We study the behavior of negatively charged colloids with two positively charged polar caps close to a planar patterned surface. The competition between the different anisotropic components of the particle-particle interaction patterns is able by itself to give rise to a rich assembly scenario: colloids with charged surface patterns form different crystalline domains when adsorbed to a homogeneously charged substrate. Here we consider substrates composed of alternating (negative/neutral, positive/neutral and positive/negative) parallel stripes and, by means of Monte Carlo simulations, we investigate the ordering of the colloids on changing the number of the stripes. We show that the additional competition between the two different lengths scales characterizing the system ($i.e.,$ the particle interaction range and the size of the stripes) gives rise to a plethora of distinct particle arrangements, where some well-defined trends can be observed. By accurately tuning the substrate charged motif it is possible to, $e. g.,$ promote specific particles arrangements, disfavor crystalline domains or induce the formation of extended, open clusters.
We introduce the Poisson-Boltzmann cell model for spherical colloidal particles with a heterogeneous surface charge distribution. This model is obtained by generalizing existing cell models for mixtures of homogeneously charged colloidal spheres. Our new model has similar features as Onsager's second-virial theory for liquid crystals, but it predicts no orientational ordering if there is no positional ordering. This implies that all phases of heterogeneously charged colloids that are liquid-like with respect to translational degrees of freedom are also isotropic with respect to particle orient…
We investigate the behavior of colloidal particles immersed in a binary liquid mixture of water and 2,6-lutidine in the presence of a chemically patterned substrate. Close to the critical point of the mixture, the particles are subjected to critical Casimir interactions with force components normal and parallel to the surface. Because the strength and sign of these interactions can be tuned by variations in the surface properties and the mixtures temperature, critical Casimir forces allow the formation of highly ordered monolayers but also extend the use of colloids as model systems.
Recent experiments have demonstrated a fluctuation-induced lateral trapping of spherical colloidal particles immersed in a binary liquid mixture near its critical demixing point and exposed to chemically patterned substrates. Inspired by these experiments, we study this kind of effective interaction, known as the critical Casimir effect, for elongated colloids of cylindrical shape. This adds orientational degrees of freedom. When the colloidal particles are close to a chemically structured substrate, a critical Casimir torque acting on the colloids emerges. We calculate this torque on the basi…
Colloids immersed in a critical or near-critical binary liquid mixture and close to a chemically patterned substrate are subject to normal and lateral critical Casimir forces of dominating strength. For a single colloid we calculate these attractive or repulsive forces and the corresponding critical Casimir potentials within mean-field theory. Within this approach we also discuss the quality of the Derjaguin approximation and apply it to Monte Carlo simulation data available for the system under study. We find that the range of validity of the Derjaguin approximation is rather large and that i…
We study the normal and lateral effective critical Casimir forces acting on a spherical colloid immersed in a critical binary solvent and close to a chemically structured substrate with alternating adsorption preference. We calculate the universal scaling function for the corresponding potential and compare our results with recent experimental data [Soyka F., Zvyagolskaya O., Hertlein C., Helden L., and Bechinger C., Phys. Rev. Lett., 101, 208301 (2008)]. The experimental potentials are properly captured by our predictions only by accounting for geometrical details of the substrate pattern for…
We introduce a new numerical technique, namely triangular tessellation, to calculate the free energy associated with the adsorption of a colloidal particle at a flat interface. The theory and numerical scheme presented here are sufficiently general to handle non-convex patchy colloids with arbitrary surface patterns characterized by a wetting angle, e.g., amphiphilicity. We ignore interfacial deformation due to capillary, electrostatic, or gravitational forces, but the method can be extended to take such effects into account. It is verified that the numerical method presented is accurate and s…
We study the transport of paramagnetic colloidal particles on a patterned magnetic substrate with kinetic Monte Carlo and Brownian dynamics computer simulations. The planar substrate is decorated with point dipoles in either parallel or zigzag stripe arrangements and exposed to an additional external magnetic field that oscillates in time. For the case of parallel stripes we find that the magnitude and direction of the particle current is controlled by the tilt angle of the external magnetic field. The effect is reliably obtained in a wide range of ratios between temperature and magnetic perme…
We generalize the inverse patchy colloid model that was originally developed for heterogeneously charged particles with two identical polar patches and an oppositely charged equator to a model that can have a considerably richer surface pattern. Based on a Debye-Hueckel framework, we propose a coarse-grained description of the effective pair interactions that is applicable to particles with an arbitrary patch decoration. We demonstrate the versatility of this approach by applying it to models with (i) two differently charged and/or sized patches, and (ii) three, possibly different patches.
We study the percolation properties for a system of functionalized colloids on patterned substrates via Monte Carlo simulations. The colloidal particles are modeled as hard disks with three equally-distributed attractive patches on their perimeter. We describe the patterns on the substrate as circular potential wells of radius $R_p$ arranged in a regular square or hexagonal lattice. We find a nonmonotonic behavior of the percolation threshold (packing fraction) as a function of $R_p$. For attractive wells, the percolation threshold is higher than the one for clean (non-patterned) substrates if…
We explore the crystallization in a colloidal monolayer on a structured template starting from a few-particle nucleus. The competition between the substrate structure and that of the growing crystal induces a new crystal growth scenario. Unlike with the crystal growth in the bulk where a well-defined and connected crystal-fluid interface grows into the fluid, we identify a mechanism where a "compatibility wave" of the prescribed nucleus with the underlying substrate structure dictates the growth direction and efficiency. The growth process is strongly anisotropic and proceeds via transient isl…
We study theoretically and experimentally the solvent-mediated critical Casimir force acting on colloidal particles immersed in a binary liquid mixture of water and 2,6-lutidine and close to substrates which are chemically patterned with periodically alternating stripes of antagonistic adsorption preferences. These patterns are experimentally realized via microcontact printing. Upon approaching the critical demixing point of the solvent, normal and lateral critical Casimir forces generate laterally confining effective potentials for the colloids. We analyze in detail the rich behavior of the s…
We simulated an experiment in which a thin colloidal sessile droplet is allowed to dry out on a horizontal hydrophilic surface when a mask just above the droplet predominantly allows evaporation from the droplet free surface directly beneath the holes in the mask [Harris D J, Hu H, Conrad J C and Lewis J A 2007 \textit{Phys. Rev. Lett.} \textbf{98} 148301]. We considered one particular case when centre-to-centre spacing between the holes is much less than the drop diameter. In our model, advection, diffusion, and sedimentation were taken into account. FlexPDE was utilized to solve an advection…
Experiments on supported lipid bilayers featuring liquid ordered/disordered domains have shown that the spatial arrangement of the lipid domains and their chemical composition are strongly affected by the curvature of the substrate. Furthermore, theoretical predictions suggest that both these effects are intimately related with the closed topology of the bilayer. In this work, we test this hypothesis by fabricating supported membranes consisting of colloidal particles of various shapes lying on a flat substrate. A single lipid bilayer coats both colloids and substrate, allowing local lipid exc…
Inverse patchy colloids are nano- to micro-scale particles with a surface divided into differently charged regions. This class of colloids combines directional, selective bonding with a relatively simple particle design: owing to the competitive interplay between the orientation-dependent attraction and repulsion -- induced by the interactions between like/oppositely charged areas -- experimentally accessible surface patterns are complex enough to favor the stabilization of specific structures of interest. Most important, the behavior of heterogeneously charged units can be ideally controlled …
Among the various kinds of effective forces in soft matter, the spatial range and the direction of the so-called critical Casimir force - which is generated by the enhanced thermal fluctuations close to a continuous phase transition - can be controlled and reversibly modified to an uncommonly large extent. In particular, minute temperature changes of the fluid solvent, which provides the near-critical thermal fluctuations, lead to a significant change of the range and strength of the effective interaction among the solute particles. This feature allows one to control, e.g., the aggregation of …
We demonstrate a novel route of spatially organizing the colloid arrangements on the polymer-grafted substrate by use of self-consistent field and density functional theories. We find that grafting of polymers onto a substrate can effectively control spatial dispersions of deposited colloids as a result of the balance between colloidal settling force and entropically elastic force of brushes, and colloids can form unexpected ordered structures on a grafting substrate. The depositing process of colloidal particles onto the elastic "soft" substrate includes two steps: brush-mediated one-dimensio…
We propose the use of topographic modulation of surfaces to select and localize particles in nematic colloids. By considering convex and concave deformations of one of the confining surfaces we show that the colloid-flat surface repulsion may be enhanced or switched into an attraction. In particular, we find that when the colloidal particles have the same anchoring conditions as the patterned surfaces, they are strongly attracted to concave dimples, while if they exhibit different anchoring conditions they are pinned at the top of convex protrusions. Although dominated by elastic interactions …
Patterned Substrates Unlock Self-Electrophoretic Phenomenon in Active Janus Microswimmers
Istituto di BioRobotica-Scuola Superiore Sant’Anna（机器人研究所圣安娜高等学院）；Wageningen University & Research（瓦赫宁根大学与研究）；Center for Materials Interfaces, Electron Crystallography, Italian Institute of Technology（意大利理工学院材料界面与电子晶体学中心）
Colloids self-assemble into various organized superstructures determined by particle interactions. There is a tremendous progress in both the scientific understanding and applications of self-assemblies of single-type identical particles. Forming superstructures in which the colloidal particles occupy predesigned sites and remain in these sites despite thermal fluctuations represents a major challenge of the current state-of-the art. Here we propose a versatile approach to direct placement of colloids using nematic liquid crystals with spatially varying molecular orientation pre-imposed by sub…
The effects of particle roughness and short-ranged non-central forces on colloidal gels are studied using computer simulations in which particles experience a sinusoidal variation in energy as they rotate. The number of minima $n$ and energy scale $K$ are the key parameters; for large $K$ and $n$, particle rotation is strongly hindered, but for small $K$ and $n$ particle rotation is nearly free. A series of systems are simulated and characterized using fractal dimensions, structure factors, coordination number distributions, bond-angle distributions and linear rheology. When particles rotate e…
Spin coating is an out-of-equilibrium technique for producing polymer films and colloidal crystals quickly and reproducibly. In this review, we present an overview of theoretical and experimental studies of the spin coating of colloidal suspensions. The dynamics of the spin coating process is discussed first, and we present insights from both theory and experiment. A key difference between spin coating with polymer solutions and with monodisperse colloidal suspensions is the emergence of long range (centimeter scale) orientational correlations in the latter. We discuss experiments in different…
Density functional theory is used to study colloidal hard-rod fluids near an individual right-angled wedge or edge as well as near a hard wall which is periodically patterned with rectangular barriers. The Zwanzig model, in which the orientations of the rods are restricted to three orthogonal orientations but their positions can vary continuously, is analyzed by numerical minimization of the grand potential. Density and orientational order profiles, excess adsorptions, as well as surface and line tensions are determined. The calculations exhibit an enrichment [depletion] of rods lying parallel…
Placing colloidal particles in predesigned sites represents a major challenge of the current state-of-the-art colloidal science. Nematic liquid crystals with spatially varying director patterns represent a promising approach to achieve a well-controlled placement of colloidal particles thanks to the elastic forces between the particles and the surrounding landscape of molecular orientation. Here we demonstrate how the spatially varying director field can be used to control placement of non-spherical particles of boomerang shape. The boomerang colloids create director distortions of a dipolar s…
This paper reports on the frictional properties of smooth rubber substrates sliding against rigid surfaces covered with various densities of colloidal nano-particles (average diameter 77 nm). Friction experiments were carried out using a transparent Poly(dimethyl siloxane) (PDMS) rubber contacting a silica lens with silica nano-particles sintered onto its surface. Using a previously described methodology (Nguyen \textit{et al.}, \textit{J. of Adhesion} \textbf{87} (2011) 235-250 ), surface shear stress and contact-pressure distribution within the contact were determined from a measurement of t…
Colloidal particles provide an efficient mean of building multiple scale structured materials from colloidal dispersions. In this Brief Report, we account for experimental evidence on the formation of a colloidal cluster array at a three-phase contact line. We study the influence of low frequency external alternating electric fields on a diluted colloidal dispersion opened to the air. We focus on the cluster formation and their evolution in the meniscus by measuring characteristic times and lengths. We observe that the clusters are separated by a well-defined length and that, in our experiment…
In the study of colloidal, biological and electrochemical systems, it is customary to treat surfaces, macromolecules and electrodes as homogeneously charged. This simplified approach is proven successful in most cases, but fails to describe a wide range of heterogeneously charged surfaces commonly used in experiments. For example, recent experiments have revealed a long-range attraction between overall neutral surfaces, locally charged in a mosaic-like structure of positively and negatively charged domains ("patches"). Here we review experimental and theoretical studies addressing the stabilit…
We study experimentally and theoretically the interactions between paramagnetic particles dispersed in water and driven above the surface of a stripe patterned magnetic garnet film. An external rotating magnetic field modulates the stray field of the garnet film and generates a translating potential landscape which induces directed particle motion. By varying the ellipticity of the rotating field, we tune the inter-particle interactions from net attractive to net repulsive. For attractive interactions, we show that pairs of particles can approach each other and form stable doublets which after…
Artificial particle ices are model systems of constrained, interacting particles. They have been introduced theoretically to study ice-manifolds emergent from frustration, along with domain wall and grain boundary dynamics, doping, pinning-depinning, controlled transport of topological defects, avalanches, and memory effects. Recently such particle-based ices have been experimentally realized with vortices in nano-patterned superconductors or gravitationally trapped colloids. Here we demonstrate that, although these ices are generally considered equivalent to magnetic spin ices, they can acces…
The precise arrangement of microscopic objects is critical to the development of functional materials and ornately patterned surfaces. Here, we present an acoustics-based method for the rapid arrangement of microscopic particles into organized and programmable architectures, which are periodically spaced within a square assembly chamber. This macroscale device employs two-dimensional bulk acoustic standing waves to propel particles along the base of the chamber toward pressure nodes or antinodes, depending on the acoustic contrast factor of the particle, and is capable of simultaneously creati…
The electrostatic complexation between DOTAP-DOPC unilamellar liposomes and an oppositely charged polyelectrolyte (NaPA) has been investigated in a wide range of the liposome surface charge density. We systematically characterized the "reentrant condensation" and the charge inversion of polyelectrolyte-decorated liposomes by means of dynamic light scattering and electrophoresis. We explored the stability of this model polyelectrolyte/colloid system by fixing each time the charge of the bare liposomes and by changing two independent control parameters of the suspensions: the polyelectrolyte/col…
The spontaneous assembly of particles in suspension provides a strategy for inexpensive fabrication of devices with nanometer-scale control, such as single-electron transistors for memory or logic applications. A scaleable and robust method to form electrodes with the required nanometer-scale spacing, however, remains a major challenge. Here, we demonstrate a straightforward assembly approach in which metallic colloidal spheres serve as the electrodes. The devices are formed by assembly in suspension followed by deposition onto a patterned substrate. The key to this approach is that the inter-…
There are many examples of driven and active matter systems containing particles that exhibit circular motion with different chiralities, such as swimming bacteria near surfaces or certain types of self-driven colloidal particles. Circular motion of passive particles can also be induced with an external rotating drive. Here we examine particles that move in circles and interact with a periodic array of asymmetric L-shaped obstacles. We find a series of dynamical phases as a function of swimming radius, including regimes where the particle motion is rectified, producing a net dc motion. The dir…
We demonstrate a size sensitive experimental scheme which enables bidirectional transport and fractionation of paramagnetic colloids in a fluid medium. It is shown that two types of magnetic colloidal particles with different sizes can be simultaneously transported in opposite directions, when deposited above a stripe-patterned ferrite garnet film subjected to a square-wave magnetic modulation. Due to their different sizes, the particles are located at distinct elevations above the surface, and they experience two different energy landscapes, generated by the modulated magnetic substrate. By c…
The effects of Brownian motion on particle interactions with heterogeneous collectors are evaluated by adding stochastic Brownian displacements to the particle trajectories and comparing those trajectories to those where Brownian motion is not included. We define adhesion thresholds as the average patch density on the collector required to adhere colloidal particles and Péclet numbers that quantify the relative importance of colloidal, shear and Brownian effects. We show that Brownian motion has a negligible influence on particle trajectories over collectors patterned with nano-scale heterogen…
We performed extensive Monte Carlo simulations of the irreversible adsorption of polydispersed disks inside the cells of a patterned substrate. The model captures relevant features of the irreversible adsorption of spherical colloidal particles on patterned substrates. The pattern consists of (equal) square cells, where adsorption can take place, centered at the vertices of a square lattice. Two independent, dimensionless parameters are required to control the geometry of the pattern, namely, the cell size and cell-cell distance, measured in terms of the average particle diameter. However, to …
In this paper we study the electrostatic properties of `Janus' spheres with unequal charge densities on both hemispheres. We introduce a method to compare primitive-model Monte Carlo simulations of the ionic double layer with predictions of (mean-field) nonlinear Poisson-Boltzmann theory. We also derive practical DLVO-like expressions that describe the Janus-particle pair interactions by mean-field theory. Using a large set of parameters, we are able to probe the range of validity of the Poisson-Boltzmann approximation, and thus of DLVO-like theories, for such particles. For homogeneously char…
We combine experiments, theory and numerical simulation to investigate the dynamics of a binary suspension of paramagnetic colloidal particles dispersed in water and transported above a stripe patterned magnetic garnet film. The substrate generates a one-dimensional periodic energy landscape above its surface. The application of an elliptically polarized rotating magnetic field causes the landscape to translate, inducing direct transport of paramagnetic particles placed above the film. The ellipticity of the applied field can be used to control and tune the interparticle interactions, from net…
Based on extensive Monte Carlo simulations and analytical considerations we study the electrostatically driven adsorption of flexible polyelectrolyte chains onto charged Janus nanospheres. These net-neutral colloids are composed of two equally but oppositely charged hemispheres. The critical binding conditions for polyelectrolyte chains are analysed as function of the radius of the Janus particle and its surface charge density, as well as the salt concentration in the ambient solution. Specifically for the adsorption of finite-length polyelectrolyte chains onto Janus nanoparticles, we demonstr…
Understanding the drift motion and dynamical locking of crystalline clusters on patterned substrates is important for the diffusion and manipulation of nano- and micro-scale objects on surfaces. In a previous work, we studied the orientational and directional locking of colloidal two-dimensional clusters with triangular structure driven across a triangular substrate lattice. Here we show with experiments and simulations that such locking features arise for clusters with arbitrary lattice structure sliding across arbitrary regular substrates. Similar to triangular-triangular contacts, orientati…
