Waveguides in nonlinear materials are a key component for photon pair sources and offer promising solutions to interface quantum memories through frequency conversion. To bring these technologies closer to every-day life, it is still necessary to guarantee a reliable and efficient fabrication of these devices. Therefore, a thorough understanding of the technological limitations of nonlinear waveguiding devices is paramount. In this paper, we study the link between fabrication errors of waveguides in nonlinear crystals and the final performance of such devices. In particular, we first derive a mathematical expression to qualitatively assess the technological limitations of any nonlinear waveguide. We apply this tool to study the impact of fabrication imperfections on the phasematching properties of different quantum processes realized in titanium-diffused lithium niobate waveguides. Finally, we analyse the effect of waveguide imperfections on quantum state generation and manipulation for few selected cases. We find that the main source of phasematching degradation is the correlated variation of the waveguide's dispersion properties and suggest different possible strategies to reduce the impact of fabrication imperfections.
Efficient coupling of single quantum emitters to guided optical modes of integrated optical devices is of high importance for applications in quantum information science as well as in the field of sensing. Here we present the design and fabrication of a platform for on-chip experiments based on dielectric optical single-mode waveguides(Ta2O5 on SiO2). The design of the waveguide is optimized for broadband (600-800 nm) evanescent coupling to a single quantum emitter (expected efficiency: up to 36%) and efficient off-chip coupling to single-mode optical fibers using inverted tapers. First test s…
We experimentally demonstrate the propagation of long-range surface plasmon-polaritons in a nobel metal stripe waveguide at an optical wavelength of 780 nm. To minimize propagation damping the lithographically structured waveguide is produced from a thin gold stripe embedded in a dielectric polymer. Our waveguide geometry supports a symmetric fundamental and anti-symmetric first order mode. For the fundamental mode we measure a propagation loss of $(6.12^{+0.66} _{-0.54})$ dB/mm, in good agreement with numerical simulations using a vectorial eigenmode solver. Our results are a promising starti…
We report on the design of nanohole/nanobeam cavities in ridge waveguides for on-chip, quantum-dot-based single-photon generation. Our design overcomes limitations of a low-refractive-index-contrast material platform in terms of emitter-mode coupling efficiency and yields an outcoupling efficiency of 0.73 to the output ridge waveguide. Importantly, this high coupling efficiency is combined with broadband operation of 9 nm full-width half-maximum. We provide an explicit design procedure for identifying the optimum geometrical parameters according to the developed design. Besides, we fabricate a…
We characterize low-loss electron-beam evaporated niobium thin films deposited under ultra-high vacuum conditions. Slow deposition yields films with a high superconducting transition temperature ($9.20 \pm 0.06 \rm ~K$) as well as a residual resistivity ratio of $4.8$. We fabricate the films into coplanar waveguide resonators to extract the intrinsic loss due to the presence of two-level-system fluctuators using microwave measurements. For a coplanar waveguide resonator gap of $2~μ\rm m$, the films exhibit filling-factor-adjusted two-level-system loss tangents as low as $1.5 \times 10^{-7}$ wi…
A continuous-wave (CW) broadband high-level optical quadrature squeezer is essential for high-speed large-scale fault-tolerant quantum computing on a time-domain-multiplexed continuous-variable optical cluster state. CW THz-bandwidth squeezed light can be obtained with a waveguide optical parametric amplifier (OPA); however, the squeezing level have been insufficient for applications of fault-tolerant quantum computation because of degradation of the squeezing level due to their optical losses caused by the structural perturbation and pump-induced phenomena. Here, by using mechanical polishing…
Nonlinear processes in integrated, guiding systems are fundamental for both classical and quantum experiments. Integrated components allow for compact, modular and stable light-processing systems and as such their use in real-world systems continues to expand. In order to use these devices in the most demanding applications, where efficiency and/or spectral performance are critical, it is important that the devices are fully optimized. In order to achieve these optimizations, it is first necessary to gain a thorough understanding of current fabrication limits and their impact on the devices fi…
Integration of diamond nanobeams with SnVs on Al2O3 waveguides for scalable quantum photonic chip application
Fujitsu Limited（富士通有限公司）；Research Center for Advanced Science and Technology, University of Tokyo（东京大学先进科学技术研究中心）；Delft University of Technology（代尔夫特理工大学）
We present a heuristic mathematical model of the relation between the geometry of a photonic crystal waveguide and the Purcell enhancement factor at a particular wavelength of interest. We use this model to propose approaches to the design of a photonic crystal waveguide maximizing the Purcell enhancement at a target wavelength. Numerical simulations indicate that the proposed structures exhibit robustness to fabrication defects introduced into photonic crystal geometry.
Hexagonal boron nitride (hBN) is gaining interest for potential applications in integrated quantum nanophotonics. Yet, to establish hBN as an integrated photonic platform several cornerstones must be established, including the integration and coupling of quantum emitters to photonic waveguides. Supported by simulations, we study the approach of monolithic integration, which is expected to have coupling efficiencies that are 4 times higher than those of a conventional hybrid stacking strategy. We then demonstrate the fabrication of such devices from hBN and showcase the successful integration o…
The vast development of integrated quantum photonic technology enables the implementation of compact and stable interferometric networks. In particular laser-written waveguide structures allow for complex 3D-circuits and polarization-encoded qubit manipulation. However, the main limitation for the scale-up of integrated quantum devices is the single-photon loss due to mode-profile mismatch when coupling to standard fibers or other optical platforms. Here we demonstrate tapered waveguide structures, realized by an adapted femtosecond laser writing technique. We show that coupling to standard si…
Periodically-tapered-waveguides technique is an emerging potential route to establish quasi-phase-matching schemes for efficient on-demand parametric interactions in third-order nonlinear materials. In this paper, I investigate this method in enhancing spontaneous photon-pairs emission in fibres and planar waveguides with sinusoidally-varying cross sections. I have developed a general robust quantum model to study this process under continuous or pulsed-pump excitations. The model shows a great enhancement in photon-pairs generation in waveguides with a small number of tapering periods that ar…
A solid state emitter coupled to a photonic crystal cavity exhibits increased photon emission into a single frequency mode. However, current designs for photonic crystal cavities coupled to quantum emitters have three main problems: emitters are placed near surfaces that can degrade their optical properties, the cavity fluorescence cannot be collected into a single useful mode for further routing, and post-fabrication tuning is not currently possible in a stable and reversible manner for each node individually. In this paper, we introduce a hybrid cavity design with minimal fabrication of the …
Using quantum theory, we study the propagation of an optical field in an inhomogeneous dielectric, and apply this scheme to traveling optical fields in a waveguide. We introduce a field-atom interaction Hamiltonian and derive the refractive index using quantum optics. We show that the transmission and reflection of optical fields at an interface between different materials can be described with normalized Fresnel coefficients and that this representation is related to the beam splitter operator. We then study the propagation properties of the optical fields for two types of slab waveguides: st…
