用自混合干涉法探测多脉冲laser消融
Probing multipulse laser ablation by means of self-mixing interferometry
摘要:
在这项工作中,自混合干涉(SMI)实现内联到激光微钻系统监测加工过程中,通过探测烧蚀诱导羽。建立了基于Sedov-Taylor爆炸波方程的多脉冲激光冲击钻削过程羽流扩展的解析模型。在不锈钢、铜合金、纯钛和氮化钛陶瓷涂层上进行了激光微钻盲孔的信号采集。从信号测量最大光程差以估计折射率变化。通过将分析模型拟合到所测量的光程差来导出振幅系数。钻孔的形态进行了研究的最大孔深和浮渣高度。结果表明,当烧蚀过程以蒸发为主时,SMI信号上升,显著改变了加工区的折射率。这种烧蚀条件对应于浮渣的有限形成。结果表明,SMI可以作为一种非侵入性的工具,在激光微加工应用程序中的过程质量的间接监测。
英文摘要:
In this work, self-mixing interferometry (SMI) is implemented inline to a laser microdrilling system to monitor the machining process by probing the ablation-induced plume. An analytical model based on the Sedov-Taylor blast wave equation is developed for the expansion of the process plume under multiple-pulse laser percussion drilling conditions. Signals were acquired during laser microdrilling of blind holes on stainless steel, copper alloy, pure titanium, and titanium nitride ceramic coating. The maximum optical path difference was measured from the signals to estimate the refractive index changes. An amplitude coefficient was derived by fitting the analytical model to the measured optical path differences. The morphology of the drilled holes was investigated in terms of maximum hole depth and dross height. The results indicate that the SMI signal rises when the ablation process is dominated by vaporization, changing the refractive index of the processing zone significantly. Such ablation conditions correspond to limited formation of dross. The results imply that SMI can be used as a nonintrusive tool in laser micromachining applications for monitoring the process quality in an indirect way.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。