arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1812.07784physics.app-ph
收藏

基于压电扭转传感器的扭转共振和扭转波传播的快速可重复剪切模量测量

Quick and repeatable shear modulus measurement based on torsional resonance and torsional wave propagation using a piezoelectric torsional transducer

Mingyu Xie, Qiang Huan Faxin Li

摘要:

剪切模量是材料的基本力学性能之一,但其快速准确的测量仍是一个难题。本文提出了两种基于扭转共振和扭转波传播的剪切模量测量方法。首先,介绍了由两个厚度极化、厚度剪切(d15)压电半环组成的扭转换能器。其次,推导了换能器-圆柱试件系统的等效电路,并利用扭转共振频率显式地求出了剪切模量。还可以得到内摩擦力,它是通过使用一个近似公式计算的。介绍了基于扭转波传播的剪切模量和内耗测量原理。最后,对1045钢、铝、石英玻璃和PMMA四种材料的剪切模量和内耗进行了测量。结果表明,两种方法测得的剪切模量非常接近,与文献中的参考值一致。共振法非常方便且重复性高,但通常不适用于第一扭转共振可能不可见的长试样。波传播法特别适用于长试样,建议采用高频测量。两种方法测得的内摩擦力也比较接近,建议采用简单的波衰减法。本文提出的两种剪切模量测量方法具有较好的可靠性和推广价值。

英文摘要:

Shear modulus is one of the fundamental mechanical properties of materials, while its quick and accurate measurement is still a challenge. Here we proposed two methods for shear modulus measurement based on torsional resonance and torsional wave propagation using a same piezoelectric torsional transducer. Firstly, the torsional transducer was introduced which consists of two thickness poled, thickness shear (d15) piezoelectric half-rings. Secondly, the equivalent circuit of the transducer-cylindrical specimen system is derived and the shear modulus can be explicitly obtained using the torsional resonance frequency. The internal friction can also be obtained, which is calculated by using an approximate formula. Then, the principle of shear modulus and internal friction measurement based on torsional wave propagation were presented. Finally, shear modulus and internal friction measurement on four materials including 1045 steel, aluminum, quartz glass and PMMA, were conducted. Results indicate that the measured shear moduli using these two methods are very close to each other, and consistent with the reference values in literatures. The resonance method is quite convenient and highly repeatable, but is typically not suitable for long specimens where the first torsional resonance may not be visible. The wave propagation method is especially suitable for long specimens and high frequency measurement is suggested. The internal frictions measured by these two methods were also close to each other, and the simple wave attenuation method is suggested. The two shear modulus measurement methods proposed in this work are quite reliable and can be widely used in near future.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑