arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1902.05922cs.CE
收藏

准静态和动态裂纹扩展的相场模拟:COMSOL实现及实例研究

Phase field modeling of quasi-static and dynamic crack propagation: COMSOL implementation and case studies

Shuwei Zhou, Timon Rabczuk, Xiaoying Zhuang

摘要:

相场模型(PFM)表示裂纹的几何形状在扩散的方式,而不引入尖锐的不连续性。与基于离散裂纹模型的数值方法相比,这一特征使PFM能够有效地模拟裂纹扩展,特别是对于复杂的裂纹模式。由于引入了"\phased场”,即使是纯力学问题,相场法也可以从本质上将其处理为多场问题。因此,它被认为是PFM的实现基于一个软件开发,特别是支持多场问题的解决方案,应该是更有效的,更简单,更有效地比PFM实现在一个通用的有限元软件。在这项工作中,作者的目的是设计一个简单而有效的实施相场模型的准静态和动态断裂的建模在通用商业软件开发商,COMSOL Multiphysics。值得注意的是,只有拉应力引起的裂纹占裂纹的演变,通过使用弹性应变能的分解。扩散裂纹的宽度由长度尺度参数控制。控制物体运动和相场演化的方程被写入COMSOL中的不同模块,然后耦合到整个系统进行求解。采用交错格式求解耦合系统,在一个时间步长内依次求解各个模块。一些2D和3D的例子进行测试,以调查本实施方案的性能。我们的模拟结果与前人的工作吻合良好,表明了COMSOL实现PFM的可行性和有效性。

英文摘要:

The phase-field model (PFM) represents the crack geometry in a diffusive way without introducing sharp discontinuities. This feature enables PFM to effectively model crack propagation compared with numerical methods based on discrete crack model, especially for complex crack patterns. Due to the involvement of \phased field", phase-field method can be essentially treated a multifield problem even for pure mechanical problem. Therefore, it is supposed that the implementation of PFM based on a software developer that especially supports the solution of multifield problems should be more effective, simpler and more efficient than PFM implemented on a general finite element software. In this work, the authors aim to devise a simple and efficient implementation of phase-field model for the modelling of quasi-static and dynamic fracture in the general purpose commercial software developer, COMSOL Multiphysics. Notably only the tensile stress induced crack is accounted for crack evolution by using the decomposition of elastic strain energy. The width of the diffusive crack is controlled by a length-scale parameter. Equations that govern body motion and phase-field evolution are written into different modules in COMSOL, which are then coupled to a whole system to be solved. A staggered scheme is adopted to solve the coupled system and each module is solved sequentially during one time step. A number of 2D and 3D examples are tested to investigate the performance of the present implementation. Our simulations show good agreement with previous works, indicating the feasibility and validity of the COMSOL implementation of PFM.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑