用于超导体与半导体和光电子学接口的超高阻抗超导热开关
An ultrahigh-impedance superconducting thermal switch for interfacing superconductors to semiconductors and optoelectronics
摘要:
目前许多量子和神经形态计算的方法都使用超导体作为其平台的基础或测量组件,并且需要在低温下运行。半导体系统通常被提议作为这些架构中的顶层控制,低温无源组件和中间超导电子器件充当最低温度级的直接接口。因此,这些架构需要一个低功率的超导体-半导体接口,这是目前不可用的。在这里,我们报告了一个超导开关,能够将低压超导输入直接转换为兼容的晶闸管(1,000 mV以上)输出在开尔文尺度的温度(1 K或4 K)。为了说明超导体和半导体接口的能力,我们用它来驱动光子集成电路中的发光二极管(LED),从低电压输入中产生1 K的光子,并用片上超导单光子探测器探测它们。我们还对器件的时序响应(开启时间小于300 ps,关断时间为15 ns)、输出阻抗(大于1 MΩ)和能量要求(0.18 fJ/um^2,3.24 mV/nW)进行了表征。
英文摘要:
A number of current approaches to quantum and neuromorphic computing use superconductors as the basis of their platform or as a measurement component, and will need to operate at cryogenic temperatures. Semiconductor systems are typically proposed as a top-level control in these architectures, with low-temperature passive components and intermediary superconducting electronics acting as the direct interface to the lowest-temperature stages. The architectures, therefore, require a low-power superconductor-semiconductor interface, which is not currently available. Here we report a superconducting switch that is capable of translating low-voltage superconducting inputs directly into semiconductor-compatible (above 1,000 mV) outputs at kelvin-scale temperatures (1 K or 4 K). To illustrate the capabilities in interfacing superconductors and semiconductors, we use it to drive a light-emitting diode (LED) in a photonic integrated circuit, generating photons at 1 K from a low-voltage input and detecting them with an on-chip superconducting single-photon detector. We also characterize our device's timing response (less than 300 ps turn-on, 15 ns turn-off), output impedance (greater than 1 MΩ), and energy requirements (0.18 fJ/um^2, 3.24 mV/nW).
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。