始剪切占主导地位的制度,(ii)中间制度的主导流体压力和传播粘性剥离前,(iii)后期准稳态流制度的完全剥离管。一个统一的解决方案,为所有制度的突然施加恒定的力,显示初始减速,然后加速度的插入气缸。对于从管中强制抽出圆柱体的情况,负表压减小圆柱体和管之间的间隙,增加粘性阻力或由于管和圆柱体的接触而产生摩擦。匹配的渐近方案被用来计算近接触和接触极限的动力学。我们发现,圆柱退出管在有限的时间足够小或大的力量。然而,对于中等范围的力,径向接触产生圆筒在管内的稳定锁定。

英文摘要:

This work analyzes the viscous flow and elastic deformation created by the forced axial motion of a rigid cylinder within an elastic liquid-filled tube. The examined configuration is relevant to various minimally invasive medical procedures in which slender devices are inserted into fluid-filled biological vessels, such as percutaneous revascularization, interventional radiology, endoscopies and catheterization. By applying the lubrication approximation, thin shell elastic model, as well as scaling analysis and regular and singular asymptotic schemes, the problem is examined for small and large deformation limits (relative to the gap between the cylinder and the tube). At the limit of large deformations, forced insertion of the cylinder is shown to involve three distinct regimes and time-scales: (i) initial shear dominant regime, (ii) intermediate regime of dominant fluidic pressure and a propagating viscous-peeling front, (iii) late-time quasi-steady flow regime of the fully peeled tube. A uniform solution for all regimes is presented for a suddenly applied constant force, showing initial deceleration and then acceleration of the inserted cylinder. For the case of forced extraction of the cylinder from the tube, the negative gauge pressure reduces the gap between the cylinder and the tube, increasing viscous resistance or creating friction due to contact of the tube and cylinder. Matched asymptotic schemes are used to calculate the dynamics of the near-contact and contact limits. We find that the cylinder exits the tube in a finite time for sufficiently small or large forces. However, for an intermediate range of forces the radial contact creates a steady locking of the cylinder inside the tube.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑