arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1903.09673cs.ROcs.SYeess.SYmath.DSmath.OC
收藏

合规性塑形用于具有弹性围裙的强度放大外骨骼控制

Compliance Shaping for Control of Strength Amplification Exoskeletons with Elastic Cuffs

Human Centered Robotics Lab in the University of Texas at Austin(德克萨斯大学奥斯汀分校人本机器人实验室)

Gray Cortright Thomas, Jeremiah M. Coholich, Luis Sentis

AI总结:

本文提出了一种双合规性塑形方法,通过在力敏感围裙中串联弹簧来设计外骨骼的合规行为,以实现高放大比下的稳定性和鲁棒性,同时引入反馈控制器和增益调节方法,并通过单自由度肘部外骨骼验证了方法的有效性。

摘要:

能够放大操作者力量的外骨骼可以实现对未知物体的重载操作。然而,这种行为难以实现,因为外骨骼需要感知并放大操作者交互力的同时保持稳定。然而,放大与连接到操作者时的鲁棒稳定性目标本质上是冲突的。为此,我们引入了一种设计,在力敏感围裙中串联一个弹簧。这允许我们设计出名义上被动的外骨骼合规行为,即使具有高放大比。实际上,时间延迟和离散时间滤波器阻止我们的策略实际上实现被动性,但设计的合规性仍使外骨骼对弹簧状人类行为更具鲁棒性。我们的外骨骼由串联弹性执行器(SEA)驱动,这向系统引入了另一个弹簧。我们表明,为外骨骼塑形围裙的合规性可以近似转化为对SEA弹簧合规性的塑形问题。因此,我们引入了一种反馈控制器和增益调节方法,利用现有的SEAs合规性塑形技术。我们称之为“双合规性塑形”方法。在大放大比下,此控制器倾向于放大非线性传动摩擦效应,因此我们还提出了“传动扰动观测器”以缓解这一缺点。我们的方法在单自由度肘部外骨骼上进行了验证。

英文摘要:

Exoskeletons which amplify the strength of their operators can enable heavy-duty manipulation of unknown objects. However, this type of behavior is difficult to accomplish; it requires the exoskeleton to sense and amplify the operator's interaction forces while remaining stable. But, the goals of amplification and robust stability when connected to the operator fundamentally conflict. As a solution, we introduce a design with a spring in series with the force sensitive cuff. This allows us to design an exoskeleton compliance behavior which is nominally passive, even with high amplification ratios. In practice, time delay and discrete time filters prevent our strategy from actually achieving passivity, but the designed compliance still makes the exoskeleton more robust to spring-like human behaviors. Our exoskeleton is actuated by a series elastic actuator (SEA), which introduces another spring into the system. We show that shaping the cuff compliance for the exoskeleton can be made into approximately the same problem as shaping the spring compliance of an SEA. We therefore introduce a feedback controller and gain tuning method which takes advantage of an existing compliance shaping technique for SEAs. We call our strategy the "double compliance shaping" method. With large amplification ratios, this controller tends to amplify nonlinear transmission friction effects, so we additionally propose a "transmission disturbance observer" to mitigate this drawback. Our methods are validated on a single-degree-of-freedom elbow exoskeleton.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑