数据驱动的废水泵站预测性能源优化
Data-driven Predictive Energy Optimization in a Wastewater Pumping Station
AI总结:
本文提出了一种基于数据驱动的预测性控制方法,通过结合统计学习和深度强化学习,优化废水泵站的能耗,同时减少警报数量。
摘要:
城市废水部门正被推动优化过程,以在不损害其质量标准的情况下减少能耗。能耗可以代表全球运营成本的重要份额(在高强度能源消费者中,占比在50%至60%之间)。泵送是污水处理厂最大的电力消费者。因此,泵单元的最优控制可以帮助运营商降低运营成本。本文描述了一种创新的预测控制策略,用于废水变频泵,以最小化电力消耗,考虑了废水摄入率的不确定性预测以及通过监督控制和数据采集系统可访问的传感器收集的信息。所提出的控制方法结合了统计学习(回归和预测模型)和深度强化学习(近端策略优化)。主要原创贡献包括:i)无模型和数据驱动的预测控制;ii)以变量废水设定点水平操作储罐的控制理念;iii)使用监督学习生成合成数据来预训练强化学习策略,而无需与系统物理交互。对于90天的真实案例研究,结果表明电力消耗减少了16.7%,同时与当前固定设定点水平的操作场景相比,警报数量减少了97%(储罐水位超过7.2米)。数值分析显示,所提出的基于数据的方法能够探索警报数量与消耗最小化之间的权衡,为决策者提供不同的选择。
英文摘要:
Urban wastewater sector is being pushed to optimize processes in order to reduce energy consumption without compromising its quality standards. Energy costs can represent a significant share of the global operational costs (between 50% and 60%) in an intensive energy consumer. Pumping is the largest consumer of electrical energy in a wastewater treatment plant. Thus, the optimal control of pump units can help the utilities to decrease operational costs. This work describes an innovative predictive control policy for wastewater variable-frequency pumps that minimize electrical energy consumption, considering uncertainty forecasts for wastewater intake rate and information collected by sensors accessible through the Supervisory Control and Data Acquisition system. The proposed control method combines statistical learning (regression and predictive models) and deep reinforcement learning (Proximal Policy Optimization). The following main original contributions are produced: i) model-free and data-driven predictive control; ii) control philosophy focused on operating the tank with a variable wastewater set-point level; iii) use of supervised learning to generate synthetic data for pre-training the reinforcement learning policy, without the need to physically interact with the system. The results for a real case-study during 90 days show a 16.7% decrease in electrical energy consumption while still achieving a 97% reduction in the number of alarms (tank level above 7.2 meters) when compared with the current operating scenario (operating with a fixed set-point level). The numerical analysis showed that the proposed data-driven method is able to explore the trade-off between number of alarms and consumption minimization, offering different options to decision-makers.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。