Prevailing fingerprint recognition systems are vulnerable to spoof attacks. To mitigate these attacks, automated spoof detectors are trained to distinguish a set of live or bona fide fingerprints from a set of known spoof fingerprints. Despite their success, spoof detectors remain vulnerable when exposed to attacks from spoofs made with materials not seen during training of the detector. To alleviate this shortcoming, we approach spoof detection as a one-class classification problem. The goal is to train a spoof detector on only the live fingerprints such that once the concept of "live" has been learned, spoofs of any material can be rejected. We accomplish this through training multiple generative adversarial networks (GANS) on live fingerprint images acquired with the open source, dual-camera, 1900 ppi RaspiReader fingerprint reader. Our experimental results, conducted on 5.5K spoof images (from 12 materials) and 11.8K live images show that the proposed approach improves the cross-material spoof detection performance over state-of-the-art one-class and binary class spoof detectors on 11 of 12 testing materials and 7 of 12 testing materials, respectively.
IIIT Hyderabad（海得拉巴国际信息技术学院）；Michigan State University（密歇根州立大学）
Spoof detectors are classifiers that are trained to distinguish spoof fingerprints from bonafide ones. However, state of the art spoof detectors do not generalize well on unseen spoof materials. This study proposes a style transfer based augmentation wrapper that can be used on any existing spoof detector and can dynamically improve the robustness of the spoof detection system on spoof materials for which we have very low data. Our method is an approach for synthesizing new spoof images from a few spoof examples that transfers the style or material properties of the spoof examples to the conte…
We present a style-transfer based wrapper, called Universal Material Generator (UMG), to improve the generalization performance of any fingerprint spoof detector against spoofs made from materials not seen during training. Specifically, we transfer the style (texture) characteristics between fingerprint images of known materials with the goal of synthesizing fingerprint images corresponding to unknown materials, that may occupy the space between the known materials in the deep feature space. Synthetic live fingerprint images are also added to the training dataset to force the CNN to learn gene…
The vulnerability of automated fingerprint recognition systems to presentation attacks (PA), i.e., spoof or altered fingers, has been a growing concern, warranting the development of accurate and efficient presentation attack detection (PAD) methods. However, one major limitation of the existing PAD solutions is their poor generalization to new PA materials and fingerprint sensors, not used in training. In this study, we propose a robust PAD solution with improved cross-material and cross-sensor generalization. Specifically, we build on top of any CNN-based architecture trained for fingerprint…
Deep learning-based models have been shown to improve the accuracy of fingerprint recognition. While these algorithms show exceptional performance, they require large-scale fingerprint datasets for training and evaluation. In this work, we propose a novel fingerprint synthesis and reconstruction framework based on the StyleGan2 architecture, to address the privacy issues related to the acquisition of such large-scale datasets. We also derive a computational approach to modify the attributes of the generated fingerprint while preserving their identity. This allows synthesizing multiple differen…
A major limitation to advances in fingerprint spoof detection is the lack of publicly available, large-scale fingerprint spoof datasets, a problem which has been compounded by increased concerns surrounding privacy and security of biometric data. Furthermore, most state-of-the-art spoof detection algorithms rely on deep networks which perform best in the presence of a large amount of training data. This work aims to demonstrate the utility of synthetic (both live and spoof) fingerprints in supplying these algorithms with sufficient data to improve the performance of fingerprint spoof detection…
The primary purpose of a fingerprint recognition system is to ensure a reliable and accurate user authentication, but the security of the recognition system itself can be jeopardized by spoof attacks. This study addresses the problem of developing accurate, generalizable, and efficient algorithms for detecting fingerprint spoof attacks. Specifically, we propose a deep convolutional neural network based approach utilizing local patches centered and aligned using fingerprint minutiae. Experimental results on three public-domain LivDet datasets (2011, 2013, and 2015) show that the proposed approa…
University Federico II of Naples（那不勒斯费德里科二世大学）；Technical University of Munich（慕尼黑工业大学）
Thanks to the fast progress in synthetic media generation, creating realistic false images has become very easy. Such images can be used to wrap "rich" fake news with enhanced credibility, spawning a new wave of high-impact, high-risk misinformation campaigns. Therefore, there is a fast-growing interest in reliable detectors of manipulated media. The most powerful detectors, to date, rely on the subtle traces left by any device on all images acquired by it. In particular, due to proprietary in-camera processes, like demosaicing or compression, each camera model leaves trademark traces that can…
We present the design and prototype of an open source, optical fingerprint reader, called RaspiReader, using ubiquitous components. RaspiReader, a low-cost and easy to assemble reader, provides the fingerprint research community a seamless and simple method for gaining more control over the sensing component of fingerprint recognition systems. In particular, we posit that this versatile fingerprint reader will encourage researchers to explore novel spoof detection methods that integrate both hardware and software. RaspiReader's hardware is customized with two cameras for fingerprint acquisitio…
We utilize the dynamics involved in the imaging of a fingerprint on a touch-based fingerprint reader, such as perspiration, changes in skin color (blanching), and skin distortion, to differentiate real fingers from spoof (fake) fingers. Specifically, we utilize a deep learning-based architecture (CNN-LSTM) trained end-to-end using sequences of minutiae-centered local patches extracted from ten color frames captured on a COTS fingerprint reader. A time-distributed CNN (MobileNet-v1) extracts spatial features from each local patch, while a bi-directional LSTM layer learns the temporal relationsh…
Using printed photograph and replaying videos of biometric modalities, such as iris, fingerprint and face, are common attacks to fool the recognition systems for granting access as the genuine user. With the growing online person-to-person shopping (e.g., Ebay and Craigslist), such attacks also threaten those services, where the online photo illustration might not be captured from real items but from paper or digital screen. Thus, the study of anti-spoofing should be extended from modality-specific solutions to generic-object-based ones. In this work, we define and tackle the problem of Generi…
In recent years, fingerprint recognition systems have made remarkable advancements in the field of biometric security as it plays an important role in personal, national and global security. In spite of all these notable advancements, the fingerprint recognition technology is still susceptible to spoof attacks which can significantly jeopardize the user security. The cross sensor and cross material spoof detection still pose a challenge with a myriad of spoof materials emerging every day, compromising sensor interoperability and robustness. This paper proposes a novel method for fingerprint sp…
University of Cagliari（卡利亚里大学）；Northwestern Polytechnical University（西北工业大学）
We investigated the threat level of realistic attacks using latent fingerprints against sensors equipped with state-of-art liveness detectors and fingerprint verification systems which integrate such liveness algorithms. To the best of our knowledge, only a previous investigation was done with spoofs from latent prints. In this paper, we focus on using snapshot pictures of latent fingerprints. These pictures provide molds, that allows, after some digital processing, to fabricate high-quality spoofs. Taking a snapshot picture is much simpler than developing fingerprints left on a surface by mag…
We open source an easy to assemble, spoof resistant, high resolution, optical fingerprint reader, called RaspiReader, using ubiquitous components. By using our open source STL files and software, RaspiReader can be built in under one hour for only US $175. As such, RaspiReader provides the fingerprint research community a seamless and simple method for quickly prototyping new ideas involving fingerprint reader hardware. In particular, we posit that this open source fingerprint reader will facilitate the exploration of novel fingerprint spoof detection techniques involving both hardware and sof…
University of Campinas（坎皮纳斯州立大学）；Federal University of Minas Gerais（米纳斯吉拉斯联邦大学）；Federal University of Ouro Preto（奥鲁普雷托联邦大学）
Biometrics systems have significantly improved person identification and authentication, playing an important role in personal, national, and global security. However, these systems might be deceived (or "spoofed") and, despite the recent advances in spoofing detection, current solutions often rely on domain knowledge, specific biometric reading systems, and attack types. We assume a very limited knowledge about biometric spoofing at the sensor to derive outstanding spoofing detection systems for iris, face, and fingerprint modalities based on two deep learning approaches. The first approach c…
IIIT Hyderabad（印度海得拉巴国际信息技术学院）；Michigan State University（密歇根州立大学）；Sony Research India Pvt. Ltd.（索尼印度研究私人有限公司）；Sony Group Corporation（索尼集团公司）
Typical fingerprint recognition systems are comprised of a spoof detection module and a subsequent recognition module, running one after the other. In this paper, we reformulate the workings of a typical fingerprint recognition system. In particular, we posit that both spoof detection and fingerprint recognition are correlated tasks. Therefore, rather than performing the two tasks separately, we propose a joint model for spoof detection and matching to simultaneously perform both tasks without compromising the accuracy of either task. We demonstrate the capability of our joint model to obtain …
Indian Institute of Technology (BHU)（印度理工学院（瓦拉纳西））；Wichita State University（威奇托州立大学）
Incremental learning enables the learner to accommodate new knowledge without retraining the existing model. It is a challenging task which requires learning from new data as well as preserving the knowledge extracted from the previously accessed data. This challenge is known as the stability-plasticity dilemma. We propose AILearn, a generic model for incremental learning which overcomes the stability-plasticity dilemma by carefully integrating the ensemble of base classifiers trained on new data with the current ensemble without retraining the model from scratch using entire data. We demonstr…
Fingerprint Presentation Attack Detector Using Global-Local Model
Shenzhen University（深圳大学）；College of Computer Science and Software Engineering（计算机科学与软件学院）；Computer Vision Institute（计算机视觉研究所）；Shenzhen Institute of Artificial Intelligence and Robotics for Society（深圳市人工智能与机器人研究院）；National Engineering Laboratory for Big Data System Computing Technology（国家大数据系统计算技术工程实验室）；Guangdong Key Laboratory of Intelligent Information Processing（广东省智能信息处理重点实验室）
Department of Computer Science and Engineering（计算机科学与工程系）；Michigan State University（密歇根州立大学）；East Lansing（东兰辛（注意：这是城市名，不是机构，根据提取规则应忽略，但原文本中Michigan State University是明确机构，此处按要求提取））
We study the problem of fingerprint presentation attack detection (PAD) under unknown PA materials not seen during PAD training. A dataset of 5,743 bonafide and 4,912 PA images of 12 different materials is used to evaluate a state-of-the-art PAD, namely Fingerprint Spoof Buster. We utilize 3D t-SNE visualization and clustering of material characteristics to identify a representative set of PA materials that cover most of PA feature space. We observe that a set of six PA materials, namely Silicone, 2D Paper, Play Doh, Gelatin, Latex Body Paint and Monster Liquid Latex provide a good representat…
University of Cagliari（卡利亚里大学）；Clarkson University（克拉克森大学）
A spoof attack, a subset of presentation attacks, is the use of an artificial replica of a biometric in an attempt to circumvent a biometric sensor. Liveness detection, or presentation attack detection, distinguishes between live and fake biometric traits and is based on the principle that additional information can be garnered above and beyond the data procured by a standard authentication system to determine if a biometric measure is authentic. The goals for the Liveness Detection (LivDet) competitions are to compare software-based fingerprint liveness detection and artifact detection algori…
At present spoofing attacks via which biometric system is potentially vulnerable against a fake biometric characteristic, introduces a great challenge to recognition performance. Despite the availability of a broad range of presentation attack detection (PAD) or liveness detection algorithms, fingerprint sensors are vulnerable to spoofing via fake fingers. In such situations, finger dorsal images can be thought of as an alternative which can be captured without much user cooperation and are more appropriate for outdoor security applications. In this paper, we present a first feasibility study …
Touch-based fingerprint biometrics is one of the most popular biometric modalities with applications in several fields. Problems associated with touch-based techniques such as the presence of latent fingerprints and hygiene issues due to many people touching the same surface motivated the community to look for non-contact-based solutions. For the last few years, contactless fingerprint systems are on the rise and in demand because of the ability to turn any device with a camera into a fingerprint reader. Yet, before we can fully utilize the benefit of noncontact-based methods, the biometric co…
Introduction to Presentation Attack Detection in Fingerprint Biometrics
European Commission, Joint Research Centre（欧盟委员会联合研究中心）；Universidad Autonoma de Madrid（马德里自治大学）；Università di Bologna（博洛尼亚大学）；Università di Cagliari（卡利亚里大学）
Centro de Tecnologia da Informação Renato Archer (CTI)（雷纳托·阿切尔信息技术中心 (CTI)）；University of Campinas (UNICAMP)（坎皮纳斯州立大学 (UNICAMP)）
With the growing use of biometric authentication systems in the past years, spoof fingerprint detection has become increasingly important. In this work, we implement and evaluate two different feature extraction techniques for software-based fingerprint liveness detection: Convolutional Networks with random weights and Local Binary Patterns. Both techniques were used in conjunction with a Support Vector Machine (SVM) classifier. Dataset Augmentation was used to increase classifier's performance and a variety of preprocessing operations were tested, such as frequency filtering, contrast equaliz…
Alpha Reality Co（阿尔法现实公司）；IRAN Broadcasting University (IRIBU)（伊朗广播大学）
Face anti-spoofing aims at identifying the real face, as well as the fake one, and gains a high attention in security-sensitive applications, liveness detection, fingerprinting, and so on. In this paper, we address the anti-spoofing problem by proposing two end-to-end systems of convolutional neural networks. One model is developed based on the EfficientNet B0 network which has been modified in the final dense layers. The second one, is a very light model of the MobileNet V2, which has been contracted, modified and retrained efficiently on the data being created based on the Rose-Youtu dataset…
Biometric recognition systems have advanced significantly in the last decade and their use in specific applications will increase in the near future. The ability to conduct meaningful comparisons and assessments will be crucial to successful deployment and increasing biometric adoption. The best modality used as unimodal biometric systems are unable to fully address the problem of higher recognition rate. Multimodal biometric systems are able to mitigate some of the limitations encountered in unimodal biometric systems, such as non-universality, distinctiveness, non-acceptability, noisy sensor…
Norwegian University of Science and Technology (NTNU)（挪威科技大学）
Fingerprint recognition systems are widely deployed in various real-life applications as they have achieved high accuracy. The widely used applications include border control, automated teller machine (ATM), and attendance monitoring systems. However, these critical systems are prone to spoofing attacks (a.k.a presentation attacks (PA)). PA for fingerprint can be performed by presenting gummy fingers made from different materials such as silicone, gelatine, play-doh, ecoflex, 2D printed paper, 3D printed material, or latex. Biometrics Researchers have developed Presentation Attack Detection (P…
Shenzhen University（深圳大学）；Shenzhen Institute of Artificial Intelligence and Robotics for Society（深圳人工智能与机器人研究院）
Due to the diversity of attack materials, fingerprint recognition systems (AFRSs) are vulnerable to malicious attacks. It is thus important to propose effective fingerprint presentation attack detection (PAD) methods for the safety and reliability of AFRSs. However, current PAD methods often exhibit poor robustness under new attack types settings. This paper thus proposes a novel channel-wise feature denoising fingerprint PAD (CFD-PAD) method by handling the redundant noise information ignored in previous studies. The proposed method learns important features of fingerprint images by weighing …
