Testing scenario library generation (TSLG) is a critical step for the development and deployment of connected and automated vehicles (CAVs). In Part I of this study, a general methodology for TSLG is proposed, and theoretical properties are investigated regarding the accuracy and efficiency of CAV evaluation. This paper aims to provide implementation examples and guidelines, and to enhance the proposed methodology under high-dimensional scenarios. Three typical cases, including cut-in, highway-exit, and car-following, are designed and studied in this paper. For each case, the process of library generation and CAV evaluation is elaborated. To address the challenges brought by high dimensions, the proposed methodology is further enhanced by reinforcement learning technique. For all three cases, results show that the proposed methods can accelerate the CAV evaluation process by multiple magnitudes with same evaluation accuracy, if compared with the on-road test method.
Automated vehicles are deemed to be the key element for the intelligent transportation system in the future. Many studies have been made to improve the Automated vehicles' ability of environment recognition and vehicle control, while the attention paid to decision making is not enough though the decision algorithms so far are very preliminary. Therefore, a framework of the decision-making training and learning is put forward in this paper. It consists of two parts: the deep reinforcement learning training program and the high-fidelity virtual simulation environment. Then the basic microscopic …
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
Today's automated vehicles lack the ability to cooperate implicitly with others. This work presents a Monte Carlo Tree Search (MCTS) based approach for decentralized cooperative planning using macro-actions for automated vehicles in heterogeneous environments. Based on cooperative modeling of other agents and Decoupled-UCT (a variant of MCTS), the algorithm evaluates the state-action-values of each agent in a cooperative and decentralized manner, explicitly modeling the interdependence of actions between traffic participants. Macro-actions allow for temporal extension over multiple time steps …
Department of Philosophy, UMass Lowell（马萨诸塞大学洛厄尔分校哲学系）
Stop-and-go traffic poses many challenges to tranportation system, but its formation and mechanism are still under exploration.however, it has been proved that by introducing Connected Automated Vehicles(CAVs) with carefully designed controllers one could dampen the stop-and-go waves in the vehicle fleet. Instead of using analytical model, this study adopts reinforcement learning to control the behavior of CAV and put a single CAV at the 2nd position of a vehicle fleet with the purpose to dampen the speed oscillation from the fleet leader and help following human drivers adopt more smooth driv…
This paper describes Fields2Cover, a novel open source library for coverage path planning (CPP) for agricultural vehicles. While there are several CPP solutions nowadays, there have been limited efforts to unify them into an open source library and provide benchmarking tools to compare their performance. Fields2Cover provides a framework for planning coverage paths, developing novel techniques, and benchmarking state-of-the-art algorithms. The library features a modular and extensible architecture that supports various vehicles and can be used for a variety of applications, including farms. It…
Technische Universität Braunschweig（布伦瑞克工业大学）；Institute of Control Engineering（控制工程研究所）
The introduction of automated vehicles without permanent human supervision demands a functional system description, including functional system boundaries and a comprehensive safety analysis. These inputs to the technical development can be identified and analyzed by a scenario-based approach. Furthermore, to establish an economical test and release process, a large number of scenarios must be identified to obtain meaningful test results. Experts are doing well to identify scenarios that are difficult to handle or unlikely to happen. However, experts are unlikely to identify all scenarios poss…
Chalmers University of Technology（查尔姆斯理工大学）；University of Gothenburg（哥德堡大学）；RISE Research Institutes of Sweden（瑞典国家研究院）
The technology in the area of automated vehicles is gaining speed and promises many advantages. However, with the recent introduction of conditionally automated driving, we have also seen accidents. Test protocols for both, conditionally automated (e.g., on highways) and automated vehicles do not exist yet and leave researchers and practitioners with different challenges. For instance, current test procedures do not suffice for fully automated vehicles, which are supposed to be completely in charge for the driving task and have no driver as a back up. This paper presents current challenges of …
University of Applied Science Ruhr West（鲁尔西部应用科学大学）；University of Duisburg-Essen（杜伊斯堡-埃森大学）
Human emotion detection in automated vehicles helps to improve comfort and safety. Research in the automotive domain focuses a lot on sensing drivers' drowsiness and aggression. We present a new form of implicit driver-vehicle cooperation, where emotion detection is integrated into an automated vehicle's decision-making process. Constant evaluation of the driver's reaction to vehicle behavior allows us to revise decisions and helps to increase the safety of future automated vehicles.
Technische Universität Braunschweig（布伦瑞克工业大学）；Institute of Control Engineering at Technische Universität Braunschweig（布伦瑞克工业大学控制工程研究所）
For future application of automated vehicles in public traffic, ensuring functional safety is essential. In this context, a hazard analysis and risk assessment is an important input for designing functionally vehicle automation systems. In this contribution, we present a detailed hazard analysis and risk assessment (HARA) according to the ISO 26262 standard for a specific Level 4 application, namely an unmanned protective vehicle operated without human supervision for motorway hard shoulder roadworks.
Generative Models and Connected and Automated Vehicles: A Survey in Exploring the Intersection of Transportation and AI
School of Engineering Science（工程科学学院）；Shandong Xiehe University（山东谢河大学）；Department of Electrical Engineering（电气工程系）；Northwestern University（西北大学）；Department of Computer Science（计算机科学系）；Pace University（帕克大学）
Are automated vehicles really safer than manually driven vehicles? If so, how would we know? Answering this question has spurred a contentious debate. Unfortunately, several issues make answering this question difficult for the foreseeable future. First, how do we measure safety? Second, how can we keep track of automated vehicle (AV) safety? Finally, how do we determine what is or what is not an AV? Until these questions are addressed, it will continue to be difficult to determine whether or when AVs might really be safer than manually driven vehicles.
Institute of Automotive Technology, Technical University of Munich（慕尼黑工业大学汽车技术研究所）
For the offline safety assessment of automated vehicles, the most challenging and critical scenarios must be identified efficiently. Therefore, we present a new approach to define challenging scenarios based on a sensor setup model of the ego-vehicle. First, a static optimal approaching path of a road user to the ego-vehicle is calculated using an A* algorithm. We consider a poor perception of the road user by the automated vehicle as optimal, because we want to define scenarios that are as critical as possible. The path is then transferred to a dynamic scenario, where the trajectory of the ro…
In parallel with the advancement of Automated Driving (AD) functions, teleoperation has grown in popularity over recent years. By enabling remote operation of automated vehicles, teleoperation can be established as a reliable fallback solution for operational design domain limits and edge cases of AD functions. Over the years, a variety of different teleoperation concepts as to how a human operator can remotely support or substitute an AD function have been proposed in the literature. This paper presents the results of a literature survey on teleoperation concepts for road vehicles. Furthermor…
While automated driving technology has achieved a tremendous progress, the scalable and rigorous testing and verification of safe automated and autonomous driving vehicles remain challenging. This paper proposes a learning-based falsification framework for testing the implementation of an automated or self-driving function in simulation. We assume that the function specification is associated with a violation metric on possible scenarios. Prior knowledge is incorporated to limit the scenario parameter variance and in a model-based falsifier to guide and improve the learning process. For an exe…
Institute of Automotive Technology, Technical University of Munich（慕尼黑工业大学汽车技术研究所）
The objective of this paper is to propose a systematic analysis of the sensor coverage of automated vehicles. Due to an unlimited number of possible traffic situations, a selection of scenarios to be tested must be applied in the safety assessment of automated vehicles. This paper describes how phenomenological sensor models can be used to identify system-specific relevant scenarios. In automated driving, the following sensors are predominantly used: camera, ultrasonic, \radar and \lidarohne. Based on the literature, phenomenological models have been developed for the four sensor types, which …
Autonomy and connectivity are considered among the most promising technologies to improve safety, mobility, fuel and time consumption in transportation systems. Some of the fuel efficiency benefits of connected and automated vehicles (CAVs) can be realized through platooning. A platoon is a virtual train of CAVs that travel together following the platoon head, with small gaps between them. Vehicles may also reduce travel time by lane changing. In this paper, we devise an optimal control-based trajectory planning model that can provide safe and efficient trajectories for the subject vehicle and…
Technische Universität Kaiserslautern（凯泽斯劳滕工业大学）；German Research Center for Artificial Intelligence (DFKI)（德国人工智能研究中心）
Within the context of Industry 4.0, mobile robot systems such as automated guided vehicles (AGVs) and unmanned aerial vehicles (UAVs) are one of the major areas challenging current communication and localization technologies. Due to stringent requirements on latency and reliability, several of the existing solutions are not capable of meeting the performance required by industrial automation applications. Additionally, the disparity in types and applications of unmanned vehicle (UV) calls for more flexible communication technologies in order to address their specific requirements. In this pape…
The main goal of this paper is to introduce the data collection effort at Mcity targeting automated vehicle development. We captured a comprehensive set of data from a set of perception sensors (Lidars, Radars, Cameras) as well as vehicle steering/brake/throttle inputs and an RTK unit. Two in-cabin cameras record the human driver's behaviors for possible future use. The naturalistic driving on selected open roads is recorded at different time of day and weather conditions. We also perform designed choreography data collection inside the Mcity test facility focusing on vehicle to vehicle, and v…
We introduce a prioritized system-optimal algorithm for mandatory lane change (MLC) behavior of connected and automated vehicles (CAV) from a dedicated lane. Our approach applies a cooperative lane change that prioritizes the decisions of lane changing vehicles which are closer to the end of the diverging zone (DZ), and optimizes the predicted total system travel time. Our experiments on synthetic data show that the proposed algorithm improves the traffic network efficiency by attaining higher speeds in the dedicated lane and earlier MLC positions while ensuring a low computational time. Our a…
California Institute of Technology（加州理工学院）；Ford Research and Innovation Center（福特研究与创新中心）；University of Michigan（密歇根大学）
This work gives introduction to traffic control by connected automated vehicles. The influence of vehicle control on vehicular traffic and traffic control strategies are discussed and compared. It is highlighted that vehicle-to-everything connectivity allows connected automated vehicles to access the state of the traffic behind them such that feedback can be utilized to mitigate evolving congestions. Numerical simulations demonstrate that such connectivity-based traffic control is beneficial for smoothness and energy efficiency of highway traffic. The dynamics and stability of traffic flow, un…
The development of safety applications for Connected Automated Vehicles requires testing in many different scenarios. However, the recreation of test scenarios for evaluating safety applications is a very challenging task. This is mainly due to the randomness in communication, difficulty in recreating vehicle movements precisely, and safety concerns for certain scenarios. We propose to develop a standalone Remote Vehicle Emulator that can reproduce V2V messages of remote vehicles from simulations or previous tests. This is expected to accelerate the development cycle significantly. Remote Vehi…
University of California, Berkeley（加州大学伯克利分校）；Hyundai Motor Group（现代汽车集团）
We present a hardware-in-the-loop (HIL) simulation setup for repeatable testing of Connected Automated Vehicles (CAVs) in dynamic, real-world scenarios. Our goal is to test control and planning algorithms and their distributed implementation on the vehicle hardware and, possibly, in the cloud. The HIL setup combines PreScan for perception sensors, road topography, and signalized intersections; Vissim for traffic micro-simulation; ETAS DESK-LABCAR/a dynamometer for vehicle and powertrain dynamics; and on-board electronic control units for CAV real time control. Models of traffic and signalized …
FZI Research Center for Information Technology（FZI 信息技术研究中心）；Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院）
While motion planning techniques for automated vehicles in a reactive and anticipatory manner are already widely presented, approaches to cooperative motion planning are still remaining. In this paper, we present an approach to enhance common motion planning algorithms, that allows for cooperation with human-driven vehicles. Unlike previous approaches, we integrate the prediction of other traffic participants into the motion planning, such that the influence of the ego vehicle's behavior on the other traffic participants can be taken into account. For this purpose, a new cost functional is pre…
Connected and automated vehicles have shown great potential in improving traffic mobility and reducing emissions, especially at unsignalized intersections. Previous research has shown that vehicle passing order is the key influencing factor in improving intersection traffic mobility. In this paper, we propose a graph-based cooperation method to formalize the conflict-free scheduling problem at an unsignalized intersection. Based on graphical analysis, a vehicle's trajectory conflict relationship is modeled as a conflict directed graph and a coexisting undirected graph. Then, two graph-based me…
The transition from today's mostly human-driven traffic to a purely automated one will be a gradual evolution, with the effect that we will likely experience mixed traffic in the near future. Connected and automated vehicles can benefit human-driven ones and the whole traffic system in different ways, for example by improving collision avoidance and reducing traffic waves. Many studies have been carried out to improve intersection management, a significant bottleneck in traffic, with intelligent traffic signals or exclusively automated vehicles. However, the problem of how to improve mixed tra…
University of Michigan（密歇根大学）；University of Tennessee Knoxville（田纳西大学诺克斯维尔分校）
In this paper we propose a novel observer-based method for anomaly detection in connected and automated vehicles (CAVs). The proposed method utilizes an augmented extended Kalman filter (AEKF) to smooth sensor readings of a CAV based on a nonlinear car-following motion model with time delay, where the leading vehicle's trajectory is used by the subject vehicle to detect sensor anomalies. We use the classic $χ^2$ fault detector in conjunction with the proposed AEKF for anomaly detection. To make the proposed model more suitable for real-world applications, we consider a stochastic communication…
Safety is an essential aspect in the facilitation of automated vehicle deployment. Current testing practices are not enough, and going beyond them leads to infeasible testing requirements, such as needing to drive billions of kilometres on public roads. Automated vehicles are exposed to an indefinite number of scenarios. Handling of the most challenging scenarios should be tested, which leads to the question of how such corner cases can be determined. We propose an approach to identify the performance boundary, where these corner cases are located, using Gaussian Process Classification. We als…
Automated Driving Architecture and Operation of a Light Commercial Vehicle
İstanbul Okan University（伊斯坦布尔奥坎大学）；Yıldız Technical University（耶尔德兹技术大学）；TÜBİTAK BİLGEM Cyber Security Institute（土耳其科学技术研究理事会信息科学与安全研究所）；TOFAŞ Research and Development Center（托法什研发中心）；The Ohio State University（俄亥俄州立大学）
With advances in sensing, computing, and communication technologies, Connected and Automated Vehicles (CAVs) are becoming feasible. The advent of CAVs presents new opportunities to improve the energy efficiency of individual vehicles. However, testing and verifying energy-efficient autonomous driving systems are difficult due to safety considerations and repeatability. In this paper, we present a co-simulation platform to develop and test novel vehicle eco-autonomous driving technologies named InfoRich, which incorporates the information from on-board sensors, V2X communications, and map datab…
This paper proposes a methodology to estimate uncertainty in automated vehicle (AV) dynamics in real time via Bayesian inference. Based on the estimated uncertainty, the method aims to continuously monitor the car-following (CF) performance of the AV to support strategic actions to maintain a desired performance. Our methodology consists of three sequential components: (i) the Stochastic Gradient Langevin Dynamics (SGLD) is adopted to estimate parameter uncertainty relative to vehicular dynamics in real time, (ii) dynamic monitoring of car-following stability (local and string-wise), and (iii)…
Modern Middlewares for Automated Vehicles: A Tutorial
Chair of Embedded Software, RWTH Aachen University（嵌入式软件研究所，亚琛RWTH大学）；Department of Aerospace Engineering, University of the Bundeswehr Munich（航空航天工程系，联邦国防军 Munich大学）
A Vehicle-in-the-Loop Simulator with AI-Powered Digital Twins for Testing Automated Driving Controllers
Department of Electrical Engineering, Eindhoven University of Technology（电子工程系，埃因霍温理工大学）；Siemens Digital Industries Software（西门子数字工业软件）；Department of Mechanical Engineering, Eindhoven University of Technology（机械工程系，埃因霍温理工大学）
