基于嵌入式测距和轨道几何的GNSS虚拟应答器诊断
Diagnostics of GNSS-based Virtual Balise in Railway Using Embedded Odometry and Track Geometry
摘要:
全球导航卫星系统在铁路部门的使用是根据虚拟应答器的概念提出的。基于VB的定位系统通过在铁路轨道上设置VB点并使用来自GNSS接收器的位置解来确定VB点的通过来工作。虽然诸如SBAS或GBAS的增强系统能够满足航空标准的低至10-7级的完整性要求,但是难以满足铁路部门的高完整性要求,因为首先位于地面的铁路用户受到地面环境(例如地形)的影响,其次,铁路部门的严格要求延伸到10-9水平以下。本文提出了一种方法来检测故障的GNSS解决方案,由于卫星故障或本地的影响。首先,监测性能的要求是仔细推导出占全球导航卫星系统的特殊性,即连续VB故障的可能性不能被忽视。本文的第二个贡献是建议检测使用里程计和轨道几何的车载系统。这使得能够监视所有三维解误差,从而可以实现故障检测的更高灵敏度。模拟已经进行了单和双(GPS,GALILEO)解决方案。已经发现,对于大多数双星座几何形状,度量的组合能够实现非常小的平均故障率从5.0m/s下降到0.03m/s的漏检概率。里程表实现的检测性能根据训练的航向而变化。另一方面,当里程计和轨道几何一起使用时,所有的三向监视器都可以获得稳定的结果,而不管航向如何。
英文摘要:
The use of GNSS in the railway sector has been postulated on the notion of a Virtual Balise (VB). The VB-based positioning system works by setting a VB point on the railway track and determining the passage of the VB point using the position solution from the GNSS receiver. Although augmentation systems such as SBAS or GBAS are able to satisfy the integrity requirements of the aviation standards down to the 10-7 level, it is difficult to satisfy the high integrity requirements of the railway sector because firstly the railway users located on the ground are affected by the ground environment such as terrain, buildings and tunnels and secondly because the stringency of the railway sector requirements extends below the 10-9 level. This paper proposes a method to detect faults in the GNSS solution due to satellite failure or local effects. Firstly, requirements for the monitoring performance are carefully derived accounting for the specificities of GNSS, namely that the possibility of consecutive VB faults cannot be discounted. The second contribution of the paper is the proposed detection using both odometry and track geometry of the onboard system. This enables to monitor all three-dimensional solution error so that higher sensitivity for the fault detection can be achieved. Simulations have been performed with both single and dual (GPS, GALILEO) solutions. It has been found that the combinations of metrics are able to achieve very small missed detection probabilities for mean failure rates from 5.0m/s down to 0.03m/s for most dual constellation geometries. The detection performance of the odometer implementation varied according to the heading of the train. On the other hand, when odometry and track geometry are used together, all the three-directional monitors can obtain stable results regardless of the heading.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。