arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1904.06733cond-mat.mtrl-sci
收藏

具有调幅拓扑结构的蜂窝材料的力学响应

The mechanical response of cellular materials with spinodal topologies

Meng-Ting Hsieh, Bianca Endo, Yunfei Zhang, Jens Bauer, Lorenzo Valdevit

摘要:

对具有旋节结构的蜂窝材料的力学响应进行了数值和实验研究。通过Cahn-Hilliard方程的数值解产生Spinodal微结构。研究了两种不同的拓扑结构:“固体模型”,其中两相之一被建模为固体材料,其余体积为空隙空间;和“壳模型”,其中两相之间的界面被假设为固体壳,其余体积被建模为空隙空间。在这两种情况下,一个广泛的相对密度和旋节特征尺寸进行了研究。所有数值生成的模型的拓扑结构和形态学的仔细特征,以提取关键的几何特征,并确保曲率的分布和老化规律是符合物理的Spinodal分解。对每个模型进行有限元网格划分,提取单轴抗压刚度和强度。我们表明,虽然在30-70%的密度范围内的固体旋节模型相对低效(即,它们的强度和刚度表现出与相对密度的高次幂比例关系),在0.01-1%的密度范围内的壳旋节线模型是异常坚硬和坚固的。旋节壳材料也被证明是显着的缺陷不敏感。这些研究结果进行了验证实验,通过原位单轴压缩的聚合物样品打印在微尺度上的直接激光写入(DLW)。在较低的相对密度下,壳旋节线模型的强度和刚度优于大多数晶格材料,并接近各向同性蜂窝材料的理论界限。最重要的是,这些材料可以通过自组装技术在一系列长度尺度上生产,提供独特的可扩展性。

英文摘要:

The mechanical response of cellular materials with spinodal topologies is numerically and experimentally investigated. Spinodal microstructures are generated by the numerical solution of the Cahn-Hilliard equation. Two different topologies are investigated: "solid models," where one of the two phases is modeled as a solid material and the remaining volume is void space; and "shell models," where the interface between the two phases is assumed to be a solid shell, with the rest of the volume modeled as void space. In both cases, a wide range of relative densities and spinodal characteristic feature sizes are investigated. The topology and morphology of all the numerically generated models are carefully characterized to extract key geometrical features and ensure that the distribution of curvatures and the aging law are consistent with the physics of spinodal decomposition. Finite element meshes are generated for each model, and the uniaxial compressive stiffness and strength are extracted. We show that while solid spinodal models in the density range of 30-70% are relatively inefficient (i.e., their strength and stiffness exhibit a high-power scaling with relative density), shell spinodal models in the density range of 0.01-1% are exceptionally stiff and strong. Spinodal shell materials are also shown to be remarkably imperfection insensitive. These findings are verified experimentally by in-situ uniaxial compression of polymeric samples printed at the microscale by Direct Laser Writing (DLW). At low relative densities, the strength and stiffness of shell spinodal models outperform those of most lattice materials and approach theoretical bounds for isotropic cellular materials. Most importantly, these materials can be produced by self-assembly techniques over a range of length scales, providing unique scalability.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑