Background: Magneto- and Electro-encephalography record the electromagnetic field generated by neural currents with high temporal frequency and good spatial resolution, and are therefore well suited for source localization in the time and in the frequency domain. In particular, localization of the generators of neural oscillations is very important in the study of cognitive processes in the healthy and in the pathological brain.
New method: We introduce the use of a Bayesian multi-dipole localization method in the frequency domain. Given the Fourier Transform of the data at one or multiple frequencies and/or trials, the algorithm approximates numerically the posterior distribution with Monte Carlo techniques.
Results: We use synthetic data to show that the proposed method behaves well under a wide range of experimental conditions, including low signal-to-noise ratios and correlated sources. We use dipole clusters to mimic the effect of extended sources. In addition, we test the algorithm on real MEG data to confirm its feasibility.
Comparison with existing method(s): Throughout the whole study, DICS (Dynamic Imaging of Coherent Sources) is used systematically as a benchmark. The two methods provide similar general pictures; the posterior distributions of the Bayesian approach contain much richer information at the price of a higher computational cost.
Conclusions: The Bayesian method described in this paper represents a reliable approach for localization of multiple dipoles in the frequency domain.
We deal with estimation of multiple dipoles from combined MEG and EEG time--series. We use a sequential Monte Carlo algorithm to characterize the posterior distribution of the number of dipoles and their locations. By considering three test cases, we show that using the combined data the method can localize sources that are not easily (or not at all) visible with either of the two individual data alone. In addition, the posterior distribution from combined data exhibits a lower variance, i.e. lower uncertainty, than the posterior from single device.
In the present paper, we develop a novel Bayesian approach to the problem of estimating neural currents in the brain from a fixed distribution of magnetic field (called \emph{topography}), measured by magnetoencephalography. Differently from recent studies that describe inversion techniques, such as spatio-temporal regularization/filtering, in which neural dynamics always plays a role, we face here a purely static inverse problem. Neural currents are modelled as an unknown number of current dipoles, whose state space is described in terms of a variable--dimension model. Within the resulting Ba…
In this paper, we explore the multiple source localisation problem in the cerebral cortex using magnetoencephalography (MEG) data. We model neural currents as point-wise dipolar sources which dynamically evolve over time, then model dipole dynamics using a probabilistic state space model in which dipole locations are strictly constrained to lie within the cortex. Based on the proposed models, we develop a Bayesian particle filtering algorithm for localisation of both known and unknown numbers of dipoles. The algorithm consists of a region of interest (ROI) estimation step for initial dipole nu…
We consider the problems of hypothesis testing and model comparison under a flexible Bayesian linear regression model whose formulation is closely connected with the linear mixed effect model and the parametric models for SNP set analysis in genetic association studies. We derive a class of analytic approximate Bayes factors and illustrate their connections with a variety of frequentist test statistics, including the Wald statistic and the variance component score statistic. Taking advantage of Bayesian model averaging and hierarchical modeling, we demonstrate some distinct advantages and flex…
Just Another Gibbs Sampling (JAGS) is a convenient tool to draw posterior samples using Markov Chain Monte Carlo for Bayesian modeling. However, the built-in function dinterval() to model censored data misspecifies the computation of deviance function, which may limit its usage to perform likelihood based model comparison. To establish an automatic approach to specify the correct deviance function in JAGS, we propose a simple alternative modeling strategy to implement Bayesian model selection for analysis of censored outcomes. The proposed approach is applicable to a broad spectrum of data typ…
We have developed a sophisticated statistical model for predicting the hitting performance of Major League baseball players. The Bayesian paradigm provides a principled method for balancing past performance with crucial covariates, such as player age and position. We share information across time and across players by using mixture distributions to control shrinkage for improved accuracy. We compare the performance of our model to current sabermetric methods on a held-out season (2006), and discuss both successes and limitations.
Item response theory (IRT) is a popular modeling paradigm for measuring subject latent traits and item properties according to discrete responses in tests or questionnaires. There are very limited discussions on heterogeneity pattern detection for both items and individuals. In this paper, we introduce a nonparametric Bayesian approach for clustering items and individuals simultaneously under the Rasch model. Specifically, our proposed method is based on the mixture of finite mixtures (MFM) model. MFM obtains the number of clusters and the clustering configurations for both items and individua…
In this paper we present a Bayesian competing risk proportional hazards model to describe mortgage defaults and prepayments. We develop Bayesian inference for the model using Markov chain Monte Carlo methods. Implementation of the model is illustrated using actual default/prepayment data and additional insights that can be obtained from the Bayesian analysis are discussed.
Brain function is organized in coordinated modes of spatio-temporal activity (functional networks) exhibiting an intrinsic baseline structure with variations under different experimental conditions. Existing approaches for uncovering such network structures typically do not explicitly model shared and differential patterns across networks, thus potentially reducing the detection power. We develop an integrative modeling approach for jointly modeling multiple brain networks across experimental conditions. The proposed Bayesian Joint Network Learning approach develops flexible priors on the edge…
Bayesian fused lasso is one of the sparse Bayesian methods, which shrinks both regression coefficients and their successive differences simultaneously. In this paper, we propose a Bayesian fused lasso modeling via horseshoe prior. By assuming a horseshoe prior on the difference of successive regression coefficients, the proposed method enables us to prevent over-shrinkage of those differences. We also propose a Bayesian hexagonal operator for regression with shrinkage and equality selection (HORSES) with horseshoe prior, which imposes priors on all combinations of differences of regression coe…
The INLA package provides a tool for computationally efficient Bayesian modeling and inference for various widely used models, more formally the class of latent Gaussian models. It is a non-sampling based framework which provides approximate results for Bayesian inference, using sparse matrices. The swift uptake of this framework for Bayesian modeling is rooted in the computational efficiency of the approach and catalyzed by the demand presented by the big data era. In this paper, we present new developments within the INLA package with the aim to provide a computationally efficient mechanism …
Two data-dependent information metrics are developed to quantify the information of the prior and likelihood functions within a parametric Bayesian model, one of which is closely related to the reference priors from Berger, Bernardo, and Sun, and information measure introduced by Lindley. A combination of theoretical, empirical, and computational support provides evidence that these information-theoretic metrics may be useful diagnostic tools when performing a Bayesian analysis.
The Covid-19 pandemic has spread across the world since the beginning of 2020. Many regions have experienced its effects. The state of South Carolina in the USA has seen cases since early March 2020 and a primary peak in early April 2020. A lockdown was imposed on April 6th but lifting of restrictions started on April 24th. The daily case and death data as reported by NCHS (deaths) via the New York Times GitHUB repository have been analyzed and approaches to modeling of the data are presented. Prediction is also considered and the role of asymptomatic transmission is assessed as a latent unobs…
Many of the data, particularly in medicine and disease mapping are count. Indeed, the under or overdispersion problem in count data distrusts the performance of the classical Poisson model. For taking into account this problem, in this paper, we introduce a new Bayesian structured additive regression model, called gamma count, with enough flexibility in modeling dispersion. Setting convenient prior distributions on the model parameters is a momentous issue in Bayesian statistics that characterize the nature of our uncertainty parameters. Relying on a recently proposed class of penalized comple…
Motivated by a computer experiment for the design of a rocket booster, this paper explores nonstationary modeling methodologies that couple stationary Gaussian processes with treed partitioning. Partitioning is a simple but effective method for dealing with nonstationarity. The methodological developments and statistical computing details which make this approach efficient are described in detail. In addition to providing an analysis of the rocket booster simulator, our approach is demonstrated to be effective in other arenas.
This paper describes the Bayesian SIR modeling of the 3 waves of Covid-19 in two contrasting US states during 2020-2021. A variety of models are evaluated at the county level for goodness-of-fit and an assessment of confounding predictors is also made. It is found that models with three deprivation predictors and neighborhood effects are important. In addition the work index from Google mobility was also found to provide increased explanation of the transmission dynamic.
Being in the era of big data, modeling and prediction of count data have become significantly important in many fields including health, finance, social, etc. Although linear Poisson regression has been widely used to model count and rate data, it might not be always suitable as it cannot capture some inherent variability within complex data. In this study, we introduce a probabilistically driven nonlinear Poisson regression model with Bayesian artificial neural networks (ANN) to model count or rate data. This new nonlinear Poisson regression model developed with Bayesian ANN provides higher p…
Growth curves are commonly used in modeling aimed at crop yield prediction. Fitting such curves often depends on availability of detailed observations, such as individual grape bunch weight or individual apple weight. However, in practice, aggregated weights (such as a bucket of grape bunches or apples) are available instead. While treating such bucket averages as if they were individual observations is tempting, it may introduce bias particularly with respect to population variance. In this paper we provide an elegant solution which enables estimation of individual weights using Dirichlet pri…
This tutorial shows how to build, fit, and criticize disease transmission models in Stan, and should be useful to researchers interested in modeling the SARS-CoV-2 pandemic and other infectious diseases in a Bayesian framework. Bayesian modeling provides a principled way to quantify uncertainty and incorporate both data and prior knowledge into the model estimates. Stan is an expressive probabilistic programming language that abstracts the inference and allows users to focus on the modeling. As a result, Stan code is readable and easily extensible, which makes the modeler's work more transpare…
Mean plausible values can be computed when Bayesian structural equation modeling (BSEM) is performed. As mean plausible values do not preserve the inter-factor correlations, they yield path coefficients that are different from the estimated path coefficients of the model. As it might be of interest to perform exactly the same prediction on the level of plausible values that has been estimated by BSEM, correlation-preserving mean plausible values were proposed. An example for the computation of the correlation preserving mean plausible values is given and the corresponding syntax is given in th…
Demographic studies of cosmic populations must contend with measurement errors and selection effects. We survey some of the key ideas astronomers have developed to deal with these complications, in the context of galaxy surveys and the literature on corrections for Malmquist and Eddington bias. From the perspective of modern statistics, such corrections arise naturally in the context of multilevel models, particularly in Bayesian treatments of such models: hierarchical Bayesian models. We survey some key lessons from hierarchical Bayesian modeling, including shrinkage estimation, which is clos…
In this study, we present a Bayesian hierarchical framework to model fluid-induced seismicity. The framework is based on a non-homogeneous Poisson process (NHPP) with a fluid-induced seismicity rate proportional to the rate of injected fluid. The fluid-induced seismicity rate model depends upon a set of physically meaningful parameters, and has been validated for six fluid-induced case studies. In line with the vision of hierarchical Bayesian modeling, the rate parameters are considered as random variables. We develop both the Bayesian inference and updating rules, which are used to develop a …
Compositional data consist of known compositions vectors whose components are positive and defined in the interval (0,1) representing proportions or fractions of a "whole". The sum of these components must be equal to one. Compositional data is present in different knowledge areas, as in geology, economy, medicine among many others. In this paper, we introduce a Bayesian analysis for compositional regression applying additive log-ratio (ALR) transformation and assuming uncorrelated and correlated errors. The Bayesian inference procedure based on Markov Chain Monte Carlo Methods (MCMC). The met…
Spatial process models are widely used for modeling point-referenced variables arising from diverse scientific domains. Analyzing the resulting random surface provides deeper insights into the nature of latent dependence within the studied response. We develop Bayesian modeling and inference for rapid changes on the response surface to assess directional curvature along a given trajectory. Such trajectories or curves of rapid change, often referred to as \emph{wombling} boundaries, occur in geographic space in the form of rivers in a flood plain, roads, mountains or plateaus or other topograph…
Univariate or multivariate ordinal responses are often assumed to arise from a latent continuous parametric distribution, with covariate effects which enter linearly. We introduce a Bayesian nonparametric modeling approach for univariate and multivariate ordinal regression, which is based on mixture modeling for the joint distribution of latent responses and covariates. The modeling framework enables highly flexible inference for ordinal regression relationships, avoiding assumptions of linearity or additivity in the covariate effects. In standard parametric ordinal regression models, computat…
A paired comparison analysis is the simplest way to make comparative judgments between objects where objects may be goods, services or skills. For a set of problems, this technique helps to choose the most important problem to solve first and/or provides the solution that will be the most effective. This paper presents the theory of paired comparisons method and contributes to the paired comparisons models by developing a new model based on t-distribution. The developed model is illustrated using a data set of citations among four famous journals of Statistics. Using Bayesian analysis, the jou…
Inverse problems with spatiotemporal observations are ubiquitous in scientific studies and engineering applications. In these spatiotemporal inverse problems, observed multivariate time series are used to infer parameters of physical or biological interests. Traditional solutions for these problems often ignore the spatial or temporal correlations in the data (static model), or simply model the data summarized over time (time-averaged model). In either case, the data information that contains the spatiotemporal interactions is not fully utilized for parameter learning, which leads to insuffici…
We consider the problem of flexible modeling of higher order Markov chains when an upper bound on the order of the chain is known but the true order and nature of the serial dependence are unknown. We propose Bayesian nonparametric methodology based on conditional tensor factorizations, which can characterize any transition probability with a specified maximal order. The methodology selects the important lags and captures higher order interactions among the lags, while also facilitating calculation of Bayes factors for a variety of hypotheses of interest. We design efficient Markov chain Monte…
Public sentiment is a direct public-centric indicator for the success of effective action planning. Despite its importance, systematic modeling of public sentiment remains untapped in previous studies. This research aims to develop a Bayesian-based approach for quantitative public sentiment modeling, which is capable of incorporating uncertainty and guiding the selection of public sentiment measures. This study comprises three steps: (1) quantifying prior sentiment information and new sentiment observations with Dirichlet distribution and multinomial distribution respectively; (2) deriving the…
Modeling with multidimensional arrays, or tensors, often presents a problem due to high dimensionality. In addition, these structures typically exhibit inherent sparsity, requiring the use of regularization methods to properly characterize an association between a tensor covariate and a scalar response. We propose a Bayesian method to efficiently model a scalar response with a tensor covariate using the Tucker tensor decomposition in order to retain the spatial relationship within a tensor coefficient, while reducing the number of parameters varying within the model and applying regularization…
Stan is an open-source probabilistic programing language, primarily designed to do Bayesian data analysis. Its main inference algorithm is an adaptive Hamiltonian Monte Carlo sampler, supported by state of the art gradient computation. Stan's strengths include efficient computation, an expressive language which offers a great deal of flexibility, and numerous diagnostics that allow modelers to check whether the inference is reliable. Torsten extends Stan with a suite of functions that facilitate the specification of pharmacokinetic and pharmacodynamic models, and makes it straightforward to sp…
This article introduces an R package to perform statistical analysis for task-based fMRI data at both individual and group levels. The analysis to detect brain activation at the individual level is based on modeling the fMRI signal using Matrix-Variate Dynamic Linear Models (MDLM). Therefore, the analysis for the group stage is based on posterior distributions of the state parameter obtained from the modeling at the individual level. In this way, this package offers several R functions with different algorithms to perform inference on the state parameter to assess brain activation for both ind…
As in many fields of dynamic modeling, the long runtime of hydrological models hinders Bayesian inference of model parameters from data. By replacing a model with an approximation of its output as a function of input and/or parameters, emulation allows us to complete this task by trading-off accuracy for speed. We combine (i) the use of a mechanistic emulator, (ii) low-discrepancy sampling of the parameter space, and (iii) iterative refinement of the design data set, to perform Bayesian inference with a very small design data set constructed with 128 model runs in a parameter space of up to ei…
In this paper, a Bayesian spatial voting model is applied for the first time to characterize the legislative behavior of the Senate of the Republic of Colombia for the period 2006-2010. The analysis is carried out based on the plenary nominal votes of the Senate. The estimation of the model is done using Markov Monte Carlo chain algorithms. The estimated ideal points provide empirical evidence supporting a latent non-ideological feature (opposition--non-opposition) underlying senators' voting. Additionally, the relationship between the parapolitics scandal and the legislative behavior of senat…
Joint modeling of spatially-oriented dependent variables is commonplace in the environmental sciences, where scientists seek to estimate the relationships among a set of environmental outcomes accounting for dependence among these outcomes and the spatial dependence for each outcome. Such modeling is now sought for massive data sets with variables measured at a very large number of locations. Bayesian inference, while attractive for accommodating uncertainties through hierarchical structures, can become computationally onerous for modeling massive spatial data sets because of its reliance on i…
We present a Bayesian hierarchical modeling approach to paleoclimate reconstruction using borehole temperature profiles. The approach relies on modeling heat conduction in solids via the heat equation with step function, surface boundary conditions. Our analysis includes model error and assumes that the boundary conditions are random processes. The formulation also enables separation of measurement error and model error. We apply the analysis to data from nine borehole temperature records from the San Rafael region in Utah. We produce ground surface temperature histories with uncertainty estim…
We present a case study and methodological developments in large-scale hierarchical dynamic modeling for personalized prediction in commerce. The context is supermarket sales, where improved forecasting of customer/household-specific purchasing behavior informs decisions about personalized pricing and promotions on a continuing basis. This is a big data, big modeling and forecasting setting involving many thousands of customers and items on sale, requiring sequential analysis, addressing information flows at multiple levels over time, and with heterogeneity of customer profiles and item catego…
We propose a statistical modeling technique, called the Hierarchical Association Rule Model (HARM), that predicts a patient's possible future medical conditions given the patient's current and past history of reported conditions. The core of our technique is a Bayesian hierarchical model for selecting predictive association rules (such as "condition 1 and condition 2 $\rightarrow$ condition 3") from a large set of candidate rules. Because this method "borrows strength" using the conditions of many similar patients, it is able to provide predictions specialized to any given patient, even when l…
Bayesian Additive Regression Trees (BART) is a flexible machine learning algorithm capable of capturing nonlinearities between an outcome and covariates and interaction among covariates. We extend BART to a semiparametric regression framework in which the conditional expectation of an outcome is a function of treatment, its effect modifiers, and confounders. The confounders, not of scientific interest, are allowed to have unspecified functional form, while treatment and other covariates that do have scientific importance are given the usual linear form from parametric regression. The result is…
The fused lasso penalizes a loss function by the $L_1$ norm for both the regression coefficients and their successive differences to encourage sparsity of both. In this paper, we propose a Bayesian generalized fused lasso modeling based on a normal-exponential-gamma (NEG) prior distribution. The NEG prior is assumed into the difference of successive regression coefficients. The proposed method enables us to construct a more versatile sparse model than the ordinary fused lasso by using a flexible regularization term. We also propose a sparse fused algorithm to produce exact sparse solutions. Si…
A new Bayesian modeling method is proposed by combining the maximization of the marginal likelihood with a momentum-space renormalization group transformation for Gaussian graphical models. Moreover, we present a scheme for computint the statistical averages of hyperparameters and mean square errors in our proposed method based on a momentumspace renormalization transformation.