arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1807.10315eess.SYcs.SY
收藏

非均匀采样非线性系统的离散时间模型的半全局稳定性特性分析

Characterization of semiglobal stability properties for discrete-time models of non-uniformly sampled nonlinear systems

Alexis J. Vallarella, Hernan Haimovich

AI总结:

本文研究非均匀采样非线性系统的离散时间模型稳定性,提出半全局渐近稳定性和抗扰输入到状态稳定性的必要充分条件,解决传统方法在采样率变化和测量误差下的局限性。

摘要:

非均匀采样非线性系统的离散时间模型在零阶保持器作用下,将下一个状态样本与当前状态样本、(常数)输入值和采样间隔相关联。精确的离散时间模型,即状态与连续时间非线性系统在采样时刻匹配的模型,可能难以甚至无法获得。在此背景下,分析稳定性的一种方法是基于近似离散时间模型和精确与近似模型之间误差的界。该方法需要三个概念上不同的任务:i) 确保离散时间模型的稳定性;ii) 确保近似模型的稳定性可推广到精确模型;iii) 如果需要,对采样间的行为进行界。现有的确保离散时间模型稳定性的条件存在一些或全部以下缺点:仅是充分而非必要;不允许多变采样率;在存在状态测量或执行误差时无法应用。本文通过提供半全局渐近稳定性和抗扰输入到状态稳定的必要充分条件,克服了这些缺点,其中半全局渐近稳定性是鲁棒的,抗扰输入到状态稳定性中,(扰动)输入可以成功代表状态测量或执行误差。

英文摘要:

Discrete-time models of non-uniformly sampled nonlinear systems under zero-order hold relate the next state sample to the current state sample, (constant) input value, and sampling interval. The exact discrete-time model, that is, the discrete-time model whose state matches that of the continuous-time nonlinear system at the sampling instants may be difficult or even impossible to obtain. In this context, one approach to the analysis of stability is based on the use of an approximate discrete-time model and a bound on the mismatch between the exact and approximate models. This approach requires three conceptually different tasks: i) ensure the stability of the (approximate) discrete-time model, ii) ensure that the stability of the approximate model carries over to the exact model, iii) if necessary, bound intersample behaviour. Existing conditions for ensuring the stability of a discrete-time model as per task i) have some or all of the following drawbacks: are only sufficient but not necessary; do not allow for varying sampling rate; cannot be applied in the presence of state-measurement or actuation errors. In this paper, we overcome these drawbacks by providing characterizations of, i.e. necessary and sufficient conditions for, two stability properties: semiglobal asymptotic stability, robustly with respect to bounded disturbances, and semiglobal input-to-state stability, where the (disturbance) input may successfully represent state-measurement or actuation errors. Our results can be applied when sampling is not necessarily uniform.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑