几何形状对AlGaN/GaN和InAlN/GaN霍尔效应传感器灵敏度和失调的影响
Effect of Geometry on Sensitivity and Offset of AlGaN/GaN and InAlN/GaN Hall-effect Sensors
摘要:
在这项工作中的电流和电压缩放的灵敏度和信噪比(SNR)(相对于热噪声)的各种八角形AlGaN/GAN和InAlN/GAN霍尔效应传感器进行了检查。金属接触长度对灵敏度和传感器偏移的影响进行了评价。考虑到器件形状的计算表明,具有点状接触的器件具有最高的电流标度灵敏度(68.9 V/A/T),而具有与其非接触侧相等长度的接触的器件具有最高的电压标度灵敏度(86.9 mV/V/T)。其他两种设备的灵敏度密切遵循预测趋势。所有器件在低电源电流工作时(< 300 $μ$ A)的失调均小于20 $μ$ T,在较高电源电流(高达1.2 mA)时,大多数器件的失调均保持在35 $μ$ T以下。器件之间一致的低失调意味着霍尔效应传感器几何结构的选择应主要取决于器件是电流偏置还是电压偏置以及其工作频率。这项工作表明,GAN霍尔效应传感器性能可以通过调整特定于其功能的霍尔效应板的几何形状来改善(例如,电力电子、导航、汽车应用)。
英文摘要:
The current- and voltage-scaled sensitivities and signal-to-noise ratios (SNR) (with respect to thermal noise) of various octagonal AlGaN/GaN and InAlN/GaN Hall-effect sensors were examined in this work. The effect of metal contact lengths on sensitivity and sensor offset was evaluated. Calculations that take into account the shape of the device show that devices with point-like contacts have the highest current-scaled sensitivity (68.9 V/A/T), while devices with contacts of equal length to their non-contact sides have the highest voltage-scaled sensitivity (86.9 mV/V/T). The sensitivities of the two other devices follow the predicted trends closely. All the devices have offsets less than 20 $μ$T at low supply current operation (< 300 $μ$A) and most remain below 35 $μ$T at higher supply current (up to 1.2 mA). The consistent low offsets across the devices imply that the choice of Hall-effect sensor geometry should mainly depend on whether the device is current-biased or voltage-biased and the frequency at which it will operate. This work demonstrates that GaN Hall-effect sensor performance can be improved by adjusting the geometry of the Hall-effect plate specific to its function (e.g., power electronics, navigation, automotive applications).
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。