Surface Plasmon Resonance sensors are a well-established class of sensors which includes a very large variety of materials and detection schemes. However, the development of portable devices is still challenging as due to the intrinsic complexity of the optical excitation/detection schemes. In this work we show that Nanoporous gold (NPG) films may overcome these limitations by providing excellent sensitivity without the need of sophisticated fabrication approaches and/or optical setup. The sensing mechanism is related the co-localization of optical energy and analytes into the pores that promote an enhanced light-matter coupling. As result, when molecules are adsorbed into the pores, the NPG film shows a significant spectral shift of the effective plasma frequency and then an abrupt change of the reflectivity. By monitoring the reflectivity in the spectral region close to the plasma frequency (namely the plasma edge) is then possible to detect the analyte. Through a set of experiments we demonstrated a sensitivity exceeding 15.000 nm/RIU in the Near Infrared Range that is comparable with the state of the art of plasmonic metamaterials.
Nanoporous gold can be exploited as plasmonic material for enhanced spectroscopy both in the visible and in the near infrared spectral regions. In particular, with respect to bulk metal it presents interesting optical properties in the infrared where it presents a significantly higher field confinement with respect to conventional materials. This latter can be exploited to achieve extremely high sensitivity to the environment conditions, hence realizing interesting sensors. Here we compare the sensitivity of a plasmonic resonators made of nanoporous gold with a similar structures made of bulk …
A robust and reproducible preparation of self-standing nanoporous gold leaves (NPGL) is presented, with optical characterization and plasmonic behaviour analysis. Nanoporous gold (NPG) layers are tipically prepared as thin films on a bulk substrate. Here we present an alternative approach consisting in the preparation of NPGL in the form of a self-standing film. This solution leads to a perfectly symmetric configuration where the metal is immersed in a homogeneous medium and in addition can support the propagation of symmetric and antisymmetric plasmonic modes. With respect to bulk gold, NPG s…
Plasmonics applications have been extending into the ultraviolet region of the electromagnetic spectrum. Unfortunately the commonly used noble metals have intrinsic optical properties that limit their use above 350 nm. Aluminum is probably the most suitable material for UV plasmonics and in this work we show that nanoporous aluminum can be prepared starting from an alloy of Mg3Al2. The porous metal is obtained by means of a galvanic replacement reaction. Such a nanoporous metal can be exploited to achieve a plasmonic material for enhanced UV Raman spectroscopy and fluorescence. Thanks to the l…
Double anodization of aluminium microwires in an acid bath yields cylindrical nanoporous alumina with nonbranching radially emanating pores. The obtained nanoporous alumina is a cylindrically anisotropic as well as a radially inhomogeneous optical medium. Detailed structural characterization reveals that the nanopore diameter varies linearly with the radius of the aluminium microwire along the radial direction. Microcracks form on the alumina shell during the anodization when sufficient thickness is formed due to volume expansion and stress accumulation. The formation of the microcracks can be…
Whether dispersal of plasmonic nanoparticles (NPs) within a perovskite active layer can increase the efficiency of solar cells is a long-standing question. It is well known that inclusion of metallic NPs in an active layer can boost the surrounding near-field intensity around them owing to the dipolar localized surface plasmon resonance (LSPR, also called antenna effect), which can increase light absorption by solar cells. However, the use of plasmonic NPs in perovskite solar cells has been barely reported, and it is not known whether inserting plasmonic NPs into a perovskite active layer prod…
The interaction of light with subwavelength metallic nano-structures is at the heart of different current scientific hot topics, namely plasmonics, metamaterials and nanoantennas. Research in these disciplines during the last decade has given rise to new, powerful concepts providing an unprecedented degree of control over light manipulation at the nanoscale. However, only recently have these concepts been used to increase the capabilities of light processing in current photonic integrated circuits (PICs), which traditionally rely only on dielectric materials with element sizes larger than the …
Sensing lower molecular weight in a diluted solution using a label-free biosensor is challenging and requires a miniaturized plasmonic structure, e.g., a vertical Au nanorod (AuNR) array based metamaterials. The sensitivity of a sensor mainly depends on transducer properties and hence for instance, the AuNR array geometry requires optimization. Physical vapour deposition methods (e.g., sputtering and e-beam evaporation) require a vacuum environment to deposit Au, which is costly, time-consuming, and thickness-limited. On the other hand, chemical deposition, i.e., electroplating deposit higher …
Second-order nonlinear optics is the base for a large variety of devices aimed at the active manipulation of light. However, physical principles restrict its occurrence to non-centrosymmetric, anisotropic matter. This significantly limits the number of base materials exhibiting nonlinear optics. Here, we show that embedding chromophores in an array of conical channels 13 nm across in monolithic silica results in mesoscopic anisotropic matter and thus in a hybrid material showing second-harmonic generation (SHG). This non-linear optics is compared to the one achieved in corona-poled polymer fil…
The applications of plasmonics to energy transfer from free-space radiation to molecules are currently limited to the visible region of the electromagnetic spectrum due to the intrinsic optical properties of bulk noble metals that support strong electromagnetic field confinement only close to their plasma frequency in the visible/ultraviolet range. In this work, we show that nanoporous gold can be exploited as plasmonic material for the mid-infrared region to obtain strong electromagnetic field confinement, co-localized with target molecules into the nanopores and resonant with their vibration…
Raman spectroscopy is a powerful technique to characterize materials. It probes non-destructively chemical composition, crystallinity, defects, strain and coupling phenomena. However, the Raman response of surfaces or thin films is often weak and obscured by dominant bulk signals. Here we overcome this limitation by placing a transferable porous gold membrane (PAuM) on top of the surface of interest. Slot-like nanopores in the membrane act as plasmonic slot antennas and enhance the Raman response of the surface or thin film underneath. Simultaneously, the PAuM suppresses the penetration of the…
Plasmonic metamaterials can be used to enhance mid-infrared sensors and detectors for immunosensing applications. The major challenge is to integrate these technologies in low-cost, compact, and promising platforms. In this study, as an emerging approach, we utilized toroidal resonant plasmonic metasurfaces to develop an ultrasensitive label-free analytical platform for the detection of specific antibiotics in the mid-IR regime. Taking advantage of unique sensitivity of robustly squeezed electromagnetic fields in toroidal meta-atoms, we validated that our proposed technique based on toroidal m…
We experimentally demonstrate the active control of a plasmonic metamaterial operating in the quantum regime. A two-dimensional metamaterial consisting of unit cells made from gold nanorods is investigated. Using an external laser we control the temperature of the metamaterial and carry out quantum process tomography on single-photon polarization-encoded qubits sent through, characterizing the metamaterial as a variable quantum channel. The overall polarization response can be tuned by up to 33% for particular nanorod dimensions. To explain the results, we develop a theoretical model and find …
In this thesis various plasmonic materials, such as hyperbolic metamaterial nanohole arrays and Au-coated free standing nanoassembly supporting nanopores, are investigated with the aim to perform optical sensing of DNA molecules with Surface-Enhanced Raman Spectroscopy in flow-through configuration.
Engineered electromagnetic fields in plasmonic nanopores enable enhanced optical detection and their use in single molecule sequencing. Here, a plasmonic nanopore prepared in a thick nanoporous film is used to investigate the interaction between the metal and a long-chain double strand DNA molecule. We discuss how the matrix of nanoporous metal can interact with the molecule thanks to: i) transient aspecific interactions between the porous surface and DNA and ii) optical forces exerted by the localized field in a metallic nanostructure. A duration of interaction up to tens of milliseconds enab…
Driven by a myriad of potential applications such as communications, medical imaging, security, spectroscopy, and so on, terahertz (THz) technology has emerged as a rapidly growing technological field during the last three decades. However, since conventional materials typically used in microwave and optical frequencies are lossy or do not effectively respond at these frequencies, it is essential to find or develop novel materials that are suitable for device applications in the THz range. Therefore, there is wide interest in the community in employing novel naturally-occurring materials, such…
We examine the properties of a gaseous plasma resonator generated by focusing a high-energy laser pulse through a lens and into a gas. An analytical model is presented describing the scattering resonance of these near-ellipsoidal plasmas and its dependence on their eccentricity and intrinsic plasma properties. This dependence is investigated through Ku band transmission experiments of a waveguide with an embedded single plasma element and through optical diagnostics of the laser-induced plasma. The described resonator has the potential to be used as the building block in a new class of metamat…
We report the first preparation of nanoporous Al-Mg alloy films by selective dissolution of Mg from a Mg-rich AlxMg1-x alloy. We show how to tune the stoichiometry, the porosity and the oxide contents in the final film by modulating the starting ratio between Al and Mg and the dealloying procedure. The obtained porous metal can be exploited for enhanced UV spectroscopy. In this respect, we experimentally demonstrate its efficacy in enhancing fluorescence and surface Raman scattering for excitation wavelengths of 360 nm and 257 nm respectively. Finally, we numerically show the superior performa…
Complete absorption of electromagnetic waves is paramount in today's applications, ranging from photovoltaics to cross-talk prevention into sensitive devices. In this context, we use a genetic algorithm (GA) strategy to optimize absorption properties of periodic arrays of truncated square-based pyramids made of alternating stacks of metal/dielectric layers. We target ultra-broadband quasi-perfect absorption of normally incident electromagnetic radiations in the visible and near-infrared ranges (wavelength comprised between 420 and 1600 nm). We compare the results one can obtain by considering …
Metamaterials have recently established a new paradigm for enhanced light absorption in state-of-the-art photodetectors. Here, we demonstrate broadband, highly efficient, polarization-insensitive, and gate-tunable photodetection at room temperature in a novel metadevice based on gold/graphene Sierpinski carpet plasmonic fractals. We observed an unprecedented internal quantum efficiency up to 100% from the near-infrared to the visible range with an upper bound of optical detectivity of $10^{11}$ Jones and a gain up to $10^{6}$, which is a fingerprint of multiple hot carriers photogenerated in g…
Plasmon oscillations have been intensively studied for more than forty years in conventional two-dimensional electron gas systems in order to find new alternatives to the vacuum devices based on the Smith-Purcell effect in the far-infrared region. However, beside the multiple endeavors, up to date, the plasmon generation in semiconductor heterostructures has been very inefficient. Here we demonstrate that the use of high mobility graphene metamaterials, due to their well-known stronger light-plasmon coupling compared to semiconductor materials can significantly improve the efficiency of far-in…
Asymmetric-double-bars (ADB) structure is one of the most interesting plasmonic metamaterials that has been broadly investigated. Here we propose to manufacture ADB on top of elastic material, to get direct control to the dimension of ADB elements. To analyze the spectra numerically, simulation by commercial software (COMSOL) are carried out. We successfully modify the characteristic spectra and enhance Q-factor of the peak near infrared by introducing angular and amplitude parameters of the stretching of substrate in the simulation. At the mean time, we significantly restrain red shift in the…
We theoretically investigate photothermal heating of ultra-flexible metamaterials, which are obtained by randomly mixing TiN nanoparticles in polydimethylsiloxane (PDMS). Due to the plasmonic properties of TiN nanoparticles, incident light is perfectly absorbed in a broadband range (300-3000 nm) to generate heat within these metamaterials. Under irradiation of an 808 nm near-infrared laser with different intensities, our predicted temperature rises as a function of time agree well with recent experimental data. For a given laser intensity, the temperature rise varies non-monotonically with con…
In this work, we show that modulating the fractal dimension of nanoporous gold allows its effective dielectric response to be tailored over a wide spectral range of infrared wavelengths. In particular, the plasma edge and effective plasma frequency depend linearly on the fractal dimension, which can be controlled by varying the pore and ligament sizes. Importantly, the fractal porous metal exhibits superior plasmonic properties compared to its bulk counterpart. These properties, combined with a longer skin depth on the order of 100-200 nm, enables the penetration of optical energy deep into th…
