基于膨胀试验的超薄屈曲膜表征方法
A bulge test based methodology for characterizing ultra-thin buckled membranes
摘要:
随着基于超薄膜的系统的进一步小型化和发展,屈曲膜变得越来越重要。众所周知,通常被认为是表征独立式薄膜的金标准的膨胀测试方法不适合表征屈曲膜,因为压缩残余应力和可忽略的面外弯曲刚度。当加压时,屈曲的膜立即开始进入波纹状态,但它们通常在达到圆柱状态之前塑性变形或破裂。在本文中,膨胀试验方法的扩展,使屈曲的独立式超薄膜的波纹制度的表征。在实验-数值相结合的方法中,数字高度相关的先进技术首先扩展到亚微米尺度,以实现在小至约25微米的总感兴趣区域中的单个波纹顶部上的高度变化的局部3D应变和曲率场的测量。随后,建立了一个有限元(FE)模型来分析后屈曲膜在压力载荷下。在看似复杂的波纹配置,一个合适的组合的局部区域的兴趣和压力范围被确定为应力应变状态可以从局部应变和曲率场提取。这使得能够从单个膨胀样品中提取杨氏模量和泊松比,与传统的膨胀测试方法相反。虚拟实验证明了该方法的可行性,而该方法的原理的真实证明证明了相当窄(约25微米)的波纹的易碎试样。
英文摘要:
Buckled membranes become ever more important with further miniaturization and development of ultra-thin film based systems. It is well established that the bulge test method, generally considered the gold standard for characterizing freestanding thin films, is unsuited to characterize buckled membranes, because of compressive residual stresses and a negligible out-of-plane bending stiffness. When pressurized, buckled membranes immediately start entering the ripple regime, but they typically plastically deform or fracture before reaching the cylindrical regime. In this paper the bulge test method is extended to enable characterization of buckled freestanding ultra-thin membranes in the ripple regime. In a combined experimental-numerical approach, the advanced technique of digital height correlation was first extended towards the sub-micron scale, to enable measurement of the highly varying local 3D strain and curvature fields on top of a single ripple in a total region of interest as small as approximately 25 microns. Subsequently, a finite element (FE) model was set up to analyze the post-buckled membrane under pressure loading. In the seemingly complex ripple configuration, a suitable combination of local region of interest and pressure range was identified for which the stress-strain state can be extracted from the local strain and curvature fields. This enables the extraction of both the Young's modulus and Poisson's ratio from a single bulge sample, contrary to the conventional bulge test method. Virtual experiments demonstrate the feasibility of the approach, while real proof of principle of the method was demonstrated for fragile specimens with rather narrow ( approximately 25 microns) ripples.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。