arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1902.09912eess.SYcs.SY
收藏

一种基于软件的低抖动伺服时钟用于低成本相量测量单元

A Software-based Low-Jitter Servo Clock for Inexpensive Phasor Measurement Units

University of Trento(特伦托大学);Queen’s University of Belfast(贝尔法斯特女王大学)

Pietro Tosato, David Macii, Daniele Fontanelli, Davide Brunelli, David Laverty

AI总结:

本文提出了一种低成本相量测量单元(PMU)中的伺服时钟设计与实现,采用经典比例积分(PI)控制器,通过优化参数以最小化本地振荡器触发定时器的同步误差,且无需专用的同步电路。

摘要:

本文提出了伺服时钟(SC)的设计与实现,用于低成本相量测量单元(PMU)。SC依赖于经典比例积分(PI)控制器,已经过适当调优以最小化由于本地振荡器触发 onboard 定时器导致的同步误差。SC已实现于OpenPMU项目中开发的PMU原型中,使用BeagleBone Black(BBB)板。所提出解决方案的显著特点是能够以良好的长期稳定性跟踪输入脉冲每秒(PPS)参考信号,且不需要特定的 onboard 同步电路。确实,SC的实现仅依赖一个协处理器用于实时应用,并且只需要一个输入PPS信号,该信号可以来自单个变电站时钟。

英文摘要:

This paper presents the design and the implementation of a servo-clock (SC) for low-cost Phasor Measurement Units (PMUs). The SC relies on a classic Proportional Integral (PI) controller, which has been properly tuned to minimize the synchronization error due to the local oscillator triggering the on-board timer. The SC has been implemented into a PMU prototype developed within the OpenPMU project using a BeagleBone Black (BBB) board. The distinctive feature of the proposed solution is its ability to track an input Pulse-Per-Second (PPS) reference with good long-term stability and with no need for specific on-board synchronization circuitry. Indeed, the SC implementation relies only on one co-processor for real-time application and requires just an input PPS signal that could be distributed from a single substation clock.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑