一种用于物联网的高效单级和两级E类功率放大器(2.4GHz)设计
Design of an Efficient Single-Stage and 2-Stages Class-E Power Amplifier (2.4GHz) for Internet-of-Things
摘要:
在这项工作中,单级和两级2.4 GHz的功率放大器(PA)的设计。所提出的PA已被设计为使用谐波抑制和优化的阻抗匹配技术来提供高增益和提高的效率。有两个谐波抑制电路,每级功率放大器由2个电容和2个电感组成,这将有助于抑制2.4 GHz的谐波频率。这些抑制电路将有助于提高功率放大器的整体效率。两个PA均提供4.2V的VCC电源。输入和输出阻抗匹配到50欧姆。仿真和实验结果表明,单级功率放大器的增益和功率附加效率分别为17:58 dB和53%。实验增益为16:7 dB,PAE为49.5%。而对于两级放大器,仿真增益为34.6dB,PAE为55%,而实验增益为30.5dB,PAE为53.1%。最终设计在Taconic印刷电路板(PCB)上制造,厚度为0.79 mm,介电常数值为3.2,单级PA尺寸为4.6 cm x 3.4 cm,二级PA尺寸为5.9 cm x 3.6 cm。
英文摘要:
In this work, the designs of a single-stage and 2-stage 2.4 GHz power amplifier (PA) are presented. The proposed PAs have been designed to provide high gain and improved efficiency using harmonic suppression and optimized impedance matching techniques. There are two harmonic suppression circuits, each stage of the PA consists of 2 capacitors and 2 inductors, which will help to suppress the harmonic frequency for 2.4 GHz. These suppression circuits will help to enhance the overall efficiency of the PAs. Both the PAs are provided with a VCC supply of 4.2V. Input and output impedances are matched to 50 ohms. Simulation and experimental results are presented, where the simulated gain and power added efficiency (PAE) for single stage PA are 17:58dB and 53%, respectively. While the experimental gain and PAE are 16:7dB and 49.5%, respectively. On the other hand, for 2-stages PA, simulated gain comes out to be 34.6dB and PAE is 55%, while the experimental gain and PAE are 30.5dB and 53.1%, respectively. The final design is being fabricated on the Taconic printed circuit board (PCB) with a thickness of 0.79mm and the dielectric constant value of 3.2 and its dimensions are 4.6cm x 3.4cm for single stage and 5.9cm x 3.6cm for 2-stages PA.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。