基于延迟拒绝自适应Metropolis算法的换热器设计新方法
A Novel Heat Exchanger Design Method Using a Delayed Rejection Adaptive Metropolis Hasting Algorithm
摘要:
在这项研究中,管壳式换热器(STHX)设计的基础上,提出了七个连续的独立设计变量。在马尔可夫链蒙特卡罗(MCMC)抽样方法中,采用了延迟拒绝自适应大都会加速(DRAM)。采用反抽样法(RS)求出管壳式换热器设计变量的概率分布。由于这种概率分布,还进行了不确定性分析,以确定这些变量的质量。此外,基于设计变量的置信区间和年总成本(TAC)的决策策略提供了设计变量的最终选择。结果表明,高精度的设计变量的估计,导致性能略有改善相比,常用的优化方法。为了验证所提方法的性能,给出了一个算例,结果表明,与多目标优化方法和单目标优化方法相比,所提方法可以显著降低成本。此外,所选择的变量具有良好的质量(在概率分布方面),并且还实现了较低的TAC。结果表明,所提出的设计成本低于那些从优化方法在以前的研究报告。该算法还被用来确定使用概率值的设计变量,而不是单一的值,以获得最佳的传热面积和泵功率的影响。特别是,在所考虑的情况下,实现了TAC的降低高达3.5%。
英文摘要:
In this study, a shell-and-tube heat exchanger (STHX) design based on seven continuous independent design variables is proposed. Delayed Rejection Adaptive Metropolis hasting (DRAM) was utilized as a powerful tool in the Markov chain Monte Carlo (MCMC) sampling method. This Reverse Sampling (RS) method was used to find the probability distribution of design variables of the shell and tube heat exchanger. Thanks to this probability distribution, an uncertainty analysis was also performed to find the quality of these variables. In addition, a decision-making strategy based on confidence intervals of design variables and on the Total Annual Cost (TAC) provides the final selection of design variables. Results indicated high accuracies for the estimation of design variables which leads to marginally improved performance compared to commonly used optimization methods. In order to verify the capability of the proposed method, a case of study is also presented, it shows that a significant cost reduction is feasible with respect to multi-objective and single-objective optimization methods. Furthermore, the selected variables have good quality (in terms of probability distribution) and a lower TAC was also achieved. Results show that the costs of the proposed design are lower than those obtained from optimization method reported in previous studies. The algorithm was also used to determine the impact of using probability values for the design variables rather than single values to obtain the best heat transfer area and pumping power. In particular, a reduction of the TAC up to 3.5% was achieved in the case considered.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。