Organic molecules such as steroids or amino acids form crystals that can facilitate the formation of ice -- arguably the most important phase transition on earth. However, the origin of the ice nucleating ability of organic crystals is still largely unknown. Here, we combine experiments and simulations to unravel the microscopic details of ice formation on cholesterol, a prototypical organic crystal widely used in cryopreservation. We find that cholesterol -- which is also a substantial component of cell membranes -- is an ice nucleating agent more potent than many inorganic substrates, including the mineral feldspar (one of the most active ice nucleating material in the atmosphere). Scanning electron microscopy measurements reveal a variety of morphological features on the surfaces of cholesterol crystals: this suggests that the topography of the surface is key to the broad range of ice nucleating activity observed (from -4 to -20 C\degree). In addition, we show via molecular simulations that cholesterol crystals aid the formation of ice nuclei in a unconventional fashion. Rather than providing a template for a flat ice-like contact layer (as found in the case of many inorganic substrates), the flexibility of the cholesterol surface and its low density of hydrophilic functional groups leads to the formation of molecular cages involving both water molecules and terminal hydroxyl groups of the cholesterol surface. We argue that the phenomenal ice nucleating activity of steroids such as cholesterol (and potentially of many other organic crystals) is due to (i) the ability of flexible hydrophilic surfaces to form unconventional ice-templating structures and (ii) the different nucleation sites offered by the diverse topography of the crystalline surfaces.
Accurate estimate of nucleation rate is crucial for the study of ice nucleation and ice-promoting/anti-freeze strategies. Within the framework of Classical Nucleation Theory (CNT), the estimate of ice nucleation rate is very sensitive to thermodynamic parameters, such as chemical potential difference between water and ice $Δμ$ and ice-water interfacial free energy $γ$. However, even today, there are still many contradictions and approximations in the estimating of these thermodynamic parameters, introducing large uncertainty to the estimate of the ice nucleation rate. Herein, starting from the…
We use computer simulations to investigate the effect of salt on homogeneous ice nucleation. The melting point of the employed solution model was obtained both by direct coexistence simulations and by thermodynamic integration from previous calculations of the water chemical potential. Using a Seeding approach, in which we simulate ice seeds embedded in a supercooled aqueous solution, we compute the nucleation rate as a function of temperature for a 1.85 NaCl mole per water kilogram solution at 1 bar. To improve the accuracy and reliability of our calculations we combine Seeding with the direc…
We investigate with computer simulations the effect of applying an electric field on the water-to-ice transition. We use a combination of state-of-the-art simulation techniques to obtain phase boundaries and crystal growth rates (direct coexistence), nucleation rates (seeding) and interfacial free energies (seeding and mold integration). First, we consider ice Ih, the most stable polymorph in the absence of a field. Its normal melting temperature, speed of crystal growth and nucleation rate (for a given supercooling) diminish as the intensity of the field goes up. Then, we study polarised cubi…
To predict the radiative forcing of clouds it is necessary to know the rate with which ice homogeneously nucleates in supercooled water. Such rate is often measured in drops to avoid the presence of impurities. At large supercooling small (nanoscopic) drops must be used to prevent simultaneous nucleation events. The pressure inside such drops is larger than the atmospheric one by virtue of the Laplace equation. In this work, we take into account such pressure raise in order to predict the nucleation rate in droplets using the TIP4P/Ice water model. We start from a recent estimate of the maximu…
Ice formation is one of the most common and important processes on earth and almost always occurs at the surface of a material. A basic understanding of how the physicochemical properties of a material's surface affect its ability to form ice has remained elusive. Here, we use molecular dynamics simulations to directly probe heterogeneous ice nucleation at a hexagonal surface of a nanoparticle of varying hydrophilicity. Surprisingly, we find that structurally identical surfaces can both inhibit and promote ice formation and analogous to a chemical catalyst, it is found that an optimal interact…
The solidification behaviour of suspensions of alumina particles during directional solidification is investigated here by in situ observations using X-ray radiography and tomography. The objective of this study is to assess the influence of particle size on the solidification behaviour of the suspensions during the early stages of solidification. Four powders with particle size in the range 0.2-3.4μm (median size) were investigated. Solidification is obtained by cooling at a constant rate, starting from room temperature. Attention is specifically paid to the nucleation and growth behaviour of…
Ice formation is ubiquitous in nature, with important consequences in a variety of environments, including biological cells, soil, aircraft, transportation infrastructure and atmospheric clouds. However, its intrinsic kinetics and microscopic mechanism are difficult to discern with current experiments. Molecular simulations of ice nucleation are also challenging, and direct rate calculations have only been performed for coarse-grained models of wate. For molecular models, only indirect estimates have been obtained, e.g. by assuming the validity of classical nucleation theory. We use a path sam…
In contrast to the abundance of work on the anomalous behavior of water, the relationship between the water's thermodynamic anomalies and kinetics of phase transition from metastable water is relatively unexplored. In this work, we have employed classical density functional theory to provide a unified and coherent picture of nucleation (both vapor and ice) from metastable water, especially at negative pressure conditions. Our results suggest a peculiar non-monotonic temperature dependence of liquid-vapor surface tension at temperatures where liquid-vapor coexistence is metastable with respect …
Ice nucleation is a process of great relevance in physics, chemistry, technology and environmental sciences, much theoretical and experimental efforts have been devoted to its understanding, but still it remains a topic of intense research. We shed light on this phenomenon by performing atomistic based simulations. Using metadynamics and a carefully designed set of collective variables, reversible transitions between water and ice are able to be simulated. We find that water freezes into a stacking disordered structure with the all-atom TIP4P/Ice model, and the features of the critical nucleus…
Acoustic cavitation is known to trigger ice nucleation in supercooled water. Several competing and still debatable mechanisms have been proposed in the literature and are related to the pressure field in the vicinity of the bubble at the end of its collapse. Numerical simulations of the bubble dynamics show that during the bubble expansions in the bounces following the main collapse, the bubble core temperature reaches values far below 0 °C for time periods of about 500 ns. The water vapour present in the bubble during these time intervals explores the liquid and the solid region of the phase …
What makes a material a good ice nucleating agent? Despite the importance of heterogeneous ice nucleation to a variety of fields, from cloud science to microbiology, major gaps in our understanding of this ubiquitous process still prevent us from answering this question. In this work, we have examined the ability of generic crystalline substrates to promote ice nucleation as a function of the hydrophobicity and the morphology of the surface. Nucleation rates have been obtained by brute-force molecular dynamics simulations of coarse-grained water on top of different surfaces of a model fcc crys…
Hydrodynamic flow can have complex and far-reaching consequences on the rate of homogenous nucleation. We present a general formalism for calculating the nucleation rates of simply sheared systems. We have derived an extension to the conventional Classical Nucleation Theory, explicitly embodying the shear rate. Seeded Molecular Dynamics simulations form the backbone of our approach. The framework can be used for moderate supercoolings, at which temperatures brute-force methods are practically infeasible. The competing energetic and kinetic effects of shear arise naturally from the equations. W…
Water is one of the most abundant substances on Earth, and ice, i.e., solid water, has more than 18 known phases. Normally ice in nature exists only as Ice Ih, Ice Ic, or a stacking disordered mixture of both. Although many theoretical efforts have been devoted to understanding the thermodynamics of different ice phases at ambient temperature and pressure, there still remains many puzzles. We simulated the reversible transitions between water and different ice phases by performing full atom molecular dynamics simulations. Using the enhanced sampling method MetaITS with the two selected X-ray d…
Crystallization from a supercooled liquid initially proceeds via the formation of a small solid embryo (nucleus), which requires surmounting an activation barrier. This phenomenon is most easily studied by numerical simulation, using specialized biased-sampling techniques to overcome the limitations imposed by the rarity of nucleation events. Here, I focus on the barrier to homogeneous ice nucleation in supercooled water, as represented by the monatomic-water model, which in the bulk exhibits a complex interplay between different ice structures. I consider various protocols to identify solidli…
In this work, we evaluate by means of computer simulations the rate for ice homogeneous nucleation for several water models such as TIP4P, TIP4P/2005,TIP4P/ICE, and mW (following the same procedure as in Sanz et al. [J. Am. Chem. Soc.135, 15008 (2013)]) in a broad temperature range. We estimate the ice-liquid interfacial free-energy, and conclude that for all water models γ decreases as the temperature decreases. Extrapolating our results to the melting temperature, we obtain a value of the interfacial free-energy between 25 and 32 mN/m in reasonable agreement with the reported experimental va…
Among all the freezing transitions, that of water into ice is probably the most relevant to biology, physics, geology or atmospheric science. In this work we investigate homogeneous ice nucleation by means of computer simulations. We evaluate the size of the critical cluster and the nucleation rate for temperatures ranging between 15K and 35K below melting. We use the TIP4P/2005 and the TIP4P/Ice water models. Both give similar results when compared at the same temperature difference with the model's melting temperature. The size of the critical cluster varies from $\sim$8000 molecules (radius…
The well-known classical nucleation theory (CNT) for the free energy barrier towards formation of a nucleus of critical size of the new stable phase within the parent metastable phase fails to take into account the influence of other metastable phases having density/order intermediate between the parent metastable phase and the final stable phase. This lacuna can be more serious than capillary approximation or spherical shape assumption made in CNT. This issue is particularly significant in ice nucleation because liquid water shows rich phase diagram consisting of two (high and low density) li…
Models without an explicit time dependence, called singular models, are widely used for fitting the distribution of temperatures at which water droplets freeze. In 1950 Levine developed the original singular model. His key assumption was that each droplet contained many nucleation sites, and that freezing occurred due to the nucleation site with the highest freezing temperature. The fact that freezing occurs due to the maximum value out of large number of nucleation temperatures, means that we can apply the results of what is called extreme-value statistics. This is the statistics of the extre…
We present a phase field theory for binary crystal nucleation. In the one-component limit, quantitative agreement is achieved with computer simulations (Lennard-Jones system) and experiments (ice-water system) using model parameters evaluated from the free energy and thickness of the interface. The critical undercoolings predicted for Cu-Ni alloys accord with the measurements, and indicate homogeneous nucleation. The Kolmogorov exponents deduced for dendritic solidification and for "soft-impingement" of particles via diffusion fields are consistent with experiment.
Hypothesis: As a fluid approaches three phase coexistence, adsorption may take place by the successive formation of two intervening wetting films. The equilibrium thickness of these wetting layers is the result of a delicate balance of intermolecular forces, as dictated by an underlying interface potential. The van der Waals forces for the two variable adsorption layers may be formulated exactly from Dzyaloshinskii-Lifshitz-Pitaevskii theory, and analytical approximations may be derived that extent well beyond the validity of conventional Hamaker theory. Calculations: We consider the adsorptio…
Contact freezing is a mode of atmospheric ice nucleation in which a collision between a dry ice nucleating particle (INP) and a water droplet results in considerably faster heterogeneous nucleation. The molecular mechanism of such enhancement is, however, still a mystery. While earlier studies had attributed it to collision-induced transient perturbations, recent experiments point to the pivotal role of nanoscale proximity of the INP and the free interface. By simulating heterogeneous nucleation of ice within INP-supported nanofilms of two model water-like tetrahedral liquids, we demonstrate t…
It has been conjectured that roughness plays a role in surface nucleation, the tendency for freezing to begin preferentially at the liquid-gas interface. Using high speed imaging, we sought evidence for freezing at the contact line on catalyst substrates with imposed characteristic length scales (texture). Length scales consistent with the critical nucleus size and with $δ\sim τ/ σ$, where $τ$ is a relevant line tension and $σ$ is the surface tension, range from nanometers to micron. It is found that nano-scale texture causes a shift in the nucleation of ice in supercooled water to the three-p…
Nucleation plays a critical role in the birth of crystals and is associated with a vast array of phenomena such as protein crystallization and ice formation in clouds. Despite numerous experimental and theoretical studies, many aspects of the nucleation process like the polymorph selection mechanism in the early stages are far from being understood. Here, we show that the excess of particles in a face-centred-cubic (fcc)-like environment with respect to those in a hexagonal-close-packed (hcp)-like environment in a crystal nucleus of hard spheres as observed in simulations and experiments can b…
Finite size artifacts arise in molecular simulations of nucleation when critical nuclei are too close to their periodic images. A rigorous determination of what constitutes too close is, however, a major challenge. Recently, we devised rigorous heuristics for detecting such artifacts based on our investigation of how system size impacts the rate of heterogeneous ice nucleation (Hussain, Haji-Akbari, \emph{J. Chem. Phys.} \textbf{154}, 014108, \textbf{2021}). We identified the prevalence of critical nuclei spanning across the periodic boundary, and the thermodynamic and structural properties of…
A heat exchange interface at subzero temperature in a water vapor environment, exhibits high probability of frost formation due to freezing condensation, a factor that markedly decreases the heat transfer efficacy due to the considerable thermal resistance of ice. Here we report a novel strategy to delay ice nucleation on these types of solid-water vapor interfaces. With a process-driven mechanism, a self-generated liquid intervening layer immiscible to water, is deposited on a textured superhydrophobic surface and acts as a barrier between the water vapor and the solid substrate. This liquid …
Ice accumulation hinders the performance of, and poses safety threats for infrastructure both on the ground and in the air. Previously, rationally designed superhydrophobic surfaces have demonstrated some potential as a passive means to mitigate ice accretion; however, further studies on material solutions that reduce impalement and contact time for impacting supercooled droplets and can also repel droplets that freeze during surface contact are urgently needed. Here we demonstrate the collaborative effect of substrate flexibility and surface nanotexture on enhancing both icephobicity and the …
Using Lifshitz theory we assess the role of van der Waals forces at interfaces of ice and water. The results are combined with measured structural forces from computer simulations to develop a quantitative model of the surface free energy of premelting films. This input is employed within the framework of wetting theory and allows us to predict qualitatively the behavior of quasi-liquid layer thickness as a function of ambient conditions. Our results emphasizes the significance of vapor pressure. The ice vapor interface is shown to exhibit only incomplete premelting, but the situation can shif…
