Simultaneous Contact and Aerodynamic Force Estimation (s-CAFE) for Aerial Robots
Skydio(Skydio公司);German Aerospace Center (DLR)(德国航空航天中心(DLR));Roboception GmbH(Roboception有限公司);Transportation Research Center(交通研究中心);WindEEE Research Institute(WindEEE研究所)
Teodor Tomić, Philipp Lutz, Korbinian Schmid, Andrew Mathers, Sami Haddadin
In this paper, we consider the problem of multirotor flying robots physically interacting with the environment under wind influence. The result are the first algorithms for simultaneous online estimation of contact and aerodynamic wrenches acting on the robot based on real-world data, without the need for dedicated sensors. For this purpose, we investigate two model-based techniques for discriminating between aerodynamic and interaction forces. The first technique is based on aerodynamic and contact torque models, and uses the external force to estimate wind speed. Contacts are then detected based on the residual between estimated external torque and expected (modeled) aerodynamic torque. Upon detecting contact, wind speed is assumed to change very slowly. From the estimated interaction wrench, we are also able to determine the contact location. This is embedded into a particle filter framework to further improve contact location estimation. The second algorithm uses the propeller aerodynamic power and angular speed as measured by the speed controllers to obtain an estimate of the airspeed. An aerodynamics model is then used to determine the aerodynamic wrench. Both methods rely on accurate aerodynamics models. Therefore, we evaluate data-driven and physics based models as well as offline system identification for flying robots. For obtaining ground truth data we performed autonomous flights in a 3D wind tunnel. Using this data, aerodynamic model selection, parameter identification, and discrimination between aerodynamic and contact forces could be done. Finally, the developed methods could serve as useful estimators for interaction control schemes with simultaneous compensation of wind disturbances.
Estimation of Aerodynamics Forces in Dynamic Morphing Wing Flight
Silicon Synapse Lab., Department of Electrical and Computer Engineering, Northeastern University, Boston, USA(Silicon Synapse实验室,电气与计算机工程系,东北大学,波士顿,美国);Department of Mechanical Engineering, Univ. of California, Berkeley CA 94720, USA(机械工程系,加州大学伯克利分校,伯克利,美国);Department of Aerospace Engineering, California Institute of Technology, Pasadena, USA(航空航天工程系,加州理工学院,帕萨迪纳,美国)
Muscle Coactivation in the Sky: Geometry and Pareto Optimality of Energy vs. Aerodynamic Promptness and Multirotors as Variable Stiffness Actuators
Robotics and Mechatronics Department, Electrical Engineering, Mathematics, and Computer Science (EEMCS) Faculty(代尔夫特理工大学机器人与机电系);Department of Computer, Control and Management Engineering(罗马萨皮恩扎大学计算机、控制与管理工程系)
AERMANI-Diffusion: Regime-Conditioned Diffusion for Dynamics Learning in Aerial Manipulators
Robotics Research Center, International Institute of Information Technology Hyderabad(国际信息科技学院海得拉巴分校机器人研究中心);Department of Computer Science, The University of Manchaster(曼彻斯特大学计算机科学系)
Integration of a Variable Stiffness Link for Long-Reach Aerial Manipulation
Department of Electrical and Photonics Engineering Control, Robotics and Embodied AI, Technical University of Denmark(技术大学丹麦分校电气与光子工程系);GRVC Robotics Laboratory, Universidad de Sevilla(塞维利亚大学GRVC机器人实验室)
Learning Aerodynamics for the Control of Flying Humanoid Robots
Artificial and Mechanical Intelligence Laboratory(人工智能与机械实验室);Istituto Italiano di Tecnologia(意大利技术研究院);Dipartimento di Ingegneria Industriale(工业工程系);Università di Napoli Federico II(那不勒斯费德里科二世大学);School of Computer Science(计算机科学学院);University of Manchester(曼彻斯特大学);Dipartimento di Scienze e Tecnologie Aerospaziali(航空航天科学与技术系);Politecnico di Milano(米兰理工学院);Department of Mechanical Engineering(机械工程系);Stanford University(斯坦福大学)
Aerial Manipulation: Contact, Medium Coupling, and the Geometry of Readiness
Robotics and Mechatronics lab, Faculty of Electrical Engineering, Mathematics & Computer Science, University of Twente(特温特大学电气工程、数学与计算机科学学院机器人与机电一体化实验室);Department of Computer, Control and Management Engineering, Sapienza University of Rome(罗马第一大学计算机、控制与管理工程系)
FLOAT Drone for Physical Interaction: Lateral Airflow Reduction, Wrench Modeling, and Adaptive Control
Institute of Cyber-Systems and Control, College of Control Science and Engineering, Zhejiang University(浙江大学控制科学与工程学院网络系统与控制研究所);Differential Robotics Technology Company(差分机器人技术公司)
Embodied Intelligence for Sustainable Flight: A Soaring Robot with Active Morphological Control
Learning and Dynamical Systems, Max Planck Institute for Intelligent Systems(马克斯·普朗克智能系统研究所学习与动力系统部门);Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart(斯图加特大学生物力学系统建模与仿真研究所)
Aerobatic maneuvers in insect-scale flapping-wing aerial robots via deep-learned robust tube model predictive control
Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology(电气工程与计算机科学系,麻省理工学院);Department of Aeronautics and Astronautics, Massachusetts Institute of Technology(航空宇航系,麻省理工学院)
Design and Implementation of a High-Precision Wind-Estimation UAV with Onboard Sensors
School of Intelligent Systems Engineering, Sun Yat-sen University(中山大学智能系统工程学院);Department of Computer Science and Engineering, Hong Kong University of Science and Technology(香港科技大学计算机科学与工程系);Shenzhen ZEEY Technology Co., Ltd.(深圳ZEEY科技有限公司)